On Sat, Jul 30, 2016 at 03:19:27PM +0200, Ole Ernst wrote: > This partly reverts commit 078600f514a12fd763ac84c86af68ef5b5267563. > > Due to the relocation of input_register_device() call, holding down a > button on an IR remote no longer resulted in repeated key down events. > > Signed-off-by: Ole Ernst <olebowle@xxxxxxx> Tested-by: Matthias Reichl <hias@xxxxxxxxx> I tested on Raspberry Pi model B with kernel 4.7.0, gpio-rc-recv, rc-hauppauge keymap and with this patch key repeat is working fine again. Thanks a lot for the quick fix! Hias > --- > drivers/media/rc/rc-main.c | 9 ++++----- > 1 file changed, 4 insertions(+), 5 deletions(-) > > diff --git a/drivers/media/rc/rc-main.c b/drivers/media/rc/rc-main.c > index 8e7f292..26fd63b 100644 > --- a/drivers/media/rc/rc-main.c > +++ b/drivers/media/rc/rc-main.c > @@ -1460,6 +1460,10 @@ int rc_register_device(struct rc_dev *dev) > dev->input_dev->phys = dev->input_phys; > dev->input_dev->name = dev->input_name; > > + rc = input_register_device(dev->input_dev); > + if (rc) > + goto out_table; > + > /* > * Default delay of 250ms is too short for some protocols, especially > * since the timeout is currently set to 250ms. Increase it to 500ms, > @@ -1475,11 +1479,6 @@ int rc_register_device(struct rc_dev *dev) > */ > dev->input_dev->rep[REP_PERIOD] = 125; > > - /* rc_open will be called here */ > - rc = input_register_device(dev->input_dev); > - if (rc) > - goto out_table; > - > path = kobject_get_path(&dev->dev.kobj, GFP_KERNEL); > dev_info(&dev->dev, "%s as %s\n", > dev->input_name ?: "Unspecified device", path ?: "N/A"); > -- > 2.9.0 > -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
