On 08/21/2009 04:21 PM, Alexander Saers wrote:
Hello
I have a Anysee E30 Combo Plus USB device. It's capable of both DVB-C and
DVB-T. I currently use the device with ubuntu 9.04 64bit with mythtv. I have
problem with selction of mode for the device
The following way i can get DVB-T
1. Power up computer with E30 Combo Plus connected.
2. run dmesg
Anyone experienced this problem? It would be nice to run DVB-C without
having to disconnect and connect hardware.
You are not alone.
Looks like it is GPIO related problem. I don't have currently that device...
It is a little bit hard to fix without knowing exactly how GPIO pins are
connected in each device. There is too many different hardware revisions
with different GPIOs, fix one break the other.
From the anysee.c code you can find following entry:
/* Try to attach demodulator in following order:
model demod hw firmware
1. E30 MT352 02 0.2.1
2. E30 ZL10353 02 0.2.1
3. E30 Combo ZL10353 0f 0.1.2 DVB-T/C combo
4. E30 Plus ZL10353 06 0.1.0
5. E30C Plus TDA10023 0a 0.1.0 rev 0.2
E30C Plus TDA10023 0f 0.1.2 rev 0.4
E30 Combo TDA10023 0f 0.1.2 DVB-T/C combo
*/
Antti
--
http://palosaari.fi/
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
