Claes Lindblom wrote:
Hi all,
I have just installed my new Nova S2 HD card on ubuntu x86_64,
2.6.28-13-generic, changed the
firmware to version 1.23.86.1 and I have also tried version 1.22.82.0.
The result is that I can tune and watch
channels without any problems but when I try to scan for channels it
will not work.
The card is loaded as adapter 1 so I use the following command to scan
with the latest scan-s2
sudo ./scan-s2 -a 1 -s 0 -l UNIVERSAL dvb-s/Thor-1.0W
I have made a strange discovery about this. scan-s2 does not work but
when I used scan it worked
and after that I started a new scan-s2 which suddenly worked. A while
later I tried again but it did not work so
I had to use scan first and then scan-s2.
I think this is really strange when I have succeded with scan-s2 on my
other card.
Another that appeared with this is that Mythtv 0.22 cannot present any
info on the frontend when installing new cards.
I know that it migt belong in this mailinglist but it feels like it's
connected somehow.
I have a DisEqC switch but I know it's working since I have a
Azurewave AD SP400 card that I have scanned channels before
and also the card can tune in on both LNB's with szap-s2.
Has anyone ideas about the scanning problems?
Dmesg does not output anything.
Output of scan-s2:
----------------------------------> Using DVB-S
>>> tune to: 11216:vC78S0:S0.0W:24500:
DVB-S IF freq is 1466000
WARNING: >>> tuning failed!!!
>>> tune to: 11216:vC78S0:S0.0W:24500: (tuning failed)
DVB-S IF freq is 1466000
WARNING: >>> tuning failed!!!
----------------------------------> Using DVB-S2
>>> tune to: 11216:vC78S1:S0.0W:24500:
DVB-S IF freq is 1466000
WARNING: >>> tuning failed!!!
>>> tune to: 11216:vC78S1:S0.0W:24500: (tuning failed)
DVB-S IF freq is 1466000
WARNING: >>> tuning failed!!!
Regards
/Claes
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
