The ADV7180 and ADV7182 transmit whole fields, bottom field followed
by top (or vice-versa, depending on detected video standard). So
for chips that do not have support for explicitly setting the field
mode, set the field mode to SEQ_BT for PAL, and SEQ_TB for NTSC (there
seems to be conflicting info on field order of PAL vs NTSC, so follow
what is in adv7183.c).
Signed-off-by: Steve Longerbeam <steve_longerbeam@xxxxxxxxxx>
---
drivers/media/i2c/adv7180.c | 18 +++++++++++++++---
1 file changed, 15 insertions(+), 3 deletions(-)
diff --git a/drivers/media/i2c/adv7180.c b/drivers/media/i2c/adv7180.c
index 4c2623f..c12fca7 100644
--- a/drivers/media/i2c/adv7180.c
+++ b/drivers/media/i2c/adv7180.c
@@ -743,10 +743,17 @@ static int adv7180_set_pad_format(struct v4l2_subdev *sd,
switch (format->format.field) {
case V4L2_FIELD_NONE:
if (!(state->chip_info->flags & ADV7180_FLAG_I2P))
- format->format.field = V4L2_FIELD_INTERLACED;
+ format->format.field =
+ (state->curr_norm & V4L2_STD_525_60) ?
+ V4L2_FIELD_SEQ_TB : V4L2_FIELD_SEQ_BT;
break;
default:
- format->format.field = V4L2_FIELD_INTERLACED;
+ if (state->chip_info->flags & ADV7180_FLAG_I2P)
+ format->format.field = V4L2_FIELD_INTERLACED;
+ else
+ format->format.field =
+ (state->curr_norm & V4L2_STD_525_60) ?
+ V4L2_FIELD_SEQ_TB : V4L2_FIELD_SEQ_BT;
break;
}
@@ -1416,9 +1423,14 @@ static int adv7180_probe(struct i2c_client *client,
return -ENOMEM;
state->client = client;
- state->field = V4L2_FIELD_INTERLACED;
state->chip_info = (struct adv7180_chip_info *)id->driver_data;
+ if (state->chip_info->flags & ADV7180_FLAG_I2P)
+ state->field = V4L2_FIELD_INTERLACED;
+ else
+ state->field = (state->curr_norm & V4L2_STD_525_60) ?
+ V4L2_FIELD_SEQ_TB : V4L2_FIELD_SEQ_BT;
+
ret = adv7180_of_parse(state);
if (ret)
return ret;
--
1.9.1
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
