Hi there, I'm new in this list, so it may be the wrong place. If so, please excuse me and let me know, which list I should attend. My problem: I just want to test me-tv to use DVB-T TV, but it reclaims: There are no available DVB tuner devices What I did until now: 1) Downloaded the v4l-dvb tree 2) compiled and loaded the modules 3) checked the modules lsmod | grep em28 em28xx_dvb 9588 0 dvb_core 89792 1 em28xx_dvb em28xx_alsa 8564 0 em28xx 86304 2 em28xx_dvb,em28xx_alsa ir_common 44836 1 em28xx v4l2_common 16560 3 tuner,tvp5150,em28xx videodev 35872 4 tuner,tvp5150,em28xx,v4l2_common videobuf_vmalloc 6852 1 em28xx videobuf_core 16388 2 em28xx,videobuf_vmalloc tveeprom 13716 1 em28xx snd_pcm 79368 3 em28xx_alsa,snd_hda_intel,snd_hda_codec snd 65112 11 em28xx_alsa,snd_hda_codec_realtek,snd_hda_intel,snd_hda_codec,snd_hwdep,snd_pcm,snd_timer i2c_core 22288 10 zl10353,tuner_xc2028,tuner,tvp5150,em28xx,v4l2_common,videodev,tveeprom,nvidia,i2c_i801 4) looked at the output of dmesg dmesg (excerpt) Linux video capture interface: v2.00 usbcore: registered new interface driver em28xx em28xx driver loaded Em28xx: Initialized (Em28xx dvb Extension) extension Em28xx: Initialized (Em28xx Audio Extension) extension usb 2-5: new high speed USB device using ehci_hcd and address 2 usb 2-5: New USB device found, idVendor=2040, idProduct=6502 usb 2-5: New USB device strings: Mfr=0, Product=1, SerialNumber=2 usb 2-5: Product: WinTV HVR-900 usb 2-5: SerialNumber: 4028599240 usb 2-5: configuration #1 chosen from 1 choice em28xx: New device WinTV HVR-900 @ 480 Mbps (2040:6502, interface 0, class 0) em28xx #0: Identified as Hauppauge WinTV HVR 900 (card=10) em28xx #0: chip ID is em2882/em2883 em28xx #0: i2c eeprom 00: 1a eb 67 95 40 20 02 65 d0 12 5c 03 82 1e 6a 18 em28xx #0: i2c eeprom 10: 00 00 24 57 66 07 01 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 02 00 b8 00 00 00 5b e0 00 00 em28xx #0: i2c eeprom 30: 00 00 20 40 20 6e 02 20 10 01 01 01 00 00 00 00 em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 18 03 34 00 30 00 em28xx #0: i2c eeprom 70: 32 00 38 00 35 00 39 00 39 00 32 00 34 00 30 00 em28xx #0: i2c eeprom 80: 00 00 1e 03 57 00 69 00 6e 00 54 00 56 00 20 00 em28xx #0: i2c eeprom 90: 48 00 56 00 52 00 2d 00 39 00 30 00 30 00 00 00 em28xx #0: i2c eeprom a0: 84 12 00 00 05 50 1a 7f d4 78 23 fa fd d0 28 89 em28xx #0: i2c eeprom b0: ff 00 00 00 04 84 0a 00 01 01 20 77 00 40 c8 8b em28xx #0: i2c eeprom c0: 1f f0 74 02 01 00 01 79 d8 00 00 00 00 00 00 00 em28xx #0: i2c eeprom d0: 84 12 00 00 05 50 1a 7f d4 78 23 fa fd d0 28 89 em28xx #0: i2c eeprom e0: ff 00 00 00 04 84 0a 00 01 01 20 77 00 40 c8 8b em28xx #0: i2c eeprom f0: 1f f0 74 02 01 00 01 79 d8 00 00 00 00 00 00 00 em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0xc93735dd em28xx #0: EEPROM info: em28xx #0: AC97 audio (5 sample rates) em28xx #0: 500mA max power em28xx #0: Table at 0x24, strings=0x1e82, 0x186a, 0x0000 tveeprom 3-0050: Hauppauge model 65018, rev B2C0, serial# 2067400 tveeprom 3-0050: tuner model is Xceive XC3028 (idx 120, type 71) tveeprom 3-0050: TV standards PAL(B/G) PAL(I) PAL(D/D1/K) ATSC/DVB Digital (eeprom 0xd4) tveeprom 3-0050: audio processor is None (idx 0) tveeprom 3-0050: has radio tvp5150 3-005c: chip found @ 0xb8 (em28xx #0) tuner 3-0061: chip found @ 0xc2 (em28xx #0) xc2028 3-0061: creating new instance xc2028 3-0061: type set to XCeive xc2028/xc3028 tuner usb 2-5: firmware: requesting xc3028-v27.fw xc2028 3-0061: Loading 80 firmware images from xc3028-v27.fw, type: xc2028 firmware, ver 2.7 xc2028 3-0061: Loading firmware for type=BASE MTS (5), id 0000000000000000. xc2028 3-0061: Loading firmware for type=MTS (4), id 000000000000b700. xc2028 3-0061: Loading SCODE for type=MTS LCD NOGD MONO IF SCODE HAS_IF_4500 (6002b004), id 000000000000b700. input: em28xx IR (em28xx #0) as /devices/pci0000:00/0000:00:1d.7/usb2/2-5/input/input6 em28xx #0: Config register raw data: 0xd0 em28xx #0: AC97 vendor ID = 0xffffffff em28xx #0: AC97 features = 0x6a90 em28xx #0: Empia 202 AC97 audio processor detected tvp5150 3-005c: tvp5150am1 detected. em28xx #0: v4l2 driver version 0.1.2 em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0 zl10353_read_register: readreg error (reg=127, ret==-19) em28xx #0/2: dvb frontend not attached. Can't attach xc3028 em28xx-audio.c: probing for em28x1 non standard usbaudio em28xx-audio.c: Copyright (C) 2006 Markus Rechberger tvp5150 3-005c: tvp5150am1 detected. I searched the net for the error messages zl10353_read_register: readreg error (reg=127, ret==-19) and em28xx #0/2: dvb frontend not attached. Can't attach xc3028 but that wasn't very helpful. Is there anybody, who can give me a hint? Where is my mistake? Any help is appreciated! In http://www.linuxtv.org/wiki/index.php/Em28xx_devices#How_to_compile_the_latest_em28xx_driver.3F the stick is announced as validated. Many thanks in advance Jobst PS. With earlier kernels - without em28xx support - I've succeeded by using the kernel modules of M. Rechberger. -- J. Hoffmann email: j.hoffmann@xxxxxxxxxxxx -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
