Place documentation for this ioctl on its own page.
Signed-off-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxxx>
---
.../uapi/rc/lirc-set-measure-carrier-mode.rst | 48 ++++++++++++++++++++++
.../media/uapi/rc/lirc_device_interface.rst | 1 +
Documentation/media/uapi/rc/lirc_ioctl.rst | 9 ----
3 files changed, 49 insertions(+), 9 deletions(-)
create mode 100644 Documentation/media/uapi/rc/lirc-set-measure-carrier-mode.rst
diff --git a/Documentation/media/uapi/rc/lirc-set-measure-carrier-mode.rst b/Documentation/media/uapi/rc/lirc-set-measure-carrier-mode.rst
new file mode 100644
index 000000000000..e145d9d1902d
--- /dev/null
+++ b/Documentation/media/uapi/rc/lirc-set-measure-carrier-mode.rst
@@ -0,0 +1,48 @@
+.. -*- coding: utf-8; mode: rst -*-
+
+.. _lirc_set_measure_carrier_mode:
+
+***********************************
+ioctl LIRC_SET_MEASURE_CARRIER_MODE
+***********************************
+
+Name
+====
+
+LIRC_SET_MEASURE_CARRIER_MODE - enable or disable measure mode
+
+Synopsis
+========
+
+.. cpp:function:: int ioctl( int fd, int request, __u32 *enable )
+
+Arguments
+=========
+
+``fd``
+ File descriptor returned by open().
+
+``request``
+ LIRC_SET_MEASURE_CARRIER_MODE
+
+``enable``
+ enable = 1 means enable measure mode, enable = 0 means disable measure
+ mode.
+
+
+Description
+===========
+
+.. _lirc-mode2-frequency:
+
+Enable or disable measure mode. If enabled, from the next key
+press on, the driver will send ``LIRC_MODE2_FREQUENCY`` packets. By
+default this should be turned off.
+
+
+Return Value
+============
+
+On success 0 is returned, on error -1 and the ``errno`` variable is set
+appropriately. The generic error codes are described at the
+:ref:`Generic Error Codes <gen-errors>` chapter.
diff --git a/Documentation/media/uapi/rc/lirc_device_interface.rst b/Documentation/media/uapi/rc/lirc_device_interface.rst
index 9e57779ca2a6..2810253ba852 100644
--- a/Documentation/media/uapi/rc/lirc_device_interface.rst
+++ b/Documentation/media/uapi/rc/lirc_device_interface.rst
@@ -25,4 +25,5 @@ LIRC Device Interface
lirc-set-send-carrier
lirc-set-transmitter-mask
lirc-set-rec-timeout-reports
+ lirc-set-measure-carrier-mode
lirc_ioctl
diff --git a/Documentation/media/uapi/rc/lirc_ioctl.rst b/Documentation/media/uapi/rc/lirc_ioctl.rst
index d99fa0eeef4c..d220fc233e6d 100644
--- a/Documentation/media/uapi/rc/lirc_ioctl.rst
+++ b/Documentation/media/uapi/rc/lirc_ioctl.rst
@@ -54,15 +54,6 @@ device can rely on working with the default settings initially.
Set send/receive mode. Largely obsolete for send, as only
``LIRC_MODE_PULSE`` is supported.
-.. _LIRC_SET_MEASURE_CARRIER_MODE:
-.. _lirc-mode2-frequency:
-
-``LIRC_SET_MEASURE_CARRIER_MODE``
-
- Enable (1)/disable (0) measure mode. If enabled, from the next key
- press on, the driver will send ``LIRC_MODE2_FREQUENCY`` packets. By
- default this should be turned off.
-
.. _LIRC_SET_WIDEBAND_RECEIVER:
``LIRC_SET_WIDEBAND_RECEIVER``
--
2.7.4
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
