This is the fifth version of the OV5645 camera sensor driver patchset. Two one-line changes since version 4: - return current format on set_format; - return all frame sizes when enumerating them. Only one change since version 3: - build failure on kernel v4.7-rc1 fixed: s/media_entity_init/media_entity_pads_init/ Changes from version 2 include: - external camera clock configuration is moved from DT to driver; - pwdn-gpios renamed to enable-gpios; - switched polarity of reset-gpios to the more intuitive active low; - added Kconfig dependency to OF; - return values checks; - regulators and gpios are now required (not optional); - regulators names renamed; - power counter variable changed to a bool power state; - ov5645_registered() is removed and sensor id reading moved to probe(). Changes from version 1 include: - patch split to dt binding doc patch and driver patch; - changes in power on/off logic - s_power is now not called on open/close; - using assigned-clock-rates in dt for setting camera external clock rate; - correct api for gpio handling; - return values checks; - style fixes. Todor Tomov (2): media: i2c/ov5645: add the device tree binding document media: Add a driver for the ov5645 camera sensor. .../devicetree/bindings/media/i2c/ov5645.txt | 50 + drivers/media/i2c/Kconfig | 12 + drivers/media/i2c/Makefile | 1 + drivers/media/i2c/ov5645.c | 1371 ++++++++++++++++++++ 4 files changed, 1434 insertions(+) create mode 100644 Documentation/devicetree/bindings/media/i2c/ov5645.txt create mode 100644 drivers/media/i2c/ov5645.c -- 1.9.1 -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
