On 05/24/2016 11:13 AM, Dragos Bogdan wrote: > The part can be reset by a low pulse on the RESET pin (i.e. a hardware reset) with a minimum width of 5 ms. It is recommended to wait 5 ms after the low pulse before an I2C write is performed to the part. > For safety reasons, the delays will be 10 ms. > The RESET pin can be tied high, so the GPIO is optional. > > Signed-off-by: Dragos Bogdan <dragos.bogdan@xxxxxxxxxx> Patch looks OK. One comment about the commit message, usually this should be line-wrapped at around 75 characters. Reviewed-by: Lars-Peter Clausen <lars@xxxxxxxxxx> Thanks. -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
