I have a Pinnacle 3010ix which I am trying to get to work under Linux. The chips it uses are the SAA7162 video decoder/analog demodulator/PCI-E controller, TDA8265A TV tuner (x2) and TDA10046A DVB-T demodulator (x2). So far I have managed to load the driver for this card (vendor 1131, product 7162, subsystem vendor 11bd, subsystem product 100), which is saa716x, compiled from http://www.jusst.de/hg/saa716x/. The current problem is that the TDA10046A driver (tda1004x) is reporting "Invalid tda1004x ID = 0xff. Can't proceed", which seems to indicate either a firmware problem (I am using the latest available firmware from the get-dvb-firmware script), or some kind of driver issue. The SAA7162 seems to be functional, and /dev/dvb shows adapter0 and adapter1, under which are demux0, dvr0 and net0, but notably not frontend0, which suggests, as one might expect, that the frontend failed to initialise. Pertinent dmesg output as follows: [ 3163.548084] SAA716x Hybrid 0000:01:00.0: PCI INT A -> GSI 16 (level, low) -> IRQ 16 [ 3163.548093] SAA716x Hybrid 0000:01:00.0: setting latency timer to 64 [ 3163.605331] DVB: registering new adapter (SAA716x dvb adapter) [ 3163.713096] Invalid tda1004x ID = 0xff. Can't proceed [ 3163.713104] DVB: registering new adapter (SAA716x dvb adapter) [ 3163.824165] Invalid tda1004x ID = 0xff. Can't proceed Any advice on getting the TDA1004A to work? Regards, Nick Spooner -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
