Dear Antti, I apologize for tackling this old problem, but I just ran into the same situation with my "DVBSky T330 DVB-C" and found that I'm not the only one. Antti Palosaari <crope iki.fi> writes: > > Moikka! > > On 11/19/2015 01:36 AM, Stephan Eisvogel wrote: > > Hey Olli, Antti, > > > culprit is: > > > > http://git.linuxtv.org/cgit.cgi/linux.git/commit/drivers/media/dvb-frontends/si2168.c?id=7adf99d20ce0e96a70755f452e3a63824b14060f Reverting this commit helps, but is not very convenient. > To see that, debug messages should be enabled: > modprobe si2168 dyndbg==pmftl > or > modprobe si2168; echo -n 'module si2168 =pft' > > /sys/kernel/debug/dynamic_debug/control > > You could also replace all dev_dbg with dev_info if you don't care > compile kernel with dynamic debugs enabled needed for normal debug logging. > Dynamic debug didn't work properly on my system. I'll replace all dev_dbg with dev_info and provide you the output as soon as possible, if you are still interested. > Also, you used 4.0.19 firmware. Could you test that old one: > http://palosaari.fi/linux/v4l-dvb/firmware/Si2168/Si2168-B40/4.0.11/ > I've just tried the old 4.0.11 firmware - and the error is gone. Now the tuning works perfectly! Best regards, Rolf -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
