On Fri, Jul 01, 2016 at 05:33:42PM +0900, Andi Shyti wrote: > The ir-spi is a simple device driver which supports the > connection between an IR LED and the MOSI line of an SPI device. > > The driver, indeed, uses the SPI framework to stream the raw data > provided by userspace through a character device. The chardev is > handled by the LIRC framework and its functionality basically > provides: > > - raw write: data to be sent to the SPI and then streamed to the > MOSI line; > - set frequency: sets the frequency whith which the data should > be sent; > - set length: sets the data length. This information is > optional, if the length is set, then userspace should send raw > data only with that length; while if the length is set to '0', > then the driver will figure out himself the length of the data > based on the length of the data written on the character > device. > The latter is not recommended, though, as the driver, at > any write, allocates and deallocates a buffer where the data > from userspace are stored. > > The driver provides three feedback commands: > > - get length: reads the length set and (as mentioned), if the > length is '0' it will be calculated at any write > - get frequency: the driver reports the frequency. If userpace > doesn't set the frequency, the driver will use a default value > of 38000Hz. This interface is not compatible with other lirc devices; there is no way of determining whether this is a regular lirc device or this new flavour you've invented. Also I don't see what justifies this new interface. This can be implemented in rc-core in less lines of code and it will be entirely compatible with existing user-space. Sean -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
