On 26 июля 2009 01:12:14 Shaun Murdoch wrote: > Hi Igor, > > I've taken some photos of the tuner so that hopefully you'll be able > to help work out why it won't tune in Linux. > > Please see the following link for the images: > http://www.flickr.com/photos/7690303@N04/sets/72157621703527801/ I have a few dm1105 based cards, but yours looks different from mine. > > The only chip on display is: > SDMC > DM1105N > D735 E280034 Please try recent v4l-dvb, as I've commited some change. Now You can try modprobe dm1105 card=1 > > Also - I tested the card in a Windows box today, so I am now certain > that both the card and the satellite connection are OK. The settings > that work with Windows (frequency, etc), don't lock in Linux. (I do > get a good signal reading in Kaffeine that is the same as Windows > gives, but no lock.) > > I hope this will help you work out what is wrong. > > Thanks! > Shaun > > 2009/7/22 Igor M. Liplianin <liplianin@xxxxx>: > > On 22 июля 2009 21:43:01 Shaun Murdoch wrote: > >> Hi, > >> > >> Thanks for the suggestion. > >> > >> I think there's something a bit weird with dvbtune. According to it's > >> man page the units for frequency (-f) are Hz. I am trying to tell it > >> 11.778 GHz - but you get errors if you do -f 11778000000. Equally you > >> also get errors if you assume it is MHz, i.e. -f 11778. Anyway, if > >> it prints FE_HAS_SIGNAL and FE_HAS_CARRIER that must mean the > >> frequency I gave it is OK? > >> > >> In any case, scan doesn't work, nor does Kaffeine, so I don't think > >> it's that my use of dvbtune is wrong. > >> > >> Anyone got any other suggestions on what I can do to get this to lock? > >> > >> Thanks, > >> Shaun > >> > >> 2009/7/22 Seyyed Mohammad mohammadzadeh <softnhard.es@xxxxxxxxx>: > >> > Hello, > >> > > >> > I don't know what is the exact cause of your problem but I think you > >> > are tuning to a wrong frequency. You wrote: > >> > > >> > dvbtune -f 1177800 -s 27500 -p v -m > >> > > >> > in which the frequency parameters has two extra zeros which cause the > >> > frequency to interpret as : 1,177,800 MHz !!!!!!! > >> > > >> > 2009/7/22 Shaun Murdoch <scrauny@xxxxxxxxx> > >> > > >> >> Hi everyone, > >> >> First post so please be gentle :-) > >> >> I was wondering if anyone can help me please - I am trying to get a > >> >> DVB-S PCI card working with Linux (Ubuntu 9.04). So far I can get the > >> >> card recognised by Linux, but it won't tune - Kaffeine does tell me > >> >> that there is 95% signal and 80% SNR, and I am using the same > >> >> frequencies etc that a standard Sky box uses. The card is very common > >> >> on eBay so I am sure there are plenty people who have tried this / > >> >> would want this working. Some details that I hope will help someone > >> >> who knows more than I do about this! The card is one of these: > >> >> http://cgi.ebay.co.uk/DVB-S-Satellite-TV-Tuner-Video-Capture-PCI-Card > >> >>-Re > >> >> mote_W0QQitemZ130314645048QQcmdZViewItemQQptZUK_Computing_Computer_Co > >> >>mpon > >> >> ents_Graphics_Video_TV_Cards_TW?hash=item1e575bae38&_trksid=p3286.c0. > >> >>m14& _trkparms=65:12|66:2|39:1|72:1690|293:1|294:50 lspci: > >> >> 03:09.0 Ethernet controller: Device 195d:1105 (rev 10) > >> >> My dmesg output - looks ok?: > >> >> > >> >> $ dmesg | grep DVB > >> >> [ 12.174738] DVB: registering new adapter (dm1105) > >> >> [ 12.839501] DVB: registering adapter 0 frontend 0 (ST STV0299 > >> >> DVB-S)... [ 12.839633] input: DVB on-card IR receiver as > >> >> /devices/pci0000:00/0000:00:1e.0/0000:03:09.0/input/input > >> >> > >> >> My output from scan - the problem: > >> >> > >> >> $ sudo scan -vvvvvv /usr/share/dvb/dvb-s/Astra-28.2E > >> >> scanning /usr/share/dvb/dvb-s/Astra-28.2E > >> >> using '/dev/dvb/adapter0/frontend0' and '/dev/dvb/adapter0/demux0' > >> >> > >> >> >>> tune to: 11778:v:0:27500 > >> >> > >> >> DiSEqC: switch pos 0, 13V, hiband (index 2) > >> >> diseqc_send_msg:56: DiSEqC: e0 10 38 f1 00 00 > >> >> DVB-S IF freq is 1178000 > >> >> > >> >> >>> tuning status == 0x03 > >> >> >>> tuning status == 0x03 > >> >> >>> tuning status == 0x03 > >> >> >>> tuning status == 0x03 > >> >> >>> tuning status == 0x03 > >> >> >>> tuning status == 0x03 > >> >> >>> tuning status == 0x03 > >> >> >>> tuning status == 0x03 > >> >> >>> tuning status == 0x03 > >> >> >>> tuning status == 0x03 > >> >> > >> >> WARNING: >>> tuning failed!!! > >> >> > >> >> This is the correct satellite for my location (south UK), I believe. > >> >> Have tried plenty. Nothing locks. I'm using the latest liplianin > >> >> drivers - did a mercurial checkout and build today: > >> >> > >> >> $ modinfo dm1105 > >> >> filename: > >> >> /lib/modules/2.6.28-13-server/kernel/drivers/media/dvb/dm1105/dm1105. > >> >>ko license: GPL > >> >> description: SDMC DM1105 DVB driver > >> >> author: Igor M. Liplianin <liplianin@xxxxx> > >> >> srcversion: 46C1B3C3627D1937F75D732 > >> >> alias: pci:v0000195Dd00001105sv*sd*bc*sc*i* > >> >> alias: pci:v0000109Fd0000036Fsv*sd*bc*sc*i* > >> >> depends: ir-common,dvb-core > >> >> vermagic: 2.6.28-13-server SMP mod_unload modversions > >> >> parm: card:card type (array of int) > >> >> parm: ir_debug:enable debugging information for IR decoding > >> >> (int) parm: adapter_nr:DVB adapter numbers (array of short) > >> >> > >> >> Have also tried the latest v4l-dvb drivers and get exactly the same > >> >> tuning problems. Finally, dvbtune appears to say I have signal but > >> >> cannot lock: > >> >> > >> >> $ sudo dvbtune -f 1177800 -s 27500 -p v -m -tone 1 -vvvvvvvvvvv > >> >> [sudo] password for shaun: > >> >> Using DVB card "ST STV0299 DVB-S" > >> >> tuning DVB-S to L-Band:0, Pol:V Srate=27500000, 22kHz=on > >> >> polling.... > >> >> Getting frontend event > >> >> FE_STATUS: > >> >> polling.... > >> >> Getting frontend event > >> >> FE_STATUS: FE_HAS_SIGNAL FE_HAS_CARRIER FE_HAS_VITERBI > >> >> polling.... > >> >> Getting frontend event > >> >> FE_STATUS: FE_HAS_SIGNAL FE_HAS_CARRIER > >> >> polling.... > >> >> Getting frontend event > >> >> FE_STATUS: FE_HAS_SIGNAL FE_HAS_CARRIER FE_HAS_VITERBI > >> >> polling.... > >> >> Getting frontend event > >> >> FE_STATUS: FE_HAS_SIGNAL FE_HAS_CARRIER > >> >> polling.... > >> >> Getting frontend event > >> >> FE_STATUS: FE_HAS_SIGNAL FE_HAS_CARRIER FE_HAS_VITERBI > >> >> polling.... > >> >> Getting frontend event > >> >> FE_STATUS: FE_HAS_SIGNAL FE_HAS_CARRIER > >> >> > >> >> So I am thinking that this could be a driver issue? If the card has > >> >> good signal and SNR in Kaffeine, and dvbtune says it has signal and > >> >> carrier - but cannot lock? Please can someone help me debug this? > >> >> Thanks a lot! > >> >> Shaun > >> >> > >> >> > >> >> > >> >> > >> >> > >> >> > >> >> > >> >> _______________________________________________ > >> >> linux-dvb users mailing list > >> >> For V4L/DVB development, please use instead > >> >> linux-media@xxxxxxxxxxxxxxx linux-dvb@xxxxxxxxxxx > >> >> http://www.linuxtv.org/cgi-bin/mailman/listinfo/linux-dvb > >> > > >> > -- > >> > To unsubscribe from this list: send the line "unsubscribe linux-media" > >> > in the body of a message to majordomo@xxxxxxxxxxxxxxx > >> > More majordomo info at http://vger.kernel.org/majordomo-info.html > >> > >> -- > >> To unsubscribe from this list: send the line "unsubscribe linux-media" > >> in the body of a message to majordomo@xxxxxxxxxxxxxxx > >> More majordomo info at http://vger.kernel.org/majordomo-info.html > > > > Hi Shaun, > > Did you read something on tuner can? > > Or maybe you take a picture of tuner can without cover. > > Also close look picture of card would be nice. > > Though definately demod is stv0299, but tuner chip may be different. > > I suspect it is stb6000, but such combination(stb6000 + stv0299) not > > supported in the driver now. Anyway, you can try modprobe dm1105 with > > parameter card=1 from s2-liplianin tree. > > > > Igor -- Igor M. Liplianin Microsoft Windows Free Zone - Linux used for all Computing Tasks -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
