On 09/11/2009 07:30 PM, Matthew Skinner, PC Mus wrote:
I have the Leadtek WinFast DTV Dongle Gold which uses the af9015 chip and
the y04g0051 remote, after a lot of reading I now have the remote partially
working as only half of the keys are sending codes to "irw"
I read this thread and noticed that the exact keys which work are the ones
listed with reported codes.
http://www.linuxtv.org/pipermail/linux-dvb/2008-July/027058.html
The keys not mentioned in that thread are the ones not working, so I guess
the extra codes need to be reported to someone to be added into a new build?
Can I help in providing these codes and some testing.
You could send missing button codes to me and I will add those to the
driver. There is debug switch which shows remote events, it is debug=2.
remove driver from memory
# rmmod dvb-usb-af9015
# load driver with needed debug
modprobe dvb-usb-af9015 debug=2
# look codes from log
tail -f /var/log/messages
I am not sure if debugs are enabled with your system build, but if not
you will need to install and compile current v4l-dvb master.
Antti
--
http://palosaari.fi/
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
