Hi! This revision implements the pad translation between rcar-vin and subdevices as suggested by Niklas. It also moves around the i2c devices, following the introduction of i2c multiplexing in the Gen2 device trees. Based on renesas-drivers-2016-07-19-v4.7-rc7. CU Uli Changes since v5: - implement vin/subdev pad translation - move i2c devices Changes since v4: - drop merged patches - adv7604: always fall back to input 0 if nothing else is specified - rcar-vin: implement G_EDID, S_EDID in place of hard-coded EDID blob Changes since v3: - rvin_enum_dv_timings(): use vin->src_pad_idx - rvin_dv_timings_cap(): likewise - rvin_s_dv_timings(): update vin->format - add Koelsch support Changes since v2: - rebased on top of rcar-vin driver v4 - removed "adv7604: fix SPA register location for ADV7612" (picked up) - changed prefix of dts patch to "ARM: dts: lager: " Hans Verkuil (1): ARM: dts: koelsch: add HDMI input Ulrich Hecht (2): media: adv7604: automatic "default-input" selection rcar-vin: implement EDID control ioctls William Towle (1): ARM: dts: lager: Add entries for VIN HDMI input support arch/arm/boot/dts/r8a7790-lager.dts | 39 +++++++++++++++++++++++++++ arch/arm/boot/dts/r8a7791-koelsch.dts | 41 +++++++++++++++++++++++++++++ drivers/media/i2c/adv7604.c | 5 +++- drivers/media/platform/rcar-vin/rcar-v4l2.c | 33 +++++++++++++++++++++++ 4 files changed, 117 insertions(+), 1 deletion(-) -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
