This adds the missing auto-select bits for DVB-frontends and tuners (if MEDIA_SUBDRV_AUTOSELECT is enabled) which are used by the various rtl28xxu devices. The driver itself probes for three more tuners, but it's not actually using any of them: - MEDIA_TUNER_MT2063 - MEDIA_TUNER_MT2266 - MEDIA_TUNER_MXL5007T Signed-off-by: Martin Blumenstingl <martin.blumenstingl@xxxxxxxxxxxxxx> --- drivers/media/usb/dvb-usb-v2/Kconfig | 5 +++++ 1 file changed, 5 insertions(+) diff --git a/drivers/media/usb/dvb-usb-v2/Kconfig b/drivers/media/usb/dvb-usb-v2/Kconfig index 3dc8ef0..fcecbf7 100644 --- a/drivers/media/usb/dvb-usb-v2/Kconfig +++ b/drivers/media/usb/dvb-usb-v2/Kconfig @@ -127,9 +127,12 @@ config DVB_USB_MXL111SF config DVB_USB_RTL28XXU tristate "Realtek RTL28xxU DVB USB support" depends on DVB_USB_V2 && I2C_MUX + select DVB_MN88472 if MEDIA_SUBDRV_AUTOSELECT + select DVB_MN88473 if MEDIA_SUBDRV_AUTOSELECT select DVB_RTL2830 select DVB_RTL2832 select DVB_RTL2832_SDR if (MEDIA_SUBDRV_AUTOSELECT && MEDIA_SDR_SUPPORT) + select DVB_SI2168 if MEDIA_SUBDRV_AUTOSELECT select MEDIA_TUNER_QT1010 if MEDIA_SUBDRV_AUTOSELECT select MEDIA_TUNER_MT2060 if MEDIA_SUBDRV_AUTOSELECT select MEDIA_TUNER_MXL5005S if MEDIA_SUBDRV_AUTOSELECT @@ -138,6 +141,8 @@ config DVB_USB_RTL28XXU select MEDIA_TUNER_E4000 if MEDIA_SUBDRV_AUTOSELECT select MEDIA_TUNER_FC2580 if MEDIA_SUBDRV_AUTOSELECT select MEDIA_TUNER_R820T if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_SI2157 if MEDIA_SUBDRV_AUTOSELECT + select MEDIA_TUNER_TUA9001 if MEDIA_SUBDRV_AUTOSELECT help Say Y here to support the Realtek RTL28xxU DVB USB receiver. -- 2.8.2 -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
