On 07/14/2016 08:27 AM, tiffany lin wrote:
> Hi Hans,
>
>
> On Mon, 2016-07-11 at 06:32 +0200, Hans Verkuil wrote:
>> Hi Tiffany,
>>
>> My apologies for the delay, but here is my review at last:
>>
>> On 05/30/2016 09:52 AM, Tiffany Lin wrote:
>>> This patch add g/s_selection support for MT8173
>>>
>>> Signed-off-by: Tiffany Lin <tiffany.lin@xxxxxxxxxxxx>
>>> ---
>>> drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c | 74 ++++++++++++++++++++
>>> 1 file changed, 74 insertions(+)
>>>
>>> diff --git a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c
>>> index 6e72d73..23ef9a1 100644
>>> --- a/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c
>>> +++ b/drivers/media/platform/mtk-vcodec/mtk_vcodec_enc.c
>>> @@ -630,6 +630,77 @@ static int vidioc_try_fmt_vid_out_mplane(struct file *file, void *priv,
>>> return vidioc_try_fmt(f, fmt);
>>> }
>>>
>>> +static int vidioc_venc_g_selection(struct file *file, void *priv,
>>> + struct v4l2_selection *s)
>>> +{
>>> + struct mtk_vcodec_ctx *ctx = fh_to_ctx(priv);
>>> + struct mtk_q_data *q_data;
>>> +
>>> + /* crop means compose for output devices */
>>> + switch (s->target) {
>>> + case V4L2_SEL_TGT_CROP_DEFAULT:
>>> + case V4L2_SEL_TGT_CROP_BOUNDS:
>>> + case V4L2_SEL_TGT_CROP:
>>> + case V4L2_SEL_TGT_COMPOSE_DEFAULT:
>>> + case V4L2_SEL_TGT_COMPOSE_BOUNDS:
>>> + case V4L2_SEL_TGT_COMPOSE:
>>> + if (s->type != V4L2_BUF_TYPE_VIDEO_OUTPUT) {
>>> + mtk_v4l2_err("Invalid s->type = %d", s->type);
>>> + return -EINVAL;
>>> + }
>>> + break;
>>> + default:
>>> + mtk_v4l2_err("Invalid s->target = %d", s->target);
>>> + return -EINVAL;
>>> + }
>>> +
>>> + q_data = mtk_venc_get_q_data(ctx, s->type);
>>> + if (!q_data)
>>> + return -EINVAL;
>>> +
>>> + s->r.top = 0;
>>> + s->r.left = 0;
>>> + s->r.width = q_data->visible_width;
>>> + s->r.height = q_data->visible_height;
>>> +
>>> + return 0;
>>> +}
>>> +
>>> +static int vidioc_venc_s_selection(struct file *file, void *priv,
>>> + struct v4l2_selection *s)
>>> +{
>>> + struct mtk_vcodec_ctx *ctx = fh_to_ctx(priv);
>>> + struct mtk_q_data *q_data;
>>> +
>>> + switch (s->target) {
>>> + case V4L2_SEL_TGT_CROP_DEFAULT:
>>> + case V4L2_SEL_TGT_CROP_BOUNDS:
>>> + case V4L2_SEL_TGT_CROP:
>>> + case V4L2_SEL_TGT_COMPOSE_DEFAULT:
>>> + case V4L2_SEL_TGT_COMPOSE_BOUNDS:
>>> + case V4L2_SEL_TGT_COMPOSE:
>>> + if (s->type != V4L2_BUF_TYPE_VIDEO_OUTPUT) {
>>> + mtk_v4l2_err("Invalid s->type = %d", s->type);
>>> + return -EINVAL;
>>> + }
>>> + break;
>>> + default:
>>> + mtk_v4l2_err("Invalid s->target = %d", s->target);
>>> + return -EINVAL;
>>> + }
>>> +
>>> + q_data = mtk_venc_get_q_data(ctx, s->type);
>>> + if (!q_data)
>>> + return -EINVAL;
>>> +
>>> + s->r.top = 0;
>>> + s->r.left = 0;
>>> + q_data->visible_width = s->r.width;
>>> + q_data->visible_height = s->r.height;
>>
>> This makes no sense.
>>
>> See this page:
>>
>> https://hverkuil.home.xs4all.nl/spec/media.html#selection-api
>>
>> For the video output direction (memory -> HW encoder) the data source is
>> the memory, the data sink is the HW encoder. For the video capture direction
>> (HW encoder -> memory) the data source is the HW encoder and the data sink
>> is the memory.
>>
>> Usually for m2m devices the video output direction may support cropping and
>> the video capture direction may support composing.
>>
>> It's not clear what you intend here, especially since you set left and right
>> to 0. That's not what the selection operation is supposed to do.
>>
> I am confused about about g/s_selection.
> If application want to configure encode area and crop meta-data, it
> should set crop info to OUTPUT queue, is that right?
> if user space still use g/s_crop ioctl, in
> v4l_g_crop and v4l_s_crop, it set target to V4L2_SEL_TGT_COMPOSE_ACTIVE
> when buf type is V4L2_TYPE_IS_OUTPUT.
>
> It looks like when work with g/s_crop ioctl, command set to OUTPUT
> buffer will use target V4L2_SEL_TGT_COMPOSE_ACTIVE.
Correct. The semantics of g/s_crop for output devices is really weird
and g/s_crop is generally useless for mem2mem devices.
You should completely ignore the old g/s_crop and only look at g/s_selection.
> When work with g/s_selection ictol, command set to OUTPUT buffer will
> use V4L2_SEL_TGT_CROP_ACTIVE.
> Is this correct behavior?
Yes. What this means is that userspace has to use g/s_selection for
mem2mem devices since g/s_crop changes the wrong thing: compose instead
of crop for OUTPUT and crop instead of compose for CAPTURE.
The g/s_selection ioctls were added to solve this problem with g/s_crop.
It always confuses people and it was due to a lack of foresight when the
old crop API was designed: it was made for video capture where you
crop on the hardware side (in the video receiver), and for video output it
would compose the image in the video transmitter's total frame (usually
720x480/576). None of this applies in general to memory-to-memory devices.
Regards,
Hans
>
>
> static int v4l_g_crop(const struct v4l2_ioctl_ops *ops,
> struct file *file, void *fh, void *arg)
> {
> struct v4l2_crop *p = arg;
> struct v4l2_selection s = {
> .type = p->type,
> };
> int ret;
>
> if (ops->vidioc_g_crop)
> return ops->vidioc_g_crop(file, fh, p);
> /* simulate capture crop using selection api */
>
> /* crop means compose for output devices */
> if (V4L2_TYPE_IS_OUTPUT(p->type))
> s.target = V4L2_SEL_TGT_COMPOSE_ACTIVE;
> else
> s.target = V4L2_SEL_TGT_CROP_ACTIVE;
>
> ret = ops->vidioc_g_selection(file, fh, &s);
>
> /* copying results to old structure on success */
> if (!ret)
> p->c = s.r;
> return ret;
> }
>
> static int v4l_s_crop(const struct v4l2_ioctl_ops *ops,
> struct file *file, void *fh, void *arg)
> {
> struct v4l2_crop *p = arg;
> struct v4l2_selection s = {
> .type = p->type,
> .r = p->c,
> };
>
> if (ops->vidioc_s_crop)
> return ops->vidioc_s_crop(file, fh, p);
> /* simulate capture crop using selection api */
>
> /* crop means compose for output devices */
> if (V4L2_TYPE_IS_OUTPUT(p->type))
> s.target = V4L2_SEL_TGT_COMPOSE_ACTIVE;
> else
> s.target = V4L2_SEL_TGT_CROP_ACTIVE;
>
> return ops->vidioc_s_selection(file, fh, &s);
> }
>
>
> best regards,
> Tiffany
>
>
>
>
>> Regards,
>>
>> Hans
>>
>>> +
>>> + return 0;
>>> +}
>>> +
>>> static int vidioc_venc_qbuf(struct file *file, void *priv,
>>> struct v4l2_buffer *buf)
>>> {
>>> @@ -688,6 +759,9 @@ const struct v4l2_ioctl_ops mtk_venc_ioctl_ops = {
>>>
>>> .vidioc_create_bufs = v4l2_m2m_ioctl_create_bufs,
>>> .vidioc_prepare_buf = v4l2_m2m_ioctl_prepare_buf,
>>> +
>>> + .vidioc_g_selection = vidioc_venc_g_selection,
>>> + .vidioc_s_selection = vidioc_venc_s_selection,
>>> };
>>>
>>> static int vb2ops_venc_queue_setup(struct vb2_queue *vq,
>>>
>
>
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
