Hi Gabriel, >From what I can remember, card=60 and audio_clock_override=0x00187de7 did the trick for analogue PAL-I. See http://marc.info/?l=linux-video&m=116859373521663&w=2 Cheers Paul -----Original Message----- From: video4linux-list-bounces@xxxxxxxxxx [mailto:video4linux-list-bounces@xxxxxxxxxx] On Behalf Of hermann pitton Sent: 17 September 2009 23:56 To: Gabriel Dos Santos Cc: video4linux-list@xxxxxxxxxx; linux-media@xxxxxxxxxxxxxxx Subject: Re: LifeView LR307Q Mini PCI Hi Gabriel, Am Donnerstag, den 17.09.2009, 13:14 +0000 schrieb Gabriel Dos Santos: > > Hi, I recently got a mini PCI LifeView LR307Q Hybrid TV Tuner. > I want to use it to tune analog tv (digital would be a plus but it is not really important to me). The card works perfectly (Analog and digital) on the same machine with Windows. Card subsystem is identified as 4e42:4307, which I didn't find in the list of supported cards by v4l. However, tHis forum (http://lists.zerezo.com/video4linux/msg15910.html) reports the card to be working (except for radio) with card=60 and audio_clock_override=0x00187de7 parameters to the module. > However, I am unable to make sound work . my, this is close to three years back! The only reports we ever had were from Paul and he tried across different cards and it was never finished. It has no radio and only one single RF in connector. BTW, do you know about an extra fan for cooling the tuner? Likely not anymore on a tda8275ac1 and mini PCI. > I am in Spain, which means norm = PAL-BG I think. I am using Ubuntu > 9.04 (kernel 2.6.18-11) That is a nightmare of wasting time. Given that all card entries were still volatile that time, especially for gpio settings, I would to have to dig out on what exactly version Paul was and compare it to an Ubuntu 2.6.18-11. Ugh! On what you really are? They do down port several kernel versions without problems, but card=109 is a few away from vanilla 2.6.18. To add more, AFAIK, in Spain you use NICAM-BG for stereo sound and around that 2.6.18 it might have been broken in favor of NICAM-DK. The module names even did changed a lot, can't even tell the right debug options off hand any more. With saa7134 audio_debug=1 you should at least see, if it fails to detect NICAM-BG and hangs on other audio. > The steps I follow are > > 1) Remove the modules loaded by default with wrong parameters: rmmod > saa7143-alsa;rmmod saa7134 > 2) sudo modprobe saa7134 card=X (I've tried several values of X) > 3) Run scantv -c /dev/video0 -C /dev/vbi0 (norm = 5 , region=5) > 4) open alsamixer in the SAAXXXX device and set the volume to 100% for > every control > 5) Run > sox -c 2 -t ossdsp /dev/dsp1 -t ossdsp /dev/dsp& ; mencoder -tv > norm=PAL-BG:driver=v4l2:device=/dev/video0:forceaudio:forcechan=1:adev > ice=/dev/dsp:fps=25:chanlist=europe-west:audiorate=32000:width=320:hei > ght=240 -vf lavcdeint -ovc lavc -lavcopts vcodec=mpeg4:vbitrate=225 > -oac lavc -lavcopts abitrate=32 -o out.avi tv://23 Start simple, say xawtv/tvtime and sox -c 2 -s -w -r 32000 -t ossdsp /dev/dsp1 -t ossdsp -w -r 32000 /dev/dsp > > The results I obtain are as follows > > When using any of the values 2,3,39,54,74, 84,82,94 for the card > number when loading the module, scantv does not detect any channel > > When using any of the values 55,60,81,109 for the card: scantv finds channels and I get an image (perfect image with 109, there are some glitches with other values) but only very short pulses of distorted sound. I have also tried using the parameter audio_clock_override=0x00187de7 when loading the module with the different card values, but the result is the same. > > I have also tried using the tuner= parameter when loading the module > but this seems to be ignored, since the dmesg always seems to be > loading tuner=54 > > tuner' 0-004b: chip found @ 0x96 (saa7133[0]) > tda829x 0-004b: setting tuner address to 61 > tda829x 0-004b: type set to tda8290+75a Paul later reported that it works for the Philips Tiger S card=109 and it has for sure a LNA config type 2. That explained the better image at that time already with clear symptoms of missing LNA support previously. > > Sorry for the long mail but I wanted to provide as much info as > possible. I have now spent many nights trying to make this work and I > am in the point in which I don't know what else to do. I would really > appreciate to have some hint on what I am doing wrong, It is difficult on 2.6.18. You must upgrade to current mercurial v4l-dvb. Currently it does not even compile on a 2.6.30. CC [M] /mercurial/hg-head/v4l-dvb/v4l/videobuf-dma-sg.o CC [M] /mercurial/hg-head/v4l-dvb/v4l/videobuf-dma-contig.o /mercurial/hg-head/v4l-dvb/v4l/videobuf-dma-contig.c: In function 'videobuf_dma_contig_user_get': /mercurial/hg-head/v4l-dvb/v4l/videobuf-dma-contig.c:164: error: implicit declaration of function 'follow_pfn' make[3]: *** [/mercurial/hg-head/v4l-dvb/v4l/videobuf-dma-contig.o] Error 1 Anyway, attached is a testing patch, which if applied to something working earlier or fixed later, might give you some direction. Since I don't know, if gpio settings for RF antenna input switch are correct for card=60 and/or 109 that time, in case you get no picture anymore on card=109 with it on recent, change TV gpio in saa7134-cards.c to 0x0000000 and antenna_switch in saa7134-dvb.c to 1 in that case. Cheers, Hermann > Thanks in advance, > > Gabriel > > BTW: this is the dmesg and lspci output #sudo lspci -v 00:0e.0 > Multimedia controller: Philips Semiconductors SAA7131/SAA7133/SAA7135 Video Broadcast Decoder (rev d1) > Subsystem: Device 4e42:4307 > Flags: bus master, medium devsel, latency 84, IRQ 10 > Memory at efffe000 (32-bit, non-prefetchable) [size=2K] > Capabilities: [40] Power Management version 2 > Kernel modules: saa7134 > > > #sudo modprobe saa7134 card=109 > > #dmesg > [ 1821.423064] saa7130/34: v4l2 driver version 0.2.14 loaded [ > 1821.423235] saa7133[0]: found at 0000:00:0e.0, rev: 209, irq: 10, > latency: 84, mmio: 0xefffe000 [ 1821.423269] saa7133[0]: subsystem: > 4e42:4307, board: Philips Tiger - S Reference design [card=109,insmod > option] [ 1821.423452] saa7133[0]: board init: gpio is 200000 [ > 1821.572569] saa7133[0]: i2c eeprom 00: 42 4e 07 43 54 20 1c 00 43 43 > a9 1c 55 d2 b2 92 [ 1821.572636] saa7133[0]: i2c eeprom 10: ff ff ff > 0f ff 20 ff ff ff ff ff ff ff ff ff ff [ 1821.572698] saa7133[0]: i2c > eeprom 20: 01 40 01 02 02 01 01 03 08 ff 00 9d ff ff ff ff [ > 1821.572759] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff > ff ff ff ff ff ff [ 1821.572821] saa7133[0]: i2c eeprom 40: ff 21 00 > c2 96 10 03 22 15 50 ff ff ff ff ff ff [ 1821.572883] saa7133[0]: i2c > eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ > 1821.572945] saa7133[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff > ff ff ff ff ff ff [ 1821.573007] saa7133[0]: i2c eeprom 70: ff ff ff > ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1821.573070] saa7133[0]: i2c > eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ > 1821.573132] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff > ff ff ff ff ff ff [ 1821.573194] saa7133[0]: i2c eeprom a0: ff ff ff > ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1821.573256] saa7133[0]: i2c > eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ > 1821.573318] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff > ff ff ff ff ff ff [ 1821.573381] saa7133[0]: i2c eeprom d0: ff ff ff > ff ff ff ff ff ff ff ff ff ff ff ff ff [ 1821.573443] saa7133[0]: i2c > eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ > 1821.573505] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff > ff ff ff ff ff ff [ 1821.657407] tuner' 0-004b: chip found @ 0x96 > (saa7133[0]) [ 1821.740582] tda829x 0-004b: setting tuner address to > 61 [ 1821.804588] tda829x 0-004b: type set to tda8290+75a [ > 1825.693389] saa7133[0]: registered device video0 [v4l2] [ > 1825.693525] saa7133[0]: registered device vbi0 [ 1825.693659] saa7133[0]: registered device radio0 [ 1825.867650] saa7134 ALSA driver for DMA sound loaded [ 1825.883426] dvb_init() allocating 1 frontend [ 1825.884457] saa7133[0]/alsa: saa7133[0] at 0xefffe000 irq 10 registered as card -2 [ 1825.945980] DVB: registering new adapter (saa7133[0]) [ 1825.946008] DVB: registering adapter 0 frontend 0 (Philips TDA10046H DVB-T)... > [ 1826.168955] tda1004x: setting up plls for 48MHz sampling clock [ > 1828.165008] tda1004x: found firmware revision 29 -- ok > ��.n��������+%������w��{.n�����{��g����^n�r������&��z�ޗ�zf���h���~����������_��+v���)ߣ�m
