I finally found a solution to run my tunerTV identified as eb1a:2881 and based on em28xx drivers. I have copied the firmware xc3028.fw (found here http://www.steventoth.net/linux/hvr1500/ ) and firmware_v3 (found here http://konstantin.filtschew.de/v4l-firmware/) in the folder /lib/firmware. Then I run these commands sudo rmmod em28xx_dvb sudo rmmod em28xx sudo modprobe em28xx card=10 i2c_scan=1 sudo rmmod em28xx_dvb sudo rmmod em28xx sudo modprobe em28xx card=11 i2c_scan=1 and my tuner works well. I remember that my tuner is this http://www.conitech.it/conitech/ita/prod.asp?cod=CN610DVB-DT and and I use the 2.6.31 kernel of the ubuntu team. Now the output of "dmesg | grep em28xx" is: " [10860.082702] em28xx: New device @ 480 Mbps (eb1a:2881, interface 0, class 0) [10860.082707] em28xx #0: Identified as Hauppauge WinTV HVR 900 (card=10) [10860.082871] em28xx #0: chip ID is em2882/em2883 [10860.259158] em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 81 28 58 12 5c 03 6a 20 6a 00 [10860.259190] em28xx #0: i2c eeprom 10: 00 00 04 57 64 80 00 00 60 f4 00 00 02 02 00 00 [10860.259220] em28xx #0: i2c eeprom 20: 56 00 01 00 00 00 01 00 b8 00 00 00 5b 1e 00 00 [10860.259248] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 10 01 00 00 00 00 00 00 [10860.259277] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [10860.259305] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [10860.259333] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 53 00 [10860.259361] em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 38 00 31 00 20 00 56 00 [10860.259389] em28xx #0: i2c eeprom 80: 69 00 64 00 65 00 6f 00 00 00 00 00 00 00 00 00 [10860.259417] em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [10860.259445] em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [10860.259474] em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [10860.259518] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [10860.259546] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [10860.259574] em28xx #0: i2c eeprom e0: 5a 00 55 aa e5 2b 59 03 00 17 fc 01 00 00 00 00 [10860.259603] em28xx #0: i2c eeprom f0: 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 [10860.259633] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0x4dea2120 [10860.259638] em28xx #0: EEPROM info: [10860.259642] em28xx #0: AC97 audio (5 sample rates) [10860.259647] em28xx #0: USB Remote wakeup capable [10860.259651] em28xx #0: 500mA max power [10860.259657] em28xx #0: Table at 0x04, strings=0x206a, 0x006a, 0x0000 [10860.294498] em28xx #0: found i2c device @ 0xa0 [eeprom] [10860.299115] em28xx #0: found i2c device @ 0xb8 [tvp5150a] [10860.301115] em28xx #0: found i2c device @ 0xc2 [tuner (analog)] [10860.318921] tvp5150 3-005c: chip found @ 0xb8 (em28xx #0) [10860.324045] tuner 3-0061: chip found @ 0xc2 (em28xx #0) [10860.324140] input: em28xx IR (em28xx #0) as /devices/pci0000:00/0000:00:1d.7/usb2/2-3/input/input15 [10860.324352] em28xx #0: Config register raw data: 0x58 [10860.325104] em28xx #0: AC97 vendor ID = 0xffffffff [10860.325489] em28xx #0: AC97 features = 0x6a90 [10860.325491] em28xx #0: Empia 202 AC97 audio processor detected [10860.565878] em28xx #0: v4l2 driver version 0.1.2 [10860.652239] em28xx #0: V4L2 device registered as /dev/video1 and /dev/vbi0 [10860.652267] usbcore: registered new interface driver em28xx [10860.652270] em28xx driver loaded [10860.782585] em28xx #0/2: xc3028 attached [10860.782587] DVB: registering new adapter (em28xx #0) [10860.784221] Successfully loaded em28xx-dvb [10862.248405] usbcore: deregistering interface driver em28xx [10862.248430] em28xx #0: disconnecting em28xx #0 video [10862.284067] em28xx #0: V4L2 device /dev/vbi0 deregistered [10862.284185] em28xx #0: V4L2 device /dev/video1 deregistered [10863.095071] em28xx: New device @ 480 Mbps (eb1a:2881, interface 0, class 0) [10863.095078] em28xx #0: Identified as Terratec Hybrid XS (card=11) [10863.095252] em28xx #0: chip ID is em2882/em2883 [10863.255407] em28xx #0: i2c eeprom 00: 1a eb 67 95 1a eb 81 28 58 12 5c 03 6a 20 6a 00 [10863.255440] em28xx #0: i2c eeprom 10: 00 00 04 57 64 80 00 00 60 f4 00 00 02 02 00 00 [10863.255469] em28xx #0: i2c eeprom 20: 56 00 01 00 00 00 01 00 b8 00 00 00 5b 1e 00 00 [10863.255498] em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 10 01 00 00 00 00 00 00 [10863.255526] em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [10863.255554] em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [10863.255582] em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 53 00 [10863.255611] em28xx #0: i2c eeprom 70: 42 00 20 00 32 00 38 00 38 00 31 00 20 00 56 00 [10863.255639] em28xx #0: i2c eeprom 80: 69 00 64 00 65 00 6f 00 00 00 00 00 00 00 00 00 [10863.255667] em28xx #0: i2c eeprom 90: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [10863.255703] em28xx #0: i2c eeprom a0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [10863.255731] em28xx #0: i2c eeprom b0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [10863.255759] em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [10863.255787] em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 [10863.255815] em28xx #0: i2c eeprom e0: 5a 00 55 aa e5 2b 59 03 00 17 fc 01 00 00 00 00 [10863.255843] em28xx #0: i2c eeprom f0: 00 00 00 01 00 00 00 00 00 00 00 00 00 00 00 00 [10863.255874] em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0x4dea2120 [10863.255879] em28xx #0: EEPROM info: [10863.255883] em28xx #0: AC97 audio (5 sample rates) [10863.255888] em28xx #0: USB Remote wakeup capable [10863.255892] em28xx #0: 500mA max power [10863.255898] em28xx #0: Table at 0x04, strings=0x206a, 0x006a, 0x0000 [10863.262273] em28xx #0: found i2c device @ 0x1e [???] [10863.304144] em28xx #0: found i2c device @ 0xa0 [eeprom] [10863.308888] em28xx #0: found i2c device @ 0xb8 [tvp5150a] [10863.311008] em28xx #0: found i2c device @ 0xc2 [tuner (analog)] [10863.325552] tvp5150 3-005c: chip found @ 0xb8 (em28xx #0) [10863.329594] tuner 3-0061: chip found @ 0xc2 (em28xx #0) [10864.516289] em28xx #0: Config register raw data: 0x58 [10864.517385] em28xx #0: AC97 vendor ID = 0xffffffff [10864.517914] em28xx #0: AC97 features = 0x6a90 [10864.517920] em28xx #0: Empia 202 AC97 audio processor detected [10864.728935] em28xx #0: v4l2 driver version 0.1.2 [10864.800468] em28xx #0: V4L2 device registered as /dev/video1 and /dev/vbi0 [10864.822120] usbcore: registered new interface driver em28xx [10864.822129] em28xx driver loaded [10864.865858] em28xx #0/2: xc3028 attached [10864.865861] DVB: registering new adapter (em28xx #0) [10864.866164] Successfully loaded em28xx-dvb " Thanks for the your support and if there are news you contact me. Regards, Emanuele -- Caselle da 1GB, trasmetti allegati fino a 3GB e in piu' IMAP, POP3 e SMTP autenticato? GRATIS solo con Email.it: http://www.email.it/f Sponsor: Ricevi e invia messaggi di posta, instant messaging e rimani in contatto ovunque ti trovi direttamente dal cellulare, con m.email. Provalo gratuitamente Clicca qui: http://adv.email.it/cgi-bin/foclick.cgi?mid=8920&d=20090818 -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
