I got rid of the old modules and compiled new ones: dmesg | grep cx88: cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.7 loaded cx88[0]: subsystem: 14f1:8852, board: Geniatech X8000-MT DVBT [card=63,autodetected], frontend(s): 1 cx88[0]: TV tuner type 71, Radio tuner type 0 cx88[0]: Test OK cx88/0: cx2388x v4l2 driver version 0.0.7 loaded cx88_alsa: disagrees about version of symbol snd_ctl_add cx88_alsa: Unknown symbol snd_ctl_add cx88_alsa: disagrees about version of symbol snd_pcm_new cx88_alsa: Unknown symbol snd_pcm_new cx88_alsa: disagrees about version of symbol snd_card_register cx88_alsa: Unknown symbol snd_card_register cx88_alsa: disagrees about version of symbol snd_card_free cx88_alsa: Unknown symbol snd_card_free cx88_alsa: disagrees about version of symbol snd_ctl_new1 cx88_alsa: Unknown symbol snd_ctl_new1 cx88_alsa: Unknown symbol snd_card_new cx88_alsa: disagrees about version of symbol snd_ctl_boolean_mono_info cx88_alsa: Unknown symbol snd_ctl_boolean_mono_info cx88_alsa: disagrees about version of symbol snd_pcm_lib_ioctl cx88_alsa: Unknown symbol snd_pcm_lib_ioctl cx88_alsa: disagrees about version of symbol snd_pcm_hw_constraint_pow2 cx88_alsa: Unknown symbol snd_pcm_hw_constraint_pow2 cx88_alsa: disagrees about version of symbol snd_pcm_set_ops cx88_alsa: Unknown symbol snd_pcm_set_ops cx88_alsa: disagrees about version of symbol snd_pcm_period_elapsed cx88_alsa: Unknown symbol snd_pcm_period_elapsed tuner 1-0061: chip found @ 0xc2 (cx88[0]) cx88[0]: Asking xc2028/3028 to load firmware xc3028-v27.fw cx88[0]/2: cx2388x 8802 Driver Manager cx88-mpeg driver manager 0000:02:06.2: PCI INT A -> GSI 20 (level, low) -> IRQ 20 cx88[0]/2: found at 0000:02:06.2, rev: 5, irq: 20, latency: 32, mmio: 0xfa000000 cx8800 0000:02:06.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 cx88[0]/0: found at 0000:02:06.0, rev: 5, irq: 20, latency: 32, mmio: 0xf9000000 cx88[0]/0: registered device video0 [v4l2] cx88[0]/0: registered device vbi0 cx88[0]/0: registered device radio0 cx88/2: cx2388x dvb driver version 0.0.7 loaded cx88/2: registering cx8802 driver, type: dvb access: shared cx88[0]/2: subsystem: 14f1:8852, board: Geniatech X8000-MT DVBT [card=63] cx88[0]/2: cx2388x based DVB/ATSC card cx8802_alloc_frontends() allocating 1 frontend(s) cx88[0]/2: xc3028 attached DVB: registering new adapter (cx88[0]) --------------------- lsmod | grep cx88: cx88_dvb 22812 2 cx88_vp3054_i2c 3112 1 cx88_dvb videobuf_dvb 8140 1 cx88_dvb dvb_core 97216 8 stv0299,or51211,or51132,lgdt330x,lgdt3305,dvb_ttpci,cx88_dvb,videobuf_dvb cx8800 36748 0 cx8802 17132 1 cx88_dvb cx88xx 81868 3 cx88_dvb,cx8800,cx8802 ir_common 54316 1 cx88xx i2c_algo_bit 7004 2 cx88_vp3054_i2c,cx88xx v4l2_common 19832 4 au8522,tuner,cx8800,cx88xx videodev 40048 6 au8522,saa7146_vv,tuner,cx8800,cx88xx,v4l2_common tveeprom 13868 1 cx88xx videobuf_dma_sg 14348 5 saa7146_vv,cx88_dvb,cx8800,cx8802,cx88xx btcx_risc 5120 3 cx8800,cx8802,cx88xx videobuf_core 20492 6 saa7146_vv,videobuf_dvb,cx8800,cx8802,cx88xx,videobuf_dma_sg i2c_core 35312 77 zl10039,zl10036,ves1x93,ves1820,tua6100,tda826x,tda8261,tda8083,tda10086,tda1004x,tda10048,tda10023,tda10021,stv6110x,stv6110,stv090x,stv0900,stv0299,stv0297,stv0288,stb6100,stb6000,stb0899,sp887x,sp8870,si21xx,s921,s5h1420,s5h1411,s5h1409,or51211,or51132,nxt6000,nxt200x,mt352,mt312,lnbp21,lgs8gxx,lgs8gl5,lgdt330x,lgdt3305,lgdt3304,l64781,itd1000,isl6423,isl6421,isl6405,dvb_pll,drx397xD,dib7000p,dib7000m,dib3000mc,dibx000_common,dib3000mb,dib0070,cx24123,cx24116,cx24113,cx24110,cx22702,cx22700,bcm3510,au8522,af9013,dvb_ttpci,ttpci_eeprom,zl10353,cx88_vp3054_i2c,tuner_xc2028,tuner,cx8800,cx88xx,i2c_algo_bit,v4l2_common,videodev,tveeprom,i2c_piix4 -------------------------------------------------------- Then I checked the tuner. dmesg says: firmware: requesting xc3028-v27.fw xc2028 1-0061: Error: firmware xc3028-v27.fw not found. saa7146: register extension 'dvb'. -------------------- I then tried a procedure I found here: http://www.linuxtv.org/wiki/index.php/Xceive_XC3028/XC2028#How_to_Obtain_the_Firmware but that didn't work for me.. just as it says here: http://www.linuxtv.org/wiki/index.php/DVB-T_PCI_Cards It all comes down to the tuner.. any ideas how to solve this issue? I downloaded the Windows drivers of the x3m hpc2000 and tried using the script "extract_xc3028.pl" on it, but it couldn't find "hcw85bda.sys".. so the script is limited to this file.. wish I knew how to rewrite this skript.. -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
