2009/9/5 Morvan Le Meut <mlemeut@xxxxxxxxx>: > ( new subject from my previous ec168 mail ) > > got the firmware from http://steventoth.net/linux/hvr1200/ > > using the latest code from linuxtv ( which autodetect the card as an HVR1120 ) > seems the problem is firmware uploading ... wrong file ? > on the card PCB i got : > 670000-038 LF > the DVB part read > hauppauge 1110 > dvb-t > 67209 LF rev c2F5 > and the chip read Saa7131e/03/G > for those who may need it, here's a full dmesg output and i forgot to say that this was on a mythbuntu 9.04 ( the other tv card is an ADS-tech instant tv dvb-t PCI ) : [ 0.000000] BIOS EBDA/lowmem at: 0009f000/0009f000 [ 0.000000] Initializing cgroup subsys cpuset [ 0.000000] Initializing cgroup subsys cpu [ 0.000000] Linux version 2.6.28-11-generic (buildd@palmer) (gcc version 4.3.3 (Ubuntu 4.3.3-5ubuntu4) ) #42-Ubuntu SMP Fri Apr 17 01:57:59 UTC 2009 (Ubuntu 2.6.28-11.42-generic) [ 0.000000] KERNEL supported cpus: [ 0.000000] Intel GenuineIntel [ 0.000000] AMD AuthenticAMD [ 0.000000] NSC Geode by NSC [ 0.000000] Cyrix CyrixInstead [ 0.000000] Centaur CentaurHauls [ 0.000000] Transmeta GenuineTMx86 [ 0.000000] Transmeta TransmetaCPU [ 0.000000] UMC UMC UMC UMC [ 0.000000] BIOS-provided physical RAM map: [ 0.000000] BIOS-e820: 0000000000000000 - 000000000009f000 (usable) [ 0.000000] BIOS-e820: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] BIOS-e820: 00000000000e6000 - 0000000000100000 (reserved) [ 0.000000] BIOS-e820: 0000000000100000 - 000000003ffc0000 (usable) [ 0.000000] BIOS-e820: 000000003ffc0000 - 000000003ffce000 (ACPI data) [ 0.000000] BIOS-e820: 000000003ffce000 - 000000003fff0000 (ACPI NVS) [ 0.000000] BIOS-e820: 000000003fff0000 - 000000003fffe000 (reserved) [ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fef00000 (reserved) [ 0.000000] BIOS-e820: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] DMI present. [ 0.000000] AMI BIOS detected: BIOS may corrupt low RAM, working it around. [ 0.000000] last_pfn = 0x3ffc0 max_arch_pfn = 0x100000 [ 0.000000] Scanning 0 areas for low memory corruption [ 0.000000] modified physical RAM map: [ 0.000000] modified: 0000000000000000 - 0000000000010000 (reserved) [ 0.000000] modified: 0000000000010000 - 000000000009f000 (usable) [ 0.000000] modified: 000000000009f000 - 00000000000a0000 (reserved) [ 0.000000] modified: 00000000000e6000 - 0000000000100000 (reserved) [ 0.000000] modified: 0000000000100000 - 000000003ffc0000 (usable) [ 0.000000] modified: 000000003ffc0000 - 000000003ffce000 (ACPI data) [ 0.000000] modified: 000000003ffce000 - 000000003fff0000 (ACPI NVS) [ 0.000000] modified: 000000003fff0000 - 000000003fffe000 (reserved) [ 0.000000] modified: 00000000fec00000 - 00000000fec01000 (reserved) [ 0.000000] modified: 00000000fee00000 - 00000000fef00000 (reserved) [ 0.000000] modified: 00000000fff00000 - 0000000100000000 (reserved) [ 0.000000] kernel direct mapping tables up to 373fe000 @ 10000-16000 [ 0.000000] RAMDISK: 378b2000 - 37fefe50 [ 0.000000] Allocated new RAMDISK: 00881000 - 00fbee50 [ 0.000000] Move RAMDISK from 00000000378b2000 - 0000000037fefe4f to 00881000 - 00fbee4f [ 0.000000] ACPI: RSDP 000FA1F0, 0014 (r0 ACPIAM) [ 0.000000] ACPI: RSDT 3FFC0000, 0038 (r1 021709 RSDT1317 20090217 MSFT 97) [ 0.000000] ACPI: FACP 3FFC0200, 0084 (r1 021709 FACP1317 20090217 MSFT 97) [ 0.000000] ACPI: DSDT 3FFC04A0, 4880 (r1 1ADKR 1ADKR017 17 INTL 20051117) [ 0.000000] ACPI: FACS 3FFCE000, 0040 [ 0.000000] ACPI: APIC 3FFC0390, 0080 (r1 021709 APIC1317 20090217 MSFT 97) [ 0.000000] ACPI: MCFG 3FFC0410, 003C (r1 021709 OEMMCFG 20090217 MSFT 97) [ 0.000000] ACPI: WDRT 3FFC0450, 0047 (r1 021709 NV-WDRT 20090217 MSFT 97) [ 0.000000] ACPI: OEMB 3FFCE040, 0071 (r1 021709 OEMB1317 20090217 MSFT 97) [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] 139MB HIGHMEM available. [ 0.000000] 883MB LOWMEM available. [ 0.000000] mapped low ram: 0 - 373fe000 [ 0.000000] low ram: 00000000 - 373fe000 [ 0.000000] bootmap 00012000 - 00018e80 [ 0.000000] (9 early reservations) ==> bootmem [0000000000 - 00373fe000] [ 0.000000] #0 [0000000000 - 0000001000] BIOS data page ==> [0000000000 - 0000001000] [ 0.000000] #1 [0000001000 - 0000002000] EX TRAMPOLINE ==> [0000001000 - 0000002000] [ 0.000000] #2 [0000006000 - 0000007000] TRAMPOLINE ==> [0000006000 - 0000007000] [ 0.000000] #3 [0000100000 - 000087c52c] TEXT DATA BSS ==> [0000100000 - 000087c52c] [ 0.000000] #4 [000087d000 - 0000881000] INIT_PG_TABLE ==> [000087d000 - 0000881000] [ 0.000000] #5 [000009f000 - 0000100000] BIOS reserved ==> [000009f000 - 0000100000] [ 0.000000] #6 [0000010000 - 0000012000] PGTABLE ==> [0000010000 - 0000012000] [ 0.000000] #7 [0000881000 - 0000fbee50] NEW RAMDISK ==> [0000881000 - 0000fbee50] [ 0.000000] #8 [0000012000 - 0000019000] BOOTMAP ==> [0000012000 - 0000019000] [ 0.000000] found SMP MP-table at [c00ff780] 000ff780 [ 0.000000] Zone PFN ranges: [ 0.000000] DMA 0x00000010 -> 0x00001000 [ 0.000000] Normal 0x00001000 -> 0x000373fe [ 0.000000] HighMem 0x000373fe -> 0x0003ffc0 [ 0.000000] Movable zone start PFN for each node [ 0.000000] early_node_map[2] active PFN ranges [ 0.000000] 0: 0x00000010 -> 0x0000009f [ 0.000000] 0: 0x00000100 -> 0x0003ffc0 [ 0.000000] On node 0 totalpages: 261967 [ 0.000000] free_area_init_node: node 0, pgdat c06d0f80, node_mem_map c1000200 [ 0.000000] DMA zone: 32 pages used for memmap [ 0.000000] DMA zone: 0 pages reserved [ 0.000000] DMA zone: 3951 pages, LIFO batch:0 [ 0.000000] Normal zone: 1736 pages used for memmap [ 0.000000] Normal zone: 220470 pages, LIFO batch:31 [ 0.000000] HighMem zone: 280 pages used for memmap [ 0.000000] HighMem zone: 35498 pages, LIFO batch:7 [ 0.000000] Movable zone: 0 pages used for memmap [ 0.000000] Nvidia board detected. Ignoring ACPI timer override. [ 0.000000] If you got timer trouble try acpi_use_timer_override [ 0.000000] Detected use of extended apic ids on hypertransport bus [ 0.000000] ACPI: PM-Timer IO Port: 0x4008 [ 0.000000] ACPI: Local APIC address 0xfee00000 [ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x81] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x82] disabled) [ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x83] disabled) [ 0.000000] ACPI: IOAPIC (id[0x01] address[0xfec00000] gsi_base[0]) [ 0.000000] IOAPIC[0]: apic_id 1, version 17, address 0xfec00000, GSI 0-23 [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) [ 0.000000] ACPI: BIOS IRQ0 pin2 override ignored. [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 14 global_irq 14 high edge) [ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 15 global_irq 15 high edge) [ 0.000000] ACPI: IRQ9 used by override. [ 0.000000] ACPI: IRQ14 used by override. [ 0.000000] ACPI: IRQ15 used by override. [ 0.000000] Enabling APIC mode: Flat. Using 1 I/O APICs [ 0.000000] Using ACPI (MADT) for SMP configuration information [ 0.000000] SMP: Allowing 4 CPUs, 3 hotplug CPUs [ 0.000000] PM: Registered nosave memory: 000000000009f000 - 00000000000a0000 [ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e6000 [ 0.000000] PM: Registered nosave memory: 00000000000e6000 - 0000000000100000 [ 0.000000] Allocating PCI resources starting at 40000000 (gap: 3fffe000:bec02000) [ 0.000000] PERCPU: Allocating 45056 bytes of per cpu data [ 0.000000] NR_CPUS: 64, nr_cpu_ids: 4, nr_node_ids 1 [ 0.000000] Built 1 zonelists in Zone order, mobility grouping on. Total pages: 259919 [ 0.000000] Kernel command line: root=UUID=0771bfb9-de6b-48af-9bd7-f531a9fc3753 ro quiet splash [ 0.000000] Enabling fast FPU save and restore... done. [ 0.000000] Enabling unmasked SIMD FPU exception support... done. [ 0.000000] Initializing CPU#0 [ 0.000000] PID hash table entries: 4096 (order: 12, 16384 bytes) [ 0.000000] Fast TSC calibration using PIT [ 0.000000] Detected 2612.353 MHz processor. [ 0.004000] spurious 8259A interrupt: IRQ7. [ 0.004000] Console: colour VGA+ 80x25 [ 0.004000] console [tty0] enabled [ 0.004000] Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) [ 0.004000] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [ 0.004000] allocated 5241280 bytes of page_cgroup [ 0.004000] please try cgroup_disable=memory option if you don't want [ 0.004000] Scanning for low memory corruption every 60 seconds [ 0.004000] Memory: 1018140k/1048320k available (4126k kernel code, 29428k reserved, 2208k data, 532k init, 143112k highmem) [ 0.004000] virtual kernel memory layout: [ 0.004000] fixmap : 0xffc77000 - 0xfffff000 (3616 kB) [ 0.004000] pkmap : 0xff400000 - 0xff800000 (4096 kB) [ 0.004000] vmalloc : 0xf7bfe000 - 0xff3fe000 ( 120 MB) [ 0.004000] lowmem : 0xc0000000 - 0xf73fe000 ( 883 MB) [ 0.004000] .init : 0xc0737000 - 0xc07bc000 ( 532 kB) [ 0.004000] .data : 0xc0507a6f - 0xc072fe60 (2208 kB) [ 0.004000] .text : 0xc0100000 - 0xc0507a6f (4126 kB) [ 0.004000] Checking if this processor honours the WP bit even in supervisor mode...Ok. [ 0.004000] SLUB: Genslabs=12, HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [ 0.004010] Calibrating delay loop (skipped), value calculated using timer frequency.. 5224.70 BogoMIPS (lpj=10449412) [ 0.004025] Security Framework initialized [ 0.004031] SELinux: Disabled at boot. [ 0.004051] AppArmor: AppArmor initialized [ 0.004058] Mount-cache hash table entries: 512 [ 0.004183] Initializing cgroup subsys ns [ 0.004185] Initializing cgroup subsys cpuacct [ 0.004187] Initializing cgroup subsys memory [ 0.004191] Initializing cgroup subsys freezer [ 0.004201] CPU: L1 I Cache: 64K (64 bytes/line), D cache 64K (64 bytes/line) [ 0.004203] CPU: L2 Cache: 512K (64 bytes/line) [ 0.004207] using C1E aware idle routine [ 0.004215] Checking 'hlt' instruction... OK. [ 0.020454] SMP alternatives: switching to UP code [ 0.108021] ACPI: Core revision 20080926 [ 0.109720] ACPI: Checking initramfs for custom DSDT [ 0.337414] ..TIMER: vector=0x30 apic1=0 pin1=0 apic2=-1 pin2=-1 [ 0.377115] CPU0: AMD Athlon(tm) 64 Processor 4000+ stepping 03 [ 0.380001] Brought up 1 CPUs [ 0.380001] Total of 1 processors activated (5224.70 BogoMIPS). [ 0.380001] CPU0 attaching NULL sched-domain. [ 0.380001] net_namespace: 776 bytes [ 0.380001] Booting paravirtualized kernel on bare hardware [ 0.380001] Time: 6:44:43 Date: 09/06/09 [ 0.380001] regulator: core version 0.5 [ 0.380001] NET: Registered protocol family 16 [ 0.380001] EISA bus registered [ 0.380001] ACPI: bus type pci registered [ 0.380001] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.380001] PCI: Not using MMCONFIG. [ 0.380001] PCI: PCI BIOS revision 3.00 entry at 0xf0031, last bus=4 [ 0.380001] PCI: Using configuration type 1 for base access [ 0.380001] ACPI: EC: Look up EC in DSDT [ 0.385727] ACPI: Interpreter enabled [ 0.385730] ACPI: (supports S0 S1 S3 S4 S5) [ 0.385744] ACPI: Using IOAPIC for interrupt routing [ 0.385784] PCI: MCFG configuration 0: base e0000000 segment 0 buses 0 - 255 [ 0.389471] PCI: MCFG area at e0000000 reserved in ACPI motherboard resources [ 0.389472] PCI: Using MMCONFIG for extended config space [ 0.395161] ACPI: No dock devices found. [ 0.395208] ACPI: PCI Root Bridge [PCI0] (0000:00) [ 0.395346] pci 0000:00:01.0: reg 10 io port: [0x4f00-0x4fff] [ 0.395378] pci 0000:00:01.1: reg 10 io port: [0x4900-0x493f] [ 0.395387] pci 0000:00:01.1: reg 20 io port: [0x4d00-0x4d3f] [ 0.395390] pci 0000:00:01.1: reg 24 io port: [0x4e00-0x4e3f] [ 0.395399] pci 0000:00:01.1: PME# supported from D3hot D3cold [ 0.395404] pci 0000:00:01.1: PME# disabled [ 0.395447] pci 0000:00:01.3: reg 10 32bit mmio: [0xfec80000-0xfecfffff] [ 0.395516] pci 0000:00:02.0: reg 10 32bit mmio: [0xdaf7f000-0xdaf7ffff] [ 0.395532] pci 0000:00:02.0: supports D1 D2 [ 0.395533] pci 0000:00:02.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.395535] pci 0000:00:02.0: PME# disabled [ 0.395555] pci 0000:00:02.1: reg 10 32bit mmio: [0xdaf7ec00-0xdaf7ecff] [ 0.395572] pci 0000:00:02.1: supports D1 D2 [ 0.395574] pci 0000:00:02.1: PME# supported from D0 D1 D2 D3hot D3cold [ 0.395576] pci 0000:00:02.1: PME# disabled [ 0.395623] pci 0000:00:05.0: reg 10 32bit mmio: [0xdaf78000-0xdaf7bfff] [ 0.395638] pci 0000:00:05.0: PME# supported from D3hot D3cold [ 0.395641] pci 0000:00:05.0: PME# disabled [ 0.395665] pci 0000:00:08.0: reg 10 io port: [0xee00-0xee07] [ 0.395668] pci 0000:00:08.0: reg 14 io port: [0xed80-0xed83] [ 0.395671] pci 0000:00:08.0: reg 18 io port: [0xed00-0xed07] [ 0.395674] pci 0000:00:08.0: reg 1c io port: [0xec00-0xec03] [ 0.395677] pci 0000:00:08.0: reg 20 io port: [0xeb80-0xeb8f] [ 0.395680] pci 0000:00:08.0: reg 24 32bit mmio: [0xdaf7d000-0xdaf7dfff] [ 0.395708] pci 0000:00:09.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.395710] pci 0000:00:09.0: PME# disabled [ 0.395729] pci 0000:00:0b.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.395731] pci 0000:00:0b.0: PME# disabled [ 0.395749] pci 0000:00:0c.0: PME# supported from D0 D1 D2 D3hot D3cold [ 0.395751] pci 0000:00:0c.0: PME# disabled [ 0.395833] pci 0000:01:09.0: reg 10 32bit mmio: [0xddeff800-0xddefffff] [ 0.395858] pci 0000:01:09.0: supports D1 D2 [ 0.395882] pci 0000:01:0a.0: reg 10 32bit mmio: [0xdc000000-0xdcffffff] [ 0.395925] pci 0000:01:0a.2: reg 10 32bit mmio: [0xdb000000-0xdbffffff] [ 0.395972] pci 0000:00:04.0: transparent bridge [ 0.395975] pci 0000:00:04.0: bridge 32bit mmio: [0xdb000000-0xddefffff] [ 0.396008] pci 0000:02:00.0: reg 10 32bit mmio: [0xdf000000-0xdfffffff] [ 0.396014] pci 0000:02:00.0: reg 14 64bit mmio: [0xc0000000-0xcfffffff] [ 0.396020] pci 0000:02:00.0: reg 1c 64bit mmio: [0xde000000-0xdeffffff] [ 0.396026] pci 0000:02:00.0: reg 30 32bit mmio: [0xddfe0000-0xddffffff] [ 0.396063] pci 0000:00:09.0: bridge 32bit mmio: [0xddf00000-0xdfffffff] [ 0.396066] pci 0000:00:09.0: bridge 64bit mmio pref: [0xc0000000-0xcfffffff] [ 0.396134] bus 00 -> node 0 [ 0.396139] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] [ 0.396326] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.P0P1._PRT] [ 0.396437] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR10._PRT] [ 0.396517] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR11._PRT] [ 0.396596] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.BR12._PRT] [ 0.401519] ACPI: PCI Interrupt Link [LNKA] (IRQs 16 17 18 19) *0, disabled. [ 0.401710] ACPI: PCI Interrupt Link [LNKB] (IRQs 16 17 18 19) *5 [ 0.401899] ACPI: PCI Interrupt Link [LNKC] (IRQs 16 17 18 19) *14 [ 0.402084] ACPI: PCI Interrupt Link [LNKD] (IRQs 16 17 18 19) *0, disabled. [ 0.402270] ACPI: PCI Interrupt Link [LNEA] (IRQs 16 17 18 19) *0, disabled. [ 0.402456] ACPI: PCI Interrupt Link [LNEB] (IRQs 16 17 18 19) *0, disabled. [ 0.402641] ACPI: PCI Interrupt Link [LNEC] (IRQs 16 17 18 19) *0, disabled. [ 0.402830] ACPI: PCI Interrupt Link [LNED] (IRQs 16 17 18 19) *10 [ 0.403019] ACPI: PCI Interrupt Link [LUB0] (IRQs 20 21 22 23) *14 [ 0.403208] ACPI: PCI Interrupt Link [LUB2] (IRQs 20 21 22 23) *7 [ 0.403393] ACPI: PCI Interrupt Link [LMAC] (IRQs 20 21 22 23) *0, disabled. [ 0.403582] ACPI: PCI Interrupt Link [LAZA] (IRQs 20 21 22 23) *10 [ 0.403773] ACPI: PCI Interrupt Link [LMC9] (IRQs 20 21 22 23) *0, disabled. [ 0.403962] ACPI: PCI Interrupt Link [LSMB] (IRQs 20 21 22 23) *11 [ 0.404165] ACPI: PCI Interrupt Link [LPMU] (IRQs 20 21 22 23) *5 [ 0.404358] ACPI: PCI Interrupt Link [LSA0] (IRQs 20 21 22 23) *11 [ 0.404548] ACPI: PCI Interrupt Link [LSA1] (IRQs 20 21 22 23) *0, disabled. [ 0.404764] ACPI: PCI Interrupt Link [LATA] (IRQs 20 21 22 23) *0, disabled. [ 0.404872] ACPI: WMI: Mapper loaded [ 0.405011] SCSI subsystem initialized [ 0.405042] libata version 3.00 loaded. [ 0.405077] usbcore: registered new interface driver usbfs [ 0.405092] usbcore: registered new interface driver hub [ 0.405110] usbcore: registered new device driver usb [ 0.405185] PCI: Using ACPI for IRQ routing [ 0.405251] Bluetooth: Core ver 2.13 [ 0.405251] NET: Registered protocol family 31 [ 0.405251] Bluetooth: HCI device and connection manager initialized [ 0.405251] Bluetooth: HCI socket layer initialized [ 0.405251] NET: Registered protocol family 8 [ 0.405251] NET: Registered protocol family 20 [ 0.405251] NetLabel: Initializing [ 0.405251] NetLabel: domain hash size = 128 [ 0.405251] NetLabel: protocols = UNLABELED CIPSOv4 [ 0.405251] NetLabel: unlabeled traffic allowed by default [ 0.405251] AppArmor: AppArmor Filesystem Enabled [ 0.405251] pnp: PnP ACPI init [ 0.405251] ACPI: bus type pnp registered [ 0.408681] pnp: PnP ACPI: found 12 devices [ 0.408683] ACPI: ACPI bus type pnp unregistered [ 0.408685] PnPBIOS: Disabled by ACPI PNP [ 0.408693] system 00:05: ioport range 0x4d0-0x4d1 has been reserved [ 0.408695] system 00:05: ioport range 0x800-0x80f has been reserved [ 0.408697] system 00:05: ioport range 0x4000-0x407f has been reserved [ 0.408699] system 00:05: ioport range 0x4080-0x40ff has been reserved [ 0.408701] system 00:05: ioport range 0x4400-0x447f has been reserved [ 0.408703] system 00:05: ioport range 0x4480-0x44ff has been reserved [ 0.408705] system 00:05: ioport range 0x4800-0x487f has been reserved [ 0.408707] system 00:05: ioport range 0x4880-0x48ff has been reserved [ 0.408709] system 00:05: ioport range 0x4c00-0x4c7f has been reserved [ 0.408711] system 00:05: ioport range 0x4c80-0x4cff has been reserved [ 0.408713] system 00:05: iomem range 0xfec80000-0xfd93ffff could not be reserved [ 0.408716] system 00:05: iomem range 0xfefe0000-0xfefe01ff has been reserved [ 0.408718] system 00:05: iomem range 0xfefe1000-0xfefe1fff has been reserved [ 0.408723] system 00:05: iomem range 0xfee01000-0xfeefffff has been reserved [ 0.408725] system 00:05: iomem range 0xffb80000-0xffffffff could not be reserved [ 0.408729] system 00:06: iomem range 0xfec00000-0xfec00fff has been reserved [ 0.408731] system 00:06: iomem range 0xfee00000-0xfee00fff has been reserved [ 0.408736] system 00:09: ioport range 0xa00-0xadf has been reserved [ 0.408738] system 00:09: ioport range 0xae0-0xaef has been reserved [ 0.408741] system 00:0a: iomem range 0xe0000000-0xefffffff has been reserved [ 0.408745] system 00:0b: iomem range 0x0-0x9ffff could not be reserved [ 0.408747] system 00:0b: iomem range 0xc0000-0xcffff could not be reserved [ 0.408749] system 00:0b: iomem range 0xe0000-0xfffff could not be reserved [ 0.408751] system 00:0b: iomem range 0x100000-0x3fffffff could not be reserved [ 0.408753] system 00:0b: iomem range 0xfec00000-0xffffffff could not be reserved [ 0.443399] pci 0000:00:04.0: PCI bridge, secondary bus 0000:01 [ 0.443401] pci 0000:00:04.0: IO window: disabled [ 0.443404] pci 0000:00:04.0: MEM window: 0xdb000000-0xddefffff [ 0.443406] pci 0000:00:04.0: PREFETCH window: disabled [ 0.443409] pci 0000:00:09.0: PCI bridge, secondary bus 0000:02 [ 0.443411] pci 0000:00:09.0: IO window: disabled [ 0.443413] pci 0000:00:09.0: MEM window: 0xddf00000-0xdfffffff [ 0.443415] pci 0000:00:09.0: PREFETCH window: 0x000000c0000000-0x000000cfffffff [ 0.443418] pci 0000:00:0b.0: PCI bridge, secondary bus 0000:03 [ 0.443420] pci 0000:00:0b.0: IO window: disabled [ 0.443422] pci 0000:00:0b.0: MEM window: disabled [ 0.443423] pci 0000:00:0b.0: PREFETCH window: disabled [ 0.443426] pci 0000:00:0c.0: PCI bridge, secondary bus 0000:04 [ 0.443427] pci 0000:00:0c.0: IO window: disabled [ 0.443429] pci 0000:00:0c.0: MEM window: disabled [ 0.443431] pci 0000:00:0c.0: PREFETCH window: disabled [ 0.443437] pci 0000:00:04.0: setting latency timer to 64 [ 0.443441] pci 0000:00:09.0: setting latency timer to 64 [ 0.443445] pci 0000:00:0b.0: setting latency timer to 64 [ 0.443448] pci 0000:00:0c.0: setting latency timer to 64 [ 0.443451] bus: 00 index 0 io port: [0x00-0xffff] [ 0.443452] bus: 00 index 1 mmio: [0x000000-0xffffffff] [ 0.443454] bus: 01 index 0 mmio: [0x0-0x0] [ 0.443455] bus: 01 index 1 mmio: [0xdb000000-0xddefffff] [ 0.443457] bus: 01 index 2 mmio: [0x0-0x0] [ 0.443458] bus: 01 index 3 io port: [0x00-0xffff] [ 0.443459] bus: 01 index 4 mmio: [0x000000-0xffffffff] [ 0.443461] bus: 02 index 0 mmio: [0x0-0x0] [ 0.443462] bus: 02 index 1 mmio: [0xddf00000-0xdfffffff] [ 0.443464] bus: 02 index 2 mmio: [0xc0000000-0xcfffffff] [ 0.443465] bus: 02 index 3 mmio: [0x0-0x0] [ 0.443466] bus: 03 index 0 mmio: [0x0-0x0] [ 0.443468] bus: 03 index 1 mmio: [0x0-0x0] [ 0.443469] bus: 03 index 2 mmio: [0x0-0x0] [ 0.443470] bus: 03 index 3 mmio: [0x0-0x0] [ 0.443472] bus: 04 index 0 mmio: [0x0-0x0] [ 0.443473] bus: 04 index 1 mmio: [0x0-0x0] [ 0.443474] bus: 04 index 2 mmio: [0x0-0x0] [ 0.443475] bus: 04 index 3 mmio: [0x0-0x0] [ 0.443483] NET: Registered protocol family 2 [ 0.443504] IP route cache hash table entries: 32768 (order: 5, 131072 bytes) [ 0.443504] TCP established hash table entries: 131072 (order: 8, 1048576 bytes) [ 0.444026] Switched to high resolution mode on CPU 0 [ 0.444474] TCP bind hash table entries: 65536 (order: 7, 524288 bytes) [ 0.444802] TCP: Hash tables configured (established 131072 bind 65536) [ 0.444805] TCP reno registered [ 0.444937] NET: Registered protocol family 1 [ 0.445032] checking if image is initramfs... it is [ 0.913238] Freeing initrd memory: 7415k freed [ 0.913317] cpufreq: No nForce2 chipset. [ 0.913423] audit: initializing netlink socket (disabled) [ 0.913436] type=2000 audit(1252219483.912:1): initialized [ 0.919378] highmem bounce pool size: 64 pages [ 0.919382] HugeTLB registered 4 MB page size, pre-allocated 0 pages [ 0.920248] VFS: Disk quotas dquot_6.5.1 [ 0.920287] Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) [ 0.920703] fuse init (API version 7.10) [ 0.920760] msgmni has been set to 1724 [ 0.920886] alg: No test for stdrng (krng) [ 0.920894] io scheduler noop registered [ 0.920895] io scheduler anticipatory registered [ 0.920896] io scheduler deadline registered [ 0.920908] io scheduler cfq registered (default) [ 0.920936] pci 0000:00:00.0: Enabling HT MSI Mapping [ 0.942499] pci 0000:00:04.0: Enabling HT MSI Mapping [ 0.942514] pci 0000:00:05.0: Enabling HT MSI Mapping [ 0.942527] pci 0000:00:08.0: Enabling HT MSI Mapping [ 0.942540] pci 0000:00:09.0: Enabling HT MSI Mapping [ 0.942553] pci 0000:00:0b.0: Enabling HT MSI Mapping [ 0.942566] pci 0000:00:0c.0: Enabling HT MSI Mapping [ 0.942588] pci 0000:02:00.0: Boot video device [ 0.946680] pcieport-driver 0000:00:09.0: setting latency timer to 64 [ 0.946700] pcieport-driver 0000:00:09.0: found MSI capability [ 0.946713] pcieport-driver 0000:00:09.0: irq 2303 for MSI/MSI-X [ 0.946718] pci_express 0000:00:09.0:pcie00: allocate port service [ 0.946729] pci_express 0000:00:09.0:pcie03: allocate port service [ 0.946756] pcieport-driver 0000:00:0b.0: setting latency timer to 64 [ 0.946773] pcieport-driver 0000:00:0b.0: found MSI capability [ 0.946783] pcieport-driver 0000:00:0b.0: irq 2302 for MSI/MSI-X [ 0.946788] pci_express 0000:00:0b.0:pcie00: allocate port service [ 0.946796] pci_express 0000:00:0b.0:pcie03: allocate port service [ 0.946823] pcieport-driver 0000:00:0c.0: setting latency timer to 64 [ 0.946840] pcieport-driver 0000:00:0c.0: found MSI capability [ 0.946849] pcieport-driver 0000:00:0c.0: irq 2301 for MSI/MSI-X [ 0.946854] pci_express 0000:00:0c.0:pcie00: allocate port service [ 0.946863] pci_express 0000:00:0c.0:pcie03: allocate port service [ 0.946899] pci_hotplug: PCI Hot Plug PCI Core version: 0.5 [ 0.946905] pciehp: PCI Express Hot Plug Controller Driver version: 0.4 [ 0.947005] input: Power Button (FF) as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input0 [ 0.947008] ACPI: Power Button (FF) [PWRF] [ 0.947044] input: Power Button (CM) as /devices/LNXSYSTM:00/device:00/PNP0C0C:00/input/input1 [ 0.947053] ACPI: Power Button (CM) [PWRB] [ 0.947214] processor ACPI_CPU:00: registered as cooling_device0 [ 0.950082] isapnp: Scanning for PnP cards... [ 1.302798] isapnp: No Plug & Play device found [ 1.303660] Serial: 8250/16550 driver4 ports, IRQ sharing enabled [ 1.304379] brd: module loaded [ 1.304624] loop: module loaded [ 1.304675] Fixed MDIO Bus: probed [ 1.304680] PPP generic driver version 2.4.2 [ 1.304723] input: Macintosh mouse button emulation as /devices/virtual/input/input2 [ 1.304741] Driver 'sd' needs updating - please use bus_type methods [ 1.304747] Driver 'sr' needs updating - please use bus_type methods [ 1.304885] sata_nv 0000:00:08.0: version 3.5 [ 1.305232] ACPI: PCI Interrupt Link [LSA0] enabled at IRQ 23 [ 1.305243] sata_nv 0000:00:08.0: PCI INT A -> Link[LSA0] -> GSI 23 (level, low) -> IRQ 23 [ 1.305293] sata_nv 0000:00:08.0: setting latency timer to 64 [ 1.305374] scsi0 : sata_nv [ 1.305447] scsi1 : sata_nv [ 1.305556] ata1: SATA max UDMA/133 cmd 0xee00 ctl 0xed80 bmdma 0xeb80 irq 23 [ 1.305559] ata2: SATA max UDMA/133 cmd 0xed00 ctl 0xec00 bmdma 0xeb88 irq 23 [ 1.772038] ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) [ 1.807522] ata1.00: ATA-8: MAXTOR STM3320613AS, MC1H, max UDMA/133 [ 1.807524] ata1.00: 625142448 sectors, multi 16: LBA48 NCQ (depth 0/32) [ 1.863556] ata1.00: configured for UDMA/133 [ 2.328036] ata2: SATA link up 1.5 Gbps (SStatus 113 SControl 300) [ 2.336117] ata2.00: ATAPI: Optiarc DVD RW AD-5240S, 1.01, max UDMA/100 [ 2.352129] ata2.00: configured for UDMA/100 [ 2.352716] scsi 0:0:0:0: Direct-Access ATA MAXTOR STM332061 MC1H PQ: 0 ANSI: 5 [ 2.352782] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB) [ 2.352794] sd 0:0:0:0: [sda] Write Protect is off [ 2.352796] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.352813] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.352862] sd 0:0:0:0: [sda] 625142448 512-byte hardware sectors: (320 GB/298 GiB) [ 2.352872] sd 0:0:0:0: [sda] Write Protect is off [ 2.352874] sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 [ 2.352890] sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA [ 2.352893] sda: sda1 sda2 < sda5 sda6 > [ 2.385316] sd 0:0:0:0: [sda] Attached SCSI disk [ 2.385355] sd 0:0:0:0: Attached scsi generic sg0 type 0 [ 2.386635] scsi 1:0:0:0: CD-ROM Optiarc DVD RW AD-5240S 1.01 PQ: 0 ANSI: 5 [ 2.391079] sr0: scsi3-mmc drive: 48x/48x writer cd/rw xa/form2 cdda tray [ 2.391082] Uniform CD-ROM driver Revision: 3.20 [ 2.391147] sr 1:0:0:0: Attached scsi CD-ROM sr0 [ 2.391172] sr 1:0:0:0: Attached scsi generic sg1 type 5 [ 2.391544] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver [ 2.391888] ACPI: PCI Interrupt Link [LUB2] enabled at IRQ 22 [ 2.391897] ehci_hcd 0000:00:02.1: PCI INT B -> Link[LUB2] -> GSI 22 (level, low) -> IRQ 22 [ 2.391913] ehci_hcd 0000:00:02.1: setting latency timer to 64 [ 2.391915] ehci_hcd 0000:00:02.1: EHCI Host Controller [ 2.391962] ehci_hcd 0000:00:02.1: new USB bus registered, assigned bus number 1 [ 2.391985] ehci_hcd 0000:00:02.1: debug port 1 [ 2.391989] ehci_hcd 0000:00:02.1: cache line size of 64 is not supported [ 2.392024] ehci_hcd 0000:00:02.1: irq 22, io mem 0xdaf7ec00 [ 2.404021] ehci_hcd 0000:00:02.1: USB 2.0 started, EHCI 1.00 [ 2.404078] usb usb1: configuration #1 chosen from 1 choice [ 2.404097] hub 1-0:1.0: USB hub found [ 2.404104] hub 1-0:1.0: 10 ports detected [ 2.404182] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver [ 2.404479] ACPI: PCI Interrupt Link [LUB0] enabled at IRQ 21 [ 2.404485] ohci_hcd 0000:00:02.0: PCI INT A -> Link[LUB0] -> GSI 21 (level, low) -> IRQ 21 [ 2.404493] ohci_hcd 0000:00:02.0: setting latency timer to 64 [ 2.404495] ohci_hcd 0000:00:02.0: OHCI Host Controller [ 2.404522] ohci_hcd 0000:00:02.0: new USB bus registered, assigned bus number 2 [ 2.404541] ohci_hcd 0000:00:02.0: irq 21, io mem 0xdaf7f000 [ 2.462038] usb usb2: configuration #1 chosen from 1 choice [ 2.462056] hub 2-0:1.0: USB hub found [ 2.462063] hub 2-0:1.0: 10 ports detected [ 2.462125] uhci_hcd: USB Universal Host Controller Interface driver [ 2.462173] usbcore: registered new interface driver libusual [ 2.462197] usbcore: registered new interface driver usbserial [ 2.462204] USB Serial support registered for generic [ 2.462213] usbcore: registered new interface driver usbserial_generic [ 2.462215] usbserial: USB Serial Driver core [ 2.462246] PNP: PS/2 Controller [PNP0303:PS2K,PNP0f03:PS2M] at 0x60,0x64 irq 1,12 [ 2.464210] serio: i8042 KBD port at 0x60,0x64 irq 1 [ 2.464214] serio: i8042 AUX port at 0x60,0x64 irq 12 [ 2.464305] mice: PS/2 mouse device common for all mice [ 2.464433] rtc_cmos 00:02: RTC can wake from S4 [ 2.464460] rtc_cmos 00:02: rtc core: registered rtc_cmos as rtc0 [ 2.464492] rtc0: alarms up to one year, y3k, 114 bytes nvram [ 2.464538] device-mapper: uevent: version 1.0.3 [ 2.464620] device-mapper: ioctl: 4.14.0-ioctl (2008-04-23) initialised: dm-devel@xxxxxxxxxx [ 2.464660] device-mapper: multipath: version 1.0.5 loaded [ 2.464662] device-mapper: multipath round-robin: version 1.0.0 loaded [ 2.464726] EISA: Probing bus 0 at eisa.0 [ 2.464737] Cannot allocate resource for EISA slot 4 [ 2.464746] EISA: Detected 0 cards. [ 2.464769] cpuidle: using governor ladder [ 2.464771] cpuidle: using governor menu [ 2.465135] TCP cubic registered [ 2.465205] NET: Registered protocol family 10 [ 2.465513] lo: Disabled Privacy Extensions [ 2.465737] NET: Registered protocol family 17 [ 2.465748] Bluetooth: L2CAP ver 2.11 [ 2.465750] Bluetooth: L2CAP socket layer initialized [ 2.465752] Bluetooth: SCO (Voice Link) ver 0.6 [ 2.465753] Bluetooth: SCO socket layer initialized [ 2.465771] Bluetooth: RFCOMM socket layer initialized [ 2.465777] Bluetooth: RFCOMM TTY layer initialized [ 2.465778] Bluetooth: RFCOMM ver 1.10 [ 2.465796] powernow-k8: Found 1 AMD Athlon(tm) 64 Processor 4000+ processors (1 cpu cores) (version 2.20.00) [ 2.469221] powernow-k8: BIOS error - no PSB or ACPI _PSS objects [ 2.469290] Using IPI No-Shortcut mode [ 2.469350] registered taskstats version 1 [ 2.469445] Magic number: 9:785:720 [ 2.469459] block loop0: hash matches [ 2.469542] rtc_cmos 00:02: setting system clock to 2009-09-06 06:44:45 UTC (1252219485) [ 2.469544] BIOS EDD facility v0.16 2004-Jun-25, 0 devices found [ 2.469546] EDD information not available. [ 2.469850] Freeing unused kernel memory: 532k freed [ 2.469945] Write protecting the kernel text: 4128k [ 2.469977] Write protecting the kernel read-only data: 1532k [ 2.510484] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input3 [ 2.772022] usb 1-4: new high speed USB device using ehci_hcd and address 3 [ 2.907492] usb 1-4: configuration #1 chosen from 1 choice [ 3.204039] usb 2-2: new low speed USB device using ohci_hcd and address 2 [ 3.250188] PM: Starting manual resume from disk [ 3.250191] PM: Resume from partition 8:5 [ 3.250193] PM: Checking hibernation image. [ 3.250400] PM: Resume from disk failed. [ 3.268901] kjournald starting. Commit interval 5 seconds [ 3.268910] EXT3-fs: mounted filesystem with ordered data mode. [ 3.417100] usb 2-2: configuration #1 chosen from 1 choice [ 4.332815] udev: starting version 141 [ 4.676155] i2c-adapter i2c-0: nForce2 SMBus adapter at 0x4d00 [ 4.676185] i2c-adapter i2c-1: nForce2 SMBus adapter at 0x4e00 [ 4.697584] usbcore: registered new interface driver hiddev [ 4.703323] input: Microsoft Microsoft 3-Button Mouse with IntelliEye(TM) as /devices/pci0000:00/0000:00:02.0/usb2/2-2/2-2:1.0/input/input4 [ 4.724323] generic-usb 0003:045E:0053.0001: input,hidraw0: USB HID v1.10 Mouse [Microsoft Microsoft 3-Button Mouse with IntelliEye(TM)] on usb-0000:00:02.0-2/input0 [ 4.724342] usbcore: registered new interface driver usbhid [ 4.724359] usbhid: v2.6:USB HID core driver [ 4.724390] cfg80211: Calling CRDA to update world regulatory domain [ 4.995347] Linux agpgart interface v0.103 [ 5.063761] input: PC Speaker as /devices/platform/pcspkr/input/input5 [ 5.357017] cfg80211: World regulatory domain updated: [ 5.357022] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 5.357024] (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5.357026] (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 5.357028] (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm) [ 5.357030] (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5.357032] (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm) [ 5.434386] nvidia: module license 'NVIDIA' taints kernel. [ 5.690766] ACPI: PCI Interrupt Link [LNED] enabled at IRQ 19 [ 5.690778] nvidia 0000:02:00.0: PCI INT A -> Link[LNED] -> GSI 19 (level, low) -> IRQ 19 [ 5.690784] nvidia 0000:02:00.0: setting latency timer to 64 [ 5.691953] NVRM: loading NVIDIA UNIX x86 Kernel Module 180.44 Mon Mar 23 14:59:10 PST 2009 [ 5.699787] Linux video capture interface: v2.00 [ 5.826449] synaptics was reset on resume, see synaptics_resume_reset if you have trouble on resume [ 5.840570] saa7130/34: v4l2 driver version 0.2.15 loaded [ 5.842324] ACPI: PCI Interrupt Link [LNKB] enabled at IRQ 18 [ 5.842336] saa7134 0000:01:09.0: PCI INT A -> Link[LNKB] -> GSI 18 (level, low) -> IRQ 18 [ 5.842341] saa7133[0]: found at 0000:01:09.0, rev: 209, irq: 18, latency: 64, mmio: 0xddeff800 [ 5.842346] saa7133[0]: subsystem: 0070:6707, board: Hauppauge WinTV-HVR1120 DVB-T/Hybrid [card=156,autodetected] [ 5.842423] saa7133[0]: board init: gpio is 40000 [ 5.885854] cx88/0: cx2388x v4l2 driver version 0.0.7 loaded [ 5.888171] cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.7 loaded [ 5.948607] ACPI: PCI Interrupt Link [LAZA] enabled at IRQ 20 [ 5.948619] HDA Intel 0000:00:05.0: PCI INT B -> Link[LAZA] -> GSI 20 (level, low) -> IRQ 20 [ 5.948688] HDA Intel 0000:00:05.0: setting latency timer to 64 [ 6.009471] usb 1-4: reset high speed USB device using ehci_hcd and address 3 [ 6.016016] saa7133[0]: i2c eeprom 00: 70 00 07 67 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 [ 6.016022] saa7133[0]: i2c eeprom 10: ff ff ff 0e ff 20 ff ff ff ff ff ff ff ff ff ff [ 6.016027] saa7133[0]: i2c eeprom 20: 01 40 01 32 32 01 01 33 88 ff 00 b0 ff ff ff ff [ 6.016032] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 6.016037] saa7133[0]: i2c eeprom 40: ff 35 00 c0 96 10 06 32 97 04 00 20 00 ff ff ff [ 6.016042] saa7133[0]: i2c eeprom 50: ff 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 6.016047] saa7133[0]: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 6.016052] saa7133[0]: i2c eeprom 70: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 6.016057] saa7133[0]: i2c eeprom 80: 84 09 00 04 20 77 00 40 5c 05 5f f0 73 05 29 00 [ 6.016064] saa7133[0]: i2c eeprom 90: 84 08 00 06 89 06 01 00 95 29 8d 72 07 70 73 09 [ 6.016069] saa7133[0]: i2c eeprom a0: 23 5f 73 0a f4 9b 72 0b 2f 72 0e 01 72 0f 01 72 [ 6.016074] saa7133[0]: i2c eeprom b0: 10 01 72 11 ff 73 13 a2 69 79 29 00 00 00 00 00 [ 6.016079] saa7133[0]: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 6.016084] saa7133[0]: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 6.016089] saa7133[0]: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 6.016094] saa7133[0]: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [ 6.016102] tveeprom 2-0050: Hauppauge model 67209, rev C2F5, serial# 6227292 [ 6.016104] tveeprom 2-0050: MAC address is 00-0D-FE-5F-05-5C [ 6.016106] tveeprom 2-0050: tuner model is NXP 18271C2 (idx 155, type 54) [ 6.016108] tveeprom 2-0050: TV standards PAL(B/G) PAL(I) SECAM(L/L') PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xf4) [ 6.016110] tveeprom 2-0050: audio processor is SAA7131 (idx 41) [ 6.016112] tveeprom 2-0050: decoder processor is SAA7131 (idx 35) [ 6.016114] tveeprom 2-0050: has radio, has IR receiver, has no IR transmitter [ 6.016115] saa7133[0]: hauppauge eeprom: model=67209 [ 6.088079] tuner 2-004b: chip found @ 0x96 (saa7133[0]) [ 6.141336] phy0: Selected rate control algorithm 'pid' [ 6.168025] tda829x 2-004b: setting tuner address to 60 [ 6.185859] zd1211rw 1-4:1.0: phy0 [ 6.185880] usbcore: registered new interface driver zd1211rw [ 6.215792] tda18271 2-0060: creating new instance [ 6.264015] TDA18271HD/C2 detected @ 2-0060 [ 6.272186] psmouse serio1: ID: 00 00 64<6>hda_codec: Unknown model for ALC883, trying auto-probe from BIOS... [ 6.771086] input: ImPS/2 Generic Wheel Mouse as /devices/platform/i8042/serio1/input/input6 [ 7.596020] tda18271: performing RF tracking filter calibration [ 25.800017] tda18271: RF tracking filter calibration complete [ 25.856015] tda829x 2-004b: type set to tda8290+18271 [ 30.832126] saa7133[0]: registered device video0 [v4l2] [ 30.832167] saa7133[0]: registered device vbi0 [ 30.832202] saa7133[0]: registered device radio0 [ 30.834032] ACPI: PCI Interrupt Link [LNKC] enabled at IRQ 17 [ 30.834043] cx8800 0000:01:0a.0: PCI INT A -> Link[LNKC] -> GSI 17 (level, low) -> IRQ 17 [ 30.834561] cx88[0]: subsystem: 1421:0334, board: ADS Tech Instant TV DVB-T PCI [card=29,autodetected], frontend(s): 1 [ 30.834563] cx88[0]: TV tuner type 4, Radio tuner type -1 [ 30.861108] saa7134 ALSA driver for DMA sound loaded [ 30.861131] saa7133[0]/alsa: saa7133[0] at 0xddeff800 irq 18 registered as card -2 [ 30.897279] dvb_init() allocating 1 frontend [ 30.979238] input: cx88 IR (ADS Tech Instant TV DV as /devices/pci0000:00/0000:00:04.0/0000:01:0a.0/input/input7 [ 30.979389] cx88[0]/0: found at 0000:01:0a.0, rev: 5, irq: 17, latency: 64, mmio: 0xdc000000 [ 30.979497] cx88[0]/0: registered device video1 [v4l2] [ 30.979575] cx88[0]/0: registered device vbi1 [ 30.979623] cx88[0]/2: cx2388x 8802 Driver Manager [ 30.979636] cx88-mpeg driver manager 0000:01:0a.2: PCI INT A -> Link[LNKC] -> GSI 17 (level, low) -> IRQ 17 [ 30.979642] cx88[0]/2: found at 0000:01:0a.2, rev: 5, irq: 17, latency: 64, mmio: 0xdb000000 [ 31.033790] tda829x 2-004b: type set to tda8290 [ 31.048102] tda18271 2-0060: attaching existing instance [ 31.048107] DVB: registering new adapter (saa7133[0]) [ 31.048110] DVB: registering adapter 0 frontend 0 (NXP TDA10048HN DVB-T)... [ 31.142367] lp: driver loaded but no devices found [ 31.326177] Adding 995988k swap on /dev/sda5. Priority:-1 extents:1 across:995988k [ 31.376020] tda10048_firmware_upload: waiting for firmware upload (dvb-fe-tda10048-1.0.fw)... [ 31.376025] saa7134 0000:01:09.0: firmware: requesting dvb-fe-tda10048-1.0.fw [ 31.491126] tda10048_firmware_upload: firmware read 24878 bytes. [ 31.491129] tda10048_firmware_upload: firmware uploading [ 32.262922] EXT3 FS on sda1, internal journal [ 34.068283] SGI XFS with ACLs, security attributes, realtime, large block numbers, no debug enabled [ 34.071216] SGI XFS Quota Management subsystem [ 34.166219] XFS mounting filesystem sda6 [ 34.390670] Ending clean XFS mount for filesystem: sda6 [ 35.602762] type=1505 audit(1252219518.630:2): operation="profile_load" name="/sbin/dhclient-script" name2="default" pid=2129 [ 35.602905] type=1505 audit(1252219518.630:3): operation="profile_load" name="/sbin/dhclient3" name2="default" pid=2129 [ 35.602950] type=1505 audit(1252219518.630:4): operation="profile_load" name="/usr/lib/NetworkManager/nm-dhcp-client.action" name2="default" pid=2129 [ 35.602990] type=1505 audit(1252219518.630:5): operation="profile_load" name="/usr/lib/connman/scripts/dhclient-script" name2="default" pid=2129 [ 35.624033] tda10048_firmware_upload: firmware uploaded [ 35.732088] type=1505 audit(1252219518.762:6): operation="profile_load" name="/usr/lib/cups/backend/cups-pdf" name2="default" pid=2134 [ 35.732267] type=1505 audit(1252219518.762:7): operation="profile_load" name="/usr/sbin/cupsd" name2="default" pid=2134 [ 35.756937] type=1505 audit(1252219518.786:8): operation="profile_load" name="/usr/sbin/mysqld" name2="default" pid=2138 [ 35.782388] type=1505 audit(1252219518.810:9): operation="profile_load" name="/usr/sbin/tcpdump" name2="default" pid=2142 [ 35.801808] cx88/2: cx2388x dvb driver version 0.0.7 loaded [ 35.801812] cx88/2: registering cx8802 driver, type: dvb access: shared [ 35.801815] cx88[0]/2: subsystem: 1421:0334, board: ADS Tech Instant TV DVB-T PCI [card=29] [ 35.801817] cx88[0]/2: cx2388x based DVB/ATSC card [ 35.801819] cx8802_alloc_frontends() allocating 1 frontend(s) [ 35.863408] DVB: registering new adapter (cx88[0]) [ 35.863412] DVB: registering adapter 1 frontend 0 (Zarlink MT352 DVB-T)... [ 44.424021] tda18271_write_regs: ERROR: i2c_transfer returned: -5 [ 44.424026] tda18271c2_rf_tracking_filters_correction: error -5 on line 244 [ 47.550095] Bluetooth: BNEP (Ethernet Emulation) ver 1.3 [ 47.550098] Bluetooth: BNEP filters: protocol multicast [ 47.590635] Bridge firewalling registered [ 49.902629] ppdev: user-space parallel port driver [ 52.970522] usb 1-4: firmware: requesting zd1211/zd1211b_ub [ 53.009126] usb 1-4: firmware: requesting zd1211/zd1211b_uphr [ 53.074175] zd1211rw 1-4:1.0: firmware version 4725 [ 53.114158] zd1211rw 1-4:1.0: zd1211b chip 0ace:1215 v4810 high 00-0e-8e AL2230_RF pa0 g--NS [ 53.116534] cfg80211: Calling CRDA for country: DE [ 53.118749] cfg80211: Regulatory domain changed to country: DE [ 53.118752] (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp) [ 53.118754] (2400000 KHz - 2483500 KHz @ 40000 KHz), (N/A, 2000 mBm) [ 53.118756] (5150000 KHz - 5255000 KHz @ 40000 KHz), (N/A, 2301 mBm) [ 53.118758] (5470000 KHz - 5650000 KHz @ 40000 KHz), (N/A, 3000 mBm) [ 53.130556] ADDRCONF(NETDEV_UP): wlan0: link is not ready [ 53.974327] wlan0: direct probe to AP 00:17:33:ad:cd:28 try 1 [ 53.976212] wlan0 direct probe responded [ 53.976215] wlan0: authenticate with AP 00:17:33:ad:cd:28 [ 53.982121] wlan0: authenticated [ 53.982126] wlan0: associate with AP 00:17:33:ad:cd:28 [ 53.986044] wlan0: RX AssocResp from 00:17:33:ad:cd:28 (capab=0x401 status=0 aid=1) [ 53.986047] wlan0: associated [ 53.986400] ADDRCONF(NETDEV_CHANGE): wlan0: link becomes ready [ 54.072521] wlan0: disassociating by local choice (reason=3) [ 61.215643] wlan0: authenticate with AP 00:40:f4:e8:c5:4d [ 61.217907] wlan0: authenticated [ 61.217912] wlan0: associate with AP 00:40:f4:e8:c5:4d [ 61.221403] wlan0: RX AssocResp from 00:40:f4:e8:c5:4d (capab=0x431 status=0 aid=1) [ 61.221406] wlan0: associated [ 64.908015] wlan0: no IPv6 routers present thanks for any help -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
