On Tue, Jun 14, 2016 at 11:31 PM, Sakari Ailus <sakari.ailus@xxxxxx> wrote: > Hi Rob, > > On Tue, Jun 14, 2016 at 05:05:17PM -0500, Rob Herring wrote: >> On Sat, Jun 11, 2016 at 06:39:53PM +0300, Ivaylo Dimitrov wrote: >> > Add DT bindings description >> >> Not exactly the best commit msg. >> >> > >> > Signed-off-by: Ivaylo Dimitrov <ivo.g.dimitrov.75@xxxxxxxxx> >> > --- >> > .../bindings/media/i2c/toshiba,et8ek8.txt | 50 ++++++++++++++++++++++ >> > 1 file changed, 50 insertions(+) >> > create mode 100644 Documentation/devicetree/bindings/media/i2c/toshiba,et8ek8.txt >> > >> > diff --git a/Documentation/devicetree/bindings/media/i2c/toshiba,et8ek8.txt b/Documentation/devicetree/bindings/media/i2c/toshiba,et8ek8.txt >> > new file mode 100644 >> > index 0000000..997d268 >> > --- /dev/null >> > +++ b/Documentation/devicetree/bindings/media/i2c/toshiba,et8ek8.txt >> > @@ -0,0 +1,50 @@ >> > +Toshiba et8ek8 5MP sensor >> > + >> > +Toshiba et8ek8 5MP sensor is an image sensor found in Nokia N900 device >> > + >> > +More detailed documentation can be found in >> > +Documentation/devicetree/bindings/media/video-interfaces.txt . >> > + >> > + >> > +Mandatory properties >> > +-------------------- >> > + >> > +- compatible: "toshiba,et8ek8" >> > +- reg: I2C address (0x3e, or an alternative address) >> > +- vana-supply: Analogue voltage supply (VANA), 2.8 volts >> >> > +- clocks: External clock to the sensor >> > +- clock-frequency: Frequency of the external clock to the sensor >> >> These should be mutually-exclusive. If you have a clock, then you can >> get the frequency at runtime. > > Yes, you can. But the intention is to set the frequency: the sensor requires > a particular, pre-determined frequency. Typically this is specific to the > board. Okay, then state that in the description. Rob -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
