Re: LinuxTV firmware blocks all wireless connections / traffic

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



On 09/10/2009 10:39 PM, Aleksandr V. Piskunov wrote:
On Thu, Sep 10, 2009 at 08:16:31PM +0300, Aleksandr V. Piskunov wrote:
On Thu, Sep 10, 2009 at 05:48:22PM +0300, Antti Palosaari wrote:
Here it is, USB2.0 URB is now about 16k both af9015 and ce6230 devices.
Now powertop shows only about 220 wakeups on my computer for the both
sticks.
Please test and tell what powertop says:
http://linuxtv.org/hg/~anttip/urb_size/

I wonder if we can decide what URB size DVB USB drivers should follow
and even add new module param for overriding driver default.

Thanks, Antti!

Tested your branch on affected system.

Load definitely went down, from ~7000 wakeups to ~250 for each tuner
according to powertop.
Both tuners still working ok if not used simultaneously or if used the
same time on different USB controllers.

Bad news are that original problem still persists: putting both tuners
on same USB controller and zapping simultaneously corrupts stream.
Interesting observation: no matter in what sequence tuners are connected
(i.e. become adapter0 or adapter1), af9015 stream always gets heavily
distorted, visually mplayer picture becomes like 80% corrupted with
random color blocks and pixels, sound becomes a mess. At the same time
ce6230 gets slight corruption, a few discolored blocks at the time and
sound hickups.

Anyway, will try to do a few more tests:
1) Two usb flash drives on same controller calculating md5sum of
big .iso file, to check if it is/isn't dvb-usb problem.
2) Will see if same issue persists on another PC with same motherboard
(slightly different revision) to rule out hardware issues. If I manage
to wire antenna there, that is...

Ok, two USB flash drives on same controller, no problem when bulk reading
from both at the same time, no speed drops, no corruption.

Now if I plug ce6230 tuner, zap to channel and then start reading from
flash drive:
* slightly corrupted TS stream
* flash drive read getting starved on bandwidth, speed drops from 10 MB/s
   to ~7 MB/s

If I plug af9015 tuner, zap and read from flash
* heavy corruption of TS stream
* flash drive read speed drops from 10 MB/s to 2(!) MB/s

Now I don't really know the USB protocol under-the-hood details, all the
different types of bandwidth, reservation and so on. But shouldn't one
480 Mbit/sec controller handle rather large number of digital tuners, each
pushing 20-25 Mbit/sec max, even considering all the overhead?

I have no any problems here, ce6230 and af9015 with dual tuners (3x DVB-T 22Mbit/sec TS streams) running same time on same bus.

One possibility is that there is RF-noise looping from device to device disturbing USB transfer or RF-signal. I have seen such situation when I connect multiple DVB-C devices to same antenna cable using cheap splitter.

Anyhow, I increased URB sizes to 65k. Now ce6230 gives 70 wakeups and af9015 120 wakeups - due to remote polling. You can test if you wish, but results are most likely same as earlier. I cannot do much more.
http://linuxtv.org/hg/~anttip/urb_size/

Antti
--
http://palosaari.fi/
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux