Am 17.07.2016 um 10:59 schrieb Antti Palosaari:
> On 07/16/2016 11:05 PM, Stefan Pöschel wrote:
>> Am 15.07.2016 um 08:21 schrieb Antti Palosaari:
>>> Applied and PULL requested for 4.7.
>>
>> Great, thanks!
>>
>>> Anyhow, it does not apply for 4.6. You must backport that patch to 4.6
>>> stable also!
>>
>> I have never done backporting before, so I need some advice I think:
>> Am I right that I have to create the patch, now just based on tag "v4.6"
>> of the media_tree repo?
>
> Just make patch that compiles and works against kernel tag v4.6. No need to backport it to media_tree or media_build. It should go 4.6 kernel stable tree.
Please find the backport patch below. Is sending to this ML here enough or are there any further steps needed to do by me?
Regards,
Stefan
-------------------------------------
The value 5 of the EEPROM_TS_MODE register (meaning dual tuner presence) is
only valid for AF9035 devices. For IT9135 devices it is invalid and led to a
false positive dual tuner mode detection with PCTV 79e.
Therefore on non-AF9035 devices and with value 5 the driver now defaults to
single tuner mode and outputs a regarding info message to log.
This fixes Bugzilla bug #118561.
(backport of 4.7)
Reported-by: Marc Duponcheel <marc@xxxxxxxxxx>
Signed-off-by: Stefan Pöschel <basic.master@xxxxxx>
---
drivers/media/usb/dvb-usb-v2/af9035.c | 53 +++++++++++++++++++++++------------
drivers/media/usb/dvb-usb-v2/af9035.h | 2 +-
2 files changed, 36 insertions(+), 19 deletions(-)
diff --git a/drivers/media/usb/dvb-usb-v2/af9035.c b/drivers/media/usb/dvb-usb-v2/af9035.c
index 2638e32..14dbfeb 100644
--- a/drivers/media/usb/dvb-usb-v2/af9035.c
+++ b/drivers/media/usb/dvb-usb-v2/af9035.c
@@ -475,7 +475,8 @@ static struct i2c_algorithm af9035_i2c_algo = {
static int af9035_identify_state(struct dvb_usb_device *d, const char **name)
{
struct state *state = d_to_priv(d);
- int ret;
+ int ret, ts_mode_invalid;
+ u8 tmp;
u8 wbuf[1] = { 1 };
u8 rbuf[4];
struct usb_req req = { CMD_FW_QUERYINFO, 0, sizeof(wbuf), wbuf,
@@ -511,6 +512,38 @@ static int af9035_identify_state(struct dvb_usb_device *d, const char **name)
state->eeprom_addr = EEPROM_BASE_AF9035;
}
+
+ /* check for dual tuner mode */
+ ret = af9035_rd_reg(d, state->eeprom_addr + EEPROM_TS_MODE, &tmp);
+ if (ret < 0)
+ goto err;
+
+ ts_mode_invalid = 0;
+ switch (tmp) {
+ case 0:
+ break;
+ case 1:
+ case 3:
+ state->dual_mode = true;
+ break;
+ case 5:
+ if (state->chip_type != 0x9135 && state->chip_type != 0x9306)
+ state->dual_mode = true; /* AF9035 */
+ else
+ ts_mode_invalid = 1;
+ break;
+ default:
+ ts_mode_invalid = 1;
+ }
+
+ dev_dbg(&d->udev->dev, "%s: ts mode=%d dual mode=%d\n",
+ __func__, tmp, state->dual_mode);
+
+ if (ts_mode_invalid)
+ dev_info(&d->udev->dev, "%s: ts mode=%d not supported, defaulting to single tuner mode!",
+ __func__, tmp);
+
+
ret = af9035_ctrl_msg(d, &req);
if (ret < 0)
goto err;
@@ -680,11 +713,7 @@ static int af9035_download_firmware(struct dvb_usb_device *d,
* which is done by master demod.
* Master feeds also clock and controls power via GPIO.
*/
- ret = af9035_rd_reg(d, state->eeprom_addr + EEPROM_TS_MODE, &tmp);
- if (ret < 0)
- goto err;
-
- if (tmp == 1 || tmp == 3 || tmp == 5) {
+ if (state->dual_mode) {
/* configure gpioh1, reset & power slave demod */
ret = af9035_wr_reg_mask(d, 0x00d8b0, 0x01, 0x01);
if (ret < 0)
@@ -817,18 +846,6 @@ static int af9035_read_config(struct dvb_usb_device *d)
}
-
- /* check if there is dual tuners */
- ret = af9035_rd_reg(d, state->eeprom_addr + EEPROM_TS_MODE, &tmp);
- if (ret < 0)
- goto err;
-
- if (tmp == 1 || tmp == 3 || tmp == 5)
- state->dual_mode = true;
-
- dev_dbg(&d->udev->dev, "%s: ts mode=%d dual mode=%d\n", __func__,
- tmp, state->dual_mode);
-
if (state->dual_mode) {
/* read 2nd demodulator I2C address */
ret = af9035_rd_reg(d,
diff --git a/drivers/media/usb/dvb-usb-v2/af9035.h b/drivers/media/usb/dvb-usb-v2/af9035.h
index df22001..d50ff15 100644
--- a/drivers/media/usb/dvb-usb-v2/af9035.h
+++ b/drivers/media/usb/dvb-usb-v2/af9035.h
@@ -112,7 +112,7 @@ static const u32 clock_lut_it9135[] = {
* 0 TS
* 1 DCA + PIP
* 3 PIP
- * 5 DCA + PIP
+ * 5 DCA + PIP (AF9035 only)
* n DCA
*
* Values 0, 3 and 5 are seen to this day. 0 for single TS and 3/5 for dual TS.
--
2.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
