The header file has some private static structures that are used only by the C file. Move those structures to the C file, in order to shut up gcc 6.1 warnings. Signed-off-by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxxxxx> --- drivers/media/usb/gspca/m5602/m5602_po1030.c | 104 +++++++++++++++++++++++++++ drivers/media/usb/gspca/m5602/m5602_po1030.h | 104 --------------------------- 2 files changed, 104 insertions(+), 104 deletions(-) diff --git a/drivers/media/usb/gspca/m5602/m5602_po1030.c b/drivers/media/usb/gspca/m5602/m5602_po1030.c index 4bf5c43424b7..a0a90dd34ca8 100644 --- a/drivers/media/usb/gspca/m5602/m5602_po1030.c +++ b/drivers/media/usb/gspca/m5602/m5602_po1030.c @@ -23,6 +23,110 @@ static int po1030_s_ctrl(struct v4l2_ctrl *ctrl); static void po1030_dump_registers(struct sd *sd); +static const unsigned char preinit_po1030[][3] = { + {BRIDGE, M5602_XB_MCU_CLK_DIV, 0x02}, + {BRIDGE, M5602_XB_MCU_CLK_CTRL, 0xb0}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0}, + {BRIDGE, M5602_XB_SENSOR_CTRL, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x0c}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0}, + {BRIDGE, M5602_XB_GPIO_DIR, 0x05}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x04}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x06}, + {BRIDGE, M5602_XB_GPIO_DIR_H, 0x06}, + {BRIDGE, M5602_XB_GPIO_DAT_H, 0x02}, + + {SENSOR, PO1030_AUTOCTRL2, PO1030_SENSOR_RESET | (1 << 2)}, + + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x04}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x0c}, + {BRIDGE, M5602_XB_GPIO_DIR, 0x05}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x00} +}; + +static const unsigned char init_po1030[][3] = { + {BRIDGE, M5602_XB_MCU_CLK_DIV, 0x02}, + {BRIDGE, M5602_XB_MCU_CLK_CTRL, 0xb0}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0}, + {BRIDGE, M5602_XB_ADC_CTRL, 0xc0}, + {BRIDGE, M5602_XB_SENSOR_CTRL, 0x00}, + {BRIDGE, M5602_XB_SENSOR_TYPE, 0x0c}, + + {SENSOR, PO1030_AUTOCTRL2, PO1030_SENSOR_RESET | (1 << 2)}, + + {BRIDGE, M5602_XB_GPIO_DIR, 0x05}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x04}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x06}, + {BRIDGE, M5602_XB_GPIO_EN_L, 0x00}, + {BRIDGE, M5602_XB_GPIO_DIR_H, 0x06}, + {BRIDGE, M5602_XB_GPIO_DAT_H, 0x02}, + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x04}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0}, + {BRIDGE, M5602_XB_GPIO_DIR, 0x05}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x00}, + + {SENSOR, PO1030_AUTOCTRL2, 0x04}, + + {SENSOR, PO1030_OUTFORMCTRL2, PO1030_RAW_RGB_BAYER}, + {SENSOR, PO1030_AUTOCTRL1, PO1030_WEIGHT_WIN_2X}, + + {SENSOR, PO1030_CONTROL2, 0x03}, + {SENSOR, 0x21, 0x90}, + {SENSOR, PO1030_YTARGET, 0x60}, + {SENSOR, 0x59, 0x13}, + {SENSOR, PO1030_OUTFORMCTRL1, PO1030_HREF_ENABLE}, + {SENSOR, PO1030_EDGE_ENH_OFF, 0x00}, + {SENSOR, PO1030_EGA, 0x80}, + {SENSOR, 0x78, 0x14}, + {SENSOR, 0x6f, 0x01}, + {SENSOR, PO1030_GLOBALGAINMAX, 0x14}, + {SENSOR, PO1030_Cb_U_GAIN, 0x38}, + {SENSOR, PO1030_Cr_V_GAIN, 0x38}, + {SENSOR, PO1030_CONTROL1, PO1030_SHUTTER_MODE | + PO1030_AUTO_SUBSAMPLING | + PO1030_FRAME_EQUAL}, + {SENSOR, PO1030_GC0, 0x10}, + {SENSOR, PO1030_GC1, 0x20}, + {SENSOR, PO1030_GC2, 0x40}, + {SENSOR, PO1030_GC3, 0x60}, + {SENSOR, PO1030_GC4, 0x80}, + {SENSOR, PO1030_GC5, 0xa0}, + {SENSOR, PO1030_GC6, 0xc0}, + {SENSOR, PO1030_GC7, 0xff}, + + /* Set the width to 751 */ + {SENSOR, PO1030_FRAMEWIDTH_H, 0x02}, + {SENSOR, PO1030_FRAMEWIDTH_L, 0xef}, + + /* Set the height to 540 */ + {SENSOR, PO1030_FRAMEHEIGHT_H, 0x02}, + {SENSOR, PO1030_FRAMEHEIGHT_L, 0x1c}, + + /* Set the x window to 1 */ + {SENSOR, PO1030_WINDOWX_H, 0x00}, + {SENSOR, PO1030_WINDOWX_L, 0x01}, + + /* Set the y window to 1 */ + {SENSOR, PO1030_WINDOWY_H, 0x00}, + {SENSOR, PO1030_WINDOWY_L, 0x01}, + + /* with a very low lighted environment increase the exposure but + * decrease the FPS (Frame Per Second) */ + {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00}, + {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0}, + + {BRIDGE, M5602_XB_GPIO_DIR, 0x05}, + {BRIDGE, M5602_XB_GPIO_DAT, 0x00}, + {BRIDGE, M5602_XB_GPIO_EN_H, 0x06}, + {BRIDGE, M5602_XB_GPIO_EN_L, 0x00}, +}; + static struct v4l2_pix_format po1030_modes[] = { { 640, diff --git a/drivers/media/usb/gspca/m5602/m5602_po1030.h b/drivers/media/usb/gspca/m5602/m5602_po1030.h index a6ab76149bd0..981a91aa7450 100644 --- a/drivers/media/usb/gspca/m5602/m5602_po1030.h +++ b/drivers/media/usb/gspca/m5602/m5602_po1030.h @@ -167,108 +167,4 @@ static const struct m5602_sensor po1030 = { .start = po1030_start, .disconnect = po1030_disconnect, }; - -static const unsigned char preinit_po1030[][3] = { - {BRIDGE, M5602_XB_MCU_CLK_DIV, 0x02}, - {BRIDGE, M5602_XB_MCU_CLK_CTRL, 0xb0}, - {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00}, - {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0}, - {BRIDGE, M5602_XB_ADC_CTRL, 0xc0}, - {BRIDGE, M5602_XB_SENSOR_CTRL, 0x00}, - {BRIDGE, M5602_XB_SENSOR_TYPE, 0x0c}, - {BRIDGE, M5602_XB_ADC_CTRL, 0xc0}, - {BRIDGE, M5602_XB_GPIO_DIR, 0x05}, - {BRIDGE, M5602_XB_GPIO_DAT, 0x04}, - {BRIDGE, M5602_XB_GPIO_EN_H, 0x06}, - {BRIDGE, M5602_XB_GPIO_DIR_H, 0x06}, - {BRIDGE, M5602_XB_GPIO_DAT_H, 0x02}, - - {SENSOR, PO1030_AUTOCTRL2, PO1030_SENSOR_RESET | (1 << 2)}, - - {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x04}, - {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0}, - {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00}, - {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0}, - {BRIDGE, M5602_XB_SENSOR_TYPE, 0x0c}, - {BRIDGE, M5602_XB_GPIO_DIR, 0x05}, - {BRIDGE, M5602_XB_GPIO_DAT, 0x00} -}; - -static const unsigned char init_po1030[][3] = { - {BRIDGE, M5602_XB_MCU_CLK_DIV, 0x02}, - {BRIDGE, M5602_XB_MCU_CLK_CTRL, 0xb0}, - {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00}, - {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0}, - {BRIDGE, M5602_XB_ADC_CTRL, 0xc0}, - {BRIDGE, M5602_XB_SENSOR_CTRL, 0x00}, - {BRIDGE, M5602_XB_SENSOR_TYPE, 0x0c}, - - {SENSOR, PO1030_AUTOCTRL2, PO1030_SENSOR_RESET | (1 << 2)}, - - {BRIDGE, M5602_XB_GPIO_DIR, 0x05}, - {BRIDGE, M5602_XB_GPIO_DAT, 0x04}, - {BRIDGE, M5602_XB_GPIO_EN_H, 0x06}, - {BRIDGE, M5602_XB_GPIO_EN_L, 0x00}, - {BRIDGE, M5602_XB_GPIO_DIR_H, 0x06}, - {BRIDGE, M5602_XB_GPIO_DAT_H, 0x02}, - {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x04}, - {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0}, - {BRIDGE, M5602_XB_GPIO_DIR, 0x05}, - {BRIDGE, M5602_XB_GPIO_DAT, 0x00}, - - {SENSOR, PO1030_AUTOCTRL2, 0x04}, - - {SENSOR, PO1030_OUTFORMCTRL2, PO1030_RAW_RGB_BAYER}, - {SENSOR, PO1030_AUTOCTRL1, PO1030_WEIGHT_WIN_2X}, - - {SENSOR, PO1030_CONTROL2, 0x03}, - {SENSOR, 0x21, 0x90}, - {SENSOR, PO1030_YTARGET, 0x60}, - {SENSOR, 0x59, 0x13}, - {SENSOR, PO1030_OUTFORMCTRL1, PO1030_HREF_ENABLE}, - {SENSOR, PO1030_EDGE_ENH_OFF, 0x00}, - {SENSOR, PO1030_EGA, 0x80}, - {SENSOR, 0x78, 0x14}, - {SENSOR, 0x6f, 0x01}, - {SENSOR, PO1030_GLOBALGAINMAX, 0x14}, - {SENSOR, PO1030_Cb_U_GAIN, 0x38}, - {SENSOR, PO1030_Cr_V_GAIN, 0x38}, - {SENSOR, PO1030_CONTROL1, PO1030_SHUTTER_MODE | - PO1030_AUTO_SUBSAMPLING | - PO1030_FRAME_EQUAL}, - {SENSOR, PO1030_GC0, 0x10}, - {SENSOR, PO1030_GC1, 0x20}, - {SENSOR, PO1030_GC2, 0x40}, - {SENSOR, PO1030_GC3, 0x60}, - {SENSOR, PO1030_GC4, 0x80}, - {SENSOR, PO1030_GC5, 0xa0}, - {SENSOR, PO1030_GC6, 0xc0}, - {SENSOR, PO1030_GC7, 0xff}, - - /* Set the width to 751 */ - {SENSOR, PO1030_FRAMEWIDTH_H, 0x02}, - {SENSOR, PO1030_FRAMEWIDTH_L, 0xef}, - - /* Set the height to 540 */ - {SENSOR, PO1030_FRAMEHEIGHT_H, 0x02}, - {SENSOR, PO1030_FRAMEHEIGHT_L, 0x1c}, - - /* Set the x window to 1 */ - {SENSOR, PO1030_WINDOWX_H, 0x00}, - {SENSOR, PO1030_WINDOWX_L, 0x01}, - - /* Set the y window to 1 */ - {SENSOR, PO1030_WINDOWY_H, 0x00}, - {SENSOR, PO1030_WINDOWY_L, 0x01}, - - /* with a very low lighted environment increase the exposure but - * decrease the FPS (Frame Per Second) */ - {BRIDGE, M5602_XB_SEN_CLK_DIV, 0x00}, - {BRIDGE, M5602_XB_SEN_CLK_CTRL, 0xb0}, - - {BRIDGE, M5602_XB_GPIO_DIR, 0x05}, - {BRIDGE, M5602_XB_GPIO_DAT, 0x00}, - {BRIDGE, M5602_XB_GPIO_EN_H, 0x06}, - {BRIDGE, M5602_XB_GPIO_EN_L, 0x00}, -}; #endif -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html