Re: [PATCH 4/6] media: rcar-vin: add support for V4L2_FIELD_ALTERNATE

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 




On 07/29/2016 07:40 PM, Niklas Söderlund wrote:
> The HW can capture both ODD and EVEN fields in separate buffers so it's
> possible to support this field mode.
> 
> Signed-off-by: Niklas Söderlund <niklas.soderlund+renesas@xxxxxxxxxxxx>
> ---
>  drivers/media/platform/rcar-vin/rcar-dma.c  | 26 ++++++++++++++++++++------
>  drivers/media/platform/rcar-vin/rcar-v4l2.c | 12 ++++++++++++
>  2 files changed, 32 insertions(+), 6 deletions(-)
> 
> diff --git a/drivers/media/platform/rcar-vin/rcar-dma.c b/drivers/media/platform/rcar-vin/rcar-dma.c
> index dad3b03..bcdec46 100644
> --- a/drivers/media/platform/rcar-vin/rcar-dma.c
> +++ b/drivers/media/platform/rcar-vin/rcar-dma.c
> @@ -95,6 +95,7 @@
>  /* Video n Module Status Register bits */
>  #define VNMS_FBS_MASK		(3 << 3)
>  #define VNMS_FBS_SHIFT		3
> +#define VNMS_FS			(1 << 2)
>  #define VNMS_AV			(1 << 1)
>  #define VNMS_CA			(1 << 0)
>  
> @@ -147,6 +148,7 @@ static int rvin_setup(struct rvin_dev *vin)
>  	case V4L2_FIELD_INTERLACED_BT:
>  		vnmc = VNMC_IM_FULL | VNMC_FOC;
>  		break;
> +	case V4L2_FIELD_ALTERNATE:
>  	case V4L2_FIELD_NONE:
>  		if (vin->continuous) {
>  			vnmc = VNMC_IM_ODD_EVEN;
> @@ -322,15 +324,26 @@ static bool rvin_capture_active(struct rvin_dev *vin)
>  	return rvin_read(vin, VNMS_REG) & VNMS_CA;
>  }
>  
> -static int rvin_get_active_slot(struct rvin_dev *vin)
> +static int rvin_get_active_slot(struct rvin_dev *vin, u32 vnms)
>  {
>  	if (vin->continuous)
> -		return (rvin_read(vin, VNMS_REG) & VNMS_FBS_MASK)
> -			>> VNMS_FBS_SHIFT;
> +		return (vnms & VNMS_FBS_MASK) >> VNMS_FBS_SHIFT;
>  
>  	return 0;
>  }
>  
> +static enum v4l2_field rvin_get_active_field(struct rvin_dev *vin, u32 vnms)
> +{
> +	if (vin->format.field == V4L2_FIELD_ALTERNATE) {
> +		/* If FS is set it's a Even field */
> +		if (vnms & VNMS_FS)
> +			return V4L2_FIELD_BOTTOM;
> +		return V4L2_FIELD_TOP;
> +	}
> +
> +	return vin->format.field;
> +}
> +
>  static void rvin_set_slot_addr(struct rvin_dev *vin, int slot, dma_addr_t addr)
>  {
>  	const struct rvin_video_format *fmt;
> @@ -871,7 +884,7 @@ static bool rvin_fill_hw(struct rvin_dev *vin)
>  static irqreturn_t rvin_irq(int irq, void *data)
>  {
>  	struct rvin_dev *vin = data;
> -	u32 int_status;
> +	u32 int_status, vnms;
>  	int slot;
>  	unsigned int sequence, handled = 0;
>  	unsigned long flags;
> @@ -898,7 +911,8 @@ static irqreturn_t rvin_irq(int irq, void *data)
>  	}
>  
>  	/* Prepare for capture and update state */
> -	slot = rvin_get_active_slot(vin);
> +	vnms = rvin_read(vin, VNMS_REG);
> +	slot = rvin_get_active_slot(vin, vnms);
>  	sequence = vin->sequence++;
>  
>  	vin_dbg(vin, "IRQ %02d: %d\tbuf0: %c buf1: %c buf2: %c\tmore: %d\n",
> @@ -913,7 +927,7 @@ static irqreturn_t rvin_irq(int irq, void *data)
>  		goto done;
>  
>  	/* Capture frame */
> -	vin->queue_buf[slot]->field = vin->format.field;
> +	vin->queue_buf[slot]->field = rvin_get_active_field(vin, vnms);
>  	vin->queue_buf[slot]->sequence = sequence;
>  	vin->queue_buf[slot]->vb2_buf.timestamp = ktime_get_ns();
>  	vb2_buffer_done(&vin->queue_buf[slot]->vb2_buf, VB2_BUF_STATE_DONE);
> diff --git a/drivers/media/platform/rcar-vin/rcar-v4l2.c b/drivers/media/platform/rcar-vin/rcar-v4l2.c
> index b6e40ea..00ac2b6 100644
> --- a/drivers/media/platform/rcar-vin/rcar-v4l2.c
> +++ b/drivers/media/platform/rcar-vin/rcar-v4l2.c
> @@ -109,6 +109,7 @@ static int rvin_reset_format(struct rvin_dev *vin)
>  		.which = V4L2_SUBDEV_FORMAT_ACTIVE,
>  	};
>  	struct v4l2_mbus_framefmt *mf = &fmt.format;
> +	v4l2_std_id std;
>  	int ret;
>  
>  	fmt.pad = vin->src_pad_idx;
> @@ -122,9 +123,19 @@ static int rvin_reset_format(struct rvin_dev *vin)
>  	vin->format.colorspace	= mf->colorspace;
>  	vin->format.field	= mf->field;
>  
> +	/* If we have a video standard use HW to deinterlace */
> +	if (vin->format.field == V4L2_FIELD_ALTERNATE &&
> +	    !v4l2_subdev_call(vin_to_source(vin), video, g_std, &std)) {
> +		if (std & V4L2_STD_625_50)
> +			vin->format.field = V4L2_FIELD_INTERLACED_TB;
> +		else
> +			vin->format.field = V4L2_FIELD_INTERLACED_BT;
> +	}

Huh? ALTERNATE means that the fields are captured separately, i.e. one buffer
per field.

There is no HW deinterlacing going on in that case, and ALTERNATE is certainly
not equal to FIELD_INTERLACED_BT/TB.

If ALTERNATE is chosen as the field format, then VIDIOC_G_FMT should return
ALTERNATE as the field format, but in struct v4l2_buffer the field will always
be TOP or BOTTOM.

> +
>  	switch (vin->format.field) {
>  	case V4L2_FIELD_TOP:
>  	case V4L2_FIELD_BOTTOM:
> +	case V4L2_FIELD_ALTERNATE:
>  		vin->format.height /= 2;
>  		break;
>  	case V4L2_FIELD_NONE:
> @@ -222,6 +233,7 @@ static int __rvin_try_format(struct rvin_dev *vin,
>  	switch (pix->field) {
>  	case V4L2_FIELD_TOP:
>  	case V4L2_FIELD_BOTTOM:
> +	case V4L2_FIELD_ALTERNATE:
>  		pix->height /= 2;
>  		source->height /= 2;
>  		break;
> 

Regards,

	Hans
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html



[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux