Hi,
Tuning a card with Sony ASCOT2E produces the following error:
kernel: i2c i2c-9: wr reg=0006: len=11 is too big!
MAX_WRITE_REGSIZE is defined as 10, buf[MAX_WRITE_REGSIZE + 1] buffer is
used in ascot2e_write_regs().
The problem is that exactly 10 bytes are written in ascot2e_set_params():
/* Set BW_OFFSET (0x0F) value from parameter table */
data[9] = ascot2e_sett[tv_system].bw_offset;
ascot2e_write_regs(priv, 0x06, data, 10);
The test in write_regs is as follows:
if (len + 1 >= sizeof(buf))
10 + 1 = 11 and that would be exactly the size of buf. Since 10 bytes +
buf[0] = reg would seem to fit into buf[], this shouldn't be an error.
The following patch fixes the problem for me, I have tested the card and it
seems to be working fine.
---
drivers/media/dvb-frontends/ascot2e.c | 2 +-
1 files changed, 1 insertions(+), 1 deletions(-)
diff --git a/drivers/media/dvb-frontends/ascot2e.c
b/drivers/media/dvb-frontends/ascot2e.c
--- a/drivers/media/dvb-frontends/ascot2e.c
+++ b/drivers/media/dvb-frontends/ascot2e.c
@@ -132,7 +132,7 @@ static int ascot2e_write_regs(struct ascot2e_priv *priv,
}
};
- if (len + 1 >= sizeof(buf)) {
+ if (len + 1 > sizeof(buf)) {
dev_warn(&priv->i2c->dev,"wr reg=%04x: len=%d is too
big!\n",
reg, len + 1);
return -E2BIG;
Regards,
Saso Slavicic
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
