This document need some changes to be properly parsed by Sphinx. Signed-off-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxxx> --- Documentation/media/dvb-drivers/index.rst | 1 + Documentation/media/dvb-drivers/technisat.rst | 148 +++++++++++++++----------- 2 files changed, 85 insertions(+), 64 deletions(-) diff --git a/Documentation/media/dvb-drivers/index.rst b/Documentation/media/dvb-drivers/index.rst index 0574c2e7e0ff..7db298f3c6ce 100644 --- a/Documentation/media/dvb-drivers/index.rst +++ b/Documentation/media/dvb-drivers/index.rst @@ -27,4 +27,5 @@ License". faq lmedm04 opera-firmware + technisat contributors diff --git a/Documentation/media/dvb-drivers/technisat.rst b/Documentation/media/dvb-drivers/technisat.rst index f0cc4f2d8365..f80f4ecc1560 100644 --- a/Documentation/media/dvb-drivers/technisat.rst +++ b/Documentation/media/dvb-drivers/technisat.rst @@ -1,78 +1,98 @@ How to set up the Technisat/B2C2 Flexcop devices ================================================ -1) Find out what device you have -================================ +.. note:: + + This documentation is outdated. + +Author: Uwe Bugla <uwe.bugla@xxxxxx> August 2009 + +Find out what device you have +----------------------------- Important Notice: The driver does NOT support Technisat USB 2 devices! First start your linux box with a shipped kernel: -lspci -vvv for a PCI device (lsusb -vvv for an USB device) will show you for example: -02:0b.0 Network controller: Techsan Electronics Co Ltd B2C2 FlexCopII DVB chip / - Technisat SkyStar2 DVB card (rev 02) -dmesg | grep frontend may show you for example: -DVB: registering frontend 0 (Conexant CX24123/CX24109)... +.. code-block:: none -2) Kernel compilation: -====================== + lspci -vvv for a PCI device (lsusb -vvv for an USB device) will show you for example: + 02:0b.0 Network controller: Techsan Electronics Co Ltd B2C2 FlexCopII DVB chip / + Technisat SkyStar2 DVB card (rev 02) + + dmesg | grep frontend may show you for example: + DVB: registering frontend 0 (Conexant CX24123/CX24109)... + +Kernel compilation: +------------------- If the Flexcop / Technisat is the only DVB / TV / Radio device in your box - get rid of unnecessary modules and check this one: -"Multimedia support" => "Customise analog and hybrid tuner modules to build" +get rid of unnecessary modules and check this one: + +``Multimedia support`` => ``Customise analog and hybrid tuner modules to build`` + In this directory uncheck every driver which is activated there - (except "Simple tuner support" for ATSC 3rd generation only -> see case 9 please). +(except ``Simple tuner support`` for ATSC 3rd generation only -> see case 9 please). Then please activate: -2a) Main module part: -"Multimedia support" => "DVB/ATSC adapters" - => "Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters" - -a.) => "Technisat/B2C2 Air/Sky/Cable2PC PCI" (PCI card) or -b.) => "Technisat/B2C2 Air/Sky/Cable2PC USB" (USB 1.1 adapter) - and for troubleshooting purposes: -c.) => "Enable debug for the B2C2 FlexCop drivers" - -2b) Frontend / Tuner / Demodulator module part: -"Multimedia support" => "DVB/ATSC adapters" - => "Customise the frontend modules to build" "Customise DVB frontends" => - -1.) SkyStar DVB-S Revision 2.3: -a.) => "Zarlink VP310/MT312/ZL10313 based" -b.) => "Generic I2C PLL based tuners" - -2.) SkyStar DVB-S Revision 2.6: -a.) => "ST STV0299 based" -b.) => "Generic I2C PLL based tuners" - -3.) SkyStar DVB-S Revision 2.7: -a.) => "Samsung S5H1420 based" -b.) => "Integrant ITD1000 Zero IF tuner for DVB-S/DSS" -c.) => "ISL6421 SEC controller" - -4.) SkyStar DVB-S Revision 2.8: -a.) => "Conexant CX24123 based" -b.) => "Conexant CX24113/CX24128 tuner for DVB-S/DSS" -c.) => "ISL6421 SEC controller" - -5.) AirStar DVB-T card: -a.) => "Zarlink MT352 based" -b.) => "Generic I2C PLL based tuners" - -6.) CableStar DVB-C card: -a.) => "ST STV0297 based" -b.) => "Generic I2C PLL based tuners" - -7.) AirStar ATSC card 1st generation: -a.) => "Broadcom BCM3510" - -8.) AirStar ATSC card 2nd generation: -a.) => "NxtWave Communications NXT2002/NXT2004 based" -b.) => "Generic I2C PLL based tuners" - -9.) AirStar ATSC card 3rd generation: -a.) => "LG Electronics LGDT3302/LGDT3303 based" -b.) "Multimedia support" => "Customise analog and hybrid tuner modules to build" - => "Simple tuner support" - -Author: Uwe Bugla <uwe.bugla@xxxxxx> August 2009 + +- Main module part: + + ``Multimedia support`` => ``DVB/ATSC adapters`` => ``Technisat/B2C2 FlexcopII(b) and FlexCopIII adapters`` + + #) => ``Technisat/B2C2 Air/Sky/Cable2PC PCI`` (PCI card) or + #) => ``Technisat/B2C2 Air/Sky/Cable2PC USB`` (USB 1.1 adapter) + and for troubleshooting purposes: + #) => ``Enable debug for the B2C2 FlexCop drivers`` + +- Frontend / Tuner / Demodulator module part: + + ``Multimedia support`` => ``DVB/ATSC adapters`` + => ``Customise the frontend modules to build`` ``Customise DVB frontends`` => + + - SkyStar DVB-S Revision 2.3: + + #) => ``Zarlink VP310/MT312/ZL10313 based`` + #) => ``Generic I2C PLL based tuners`` + + - SkyStar DVB-S Revision 2.6: + + #) => ``ST STV0299 based`` + #) => ``Generic I2C PLL based tuners`` + + - SkyStar DVB-S Revision 2.7: + + #) => ``Samsung S5H1420 based`` + #) => ``Integrant ITD1000 Zero IF tuner for DVB-S/DSS`` + #) => ``ISL6421 SEC controller`` + + - SkyStar DVB-S Revision 2.8: + + #) => ``Conexant CX24123 based`` + #) => ``Conexant CX24113/CX24128 tuner for DVB-S/DSS`` + #) => ``ISL6421 SEC controller`` + + - AirStar DVB-T card: + + #) => ``Zarlink MT352 based`` + #) => ``Generic I2C PLL based tuners`` + + - CableStar DVB-C card: + + #) => ``ST STV0297 based`` + #) => ``Generic I2C PLL based tuners`` + + - AirStar ATSC card 1st generation: + + #) => ``Broadcom BCM3510`` + + - AirStar ATSC card 2nd generation: + + #) => ``NxtWave Communications NXT2002/NXT2004 based`` + #) => ``Generic I2C PLL based tuners`` + + - AirStar ATSC card 3rd generation: + + #) => ``LG Electronics LGDT3302/LGDT3303 based`` + #) ``Multimedia support`` => ``Customise analog and hybrid tuner modules to build`` => ``Simple tuner support`` + -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
