From: Hans Verkuil <hverkuil@xxxxxxxxx> Add support in the dts for the HDMI input. Based on the Lager dts patch from Ultich Hecht. Signed-off-by: Hans Verkuil <hans.verkuil@xxxxxxxxx> [uli: removed "renesas," prefixes from pfc nodes] Signed-off-by: Ulrich Hecht <ulrich.hecht+renesas@xxxxxxxxx> --- arch/arm/boot/dts/r8a7791-koelsch.dts | 41 +++++++++++++++++++++++++++++++++++ 1 file changed, 41 insertions(+) diff --git a/arch/arm/boot/dts/r8a7791-koelsch.dts b/arch/arm/boot/dts/r8a7791-koelsch.dts index da59c28..a96e3fa 100644 --- a/arch/arm/boot/dts/r8a7791-koelsch.dts +++ b/arch/arm/boot/dts/r8a7791-koelsch.dts @@ -393,6 +393,11 @@ function = "usb1"; }; + vin0_pins: vin0 { + groups = "vin0_data24", "vin0_sync", "vin0_clkenb", "vin0_clk"; + function = "vin0"; + }; + vin1_pins: vin1 { groups = "vin1_data8", "vin1_clk"; function = "vin1"; @@ -551,6 +556,21 @@ reg = <0x12>; }; + hdmi-in@4c { + compatible = "adi,adv7612"; + reg = <0x4c>; + interrupt-parent = <&gpio1>; + interrupts = <20 IRQ_TYPE_LEVEL_LOW>; + remote = <&vin0>; + default-input = <0>; + + port { + adv7612: endpoint { + remote-endpoint = <&vin0ep>; + }; + }; + }; + composite-in@20 { compatible = "adi,adv7180"; reg = <0x20>; @@ -672,6 +692,27 @@ cpu0-supply = <&vdd_dvfs>; }; +/* HDMI video input */ +&vin0 { + status = "okay"; + pinctrl-0 = <&vin0_pins>; + pinctrl-names = "default"; + + port { + #address-cells = <1>; + #size-cells = <0>; + + vin0ep: endpoint { + remote-endpoint = <&adv7612>; + bus-width = <24>; + hsync-active = <0>; + vsync-active = <0>; + pclk-sample = <1>; + data-active = <1>; + }; + }; +}; + /* composite video input */ &vin1 { status = "okay"; -- 2.7.4 -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html