On Sat, Jul 25, 2009 at 04:44:27PM +0200, ext Hans Verkuil wrote: > On Saturday 25 July 2009 16:23:51 Eduardo Valentin wrote: > > On Sat, Jul 25, 2009 at 04:08:01PM +0200, Valentin Eduardo (Nokia-D/Helsinki) wrote: > > > On Sat, Jul 25, 2009 at 04:10:53PM +0200, ext Hans Verkuil wrote: > > > > On Friday 24 July 2009 18:42:12 Eduardo Valentin wrote: > > > > > As there can be modulator devices with get/set frequency > > > > > callbacks, this patch adds support to them in v4l2-ctl utility. > > > > > > > > Thanks for this patch. > > > > > > > > I've implemented it somewhat differently (using the new V4L2_CAP_MODULATOR > > > > to decide whether to call G_TUNER or G_MODULATOR) and pushed it to my > > > > v4l-dvb-strctrl tree. I've also improved the string print function so things > > > > like newlines and carriage returns are printed as \r and \n. > > > > > > > > Can you mail me the output of 'v4l2-ctl --all -L' based on this updated > > > > version of v4l2-ctl? I'd like to check whether everything is now reported > > > > correctly. > > > > > > Yes sure. But there is also the RDS output for txsubchannel. This is missing > > > now for G_MODULATOR. RDS is also missing in S_MODULATOR. S_MODULATOR is also > > > confusing to me. The strings can be set only with one value? I though I could > > > do something like: > > > > > > v4l2-ctl -d /dev/radio0 --set-modulator=rds,stereo > > > > Here is an output with you new version: > > / # v4l2-ctl -d /dev/radio0 --all -L > > Driver Info: > > Driver name : radio-si4713 > > Card type : Silicon Labs Si4713 Modulator > > Bus info : > > Driver version: 0 > > Capabilities : 0x00080800 > > RDS Output > > Modulator > > Audio output: 0 (FM Modulator Audio Out) > > Frequency: 1408000 (88.000000 MHz) > > Video Standard = 0x00000000 > > Modulator: > > Name : FM Modulator > > Capabilities : 62.5 Hz stereo rds > > Frequency range : 76.0 MHz - 108.0 MHz > > Subchannel modulation: stereo+rds > > > > User Controls > > > > mute (bool) : default=1 value=0 > > > > FM Radio Modulator Controls > > > > rds_program_id (int) : min=0 max=65535 step=1 default=0 value=0 > > rds_program_type (int) : min=0 max=31 step=1 default=0 value=0 > > rds_signal_deviation (int) : min=0 max=90000 step=10 default=200 value=200 flags=slider > > rds_ps_name (str) : min=0 max=97 value='Si4713 ' len=97 > > rds_radio_text (str) : min=0 max=385 value='Si4713 \r' len=385 > > audio_limiter_feature_enabled (bool) : default=1 value=1 > > audio_limiter_release_time (int) : min=250 max=102390 step=50 default=5010 value=5010 flags=slider > > audio_limiter_deviation (int) : min=0 max=90000 step=10 default=66250 value=66250 flags=slider > > audio_compression_feature_enabl (bool) : default=1 value=1 > > audio_compression_gain (int) : min=0 max=20 step=1 default=15 value=15 flags=slider > > audio_compression_threshold (int) : min=-40 max=0 step=1 default=-40 value=-40 flags=slider > > audio_compression_attack_time (int) : min=0 max=5000 step=500 default=0 value=0 flags=slider > > audio_compression_release_time (int) : min=100000 max=1000000 step=100000 default=1000000 value=1000000 flags=slider > > pilot_tone_feature_enabled (bool) : default=1 value=1 > > pilot_tone_deviation (int) : min=0 max=90000 step=10 default=6750 value=6750 flags=slider > > pilot_tone_frequency (int) : min=0 max=19000 step=1 default=19000 value=19000 flags=slider > > pre_emphasis_settings (menu) : min=0 max=2 default=1 value=1 > > tune_power_level (int) : min=0 max=120 step=1 default=88 value=88 flags=slider > > tune_antenna_capacitor (int) : min=0 max=191 step=1 default=0 value=109 flags=slider > > > > So far so good for G_MODULATOR and for String with escaped characters. > > I also tried S_MODULATOR. Looks good but there is a bug: > > else if (!strcmp(optarg, "stereo-rds")) > > txsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_RDS; > > else if (!strcmp(optarg, "mono-rds")) > > txsubchans = V4L2_TUNER_SUB_MONO | V4L2_TUNER_SUB_RDS; > > > > As you can see, you cannot properly set stereo-rds, it will keep it mono. Otherwise it is fine to me. > > Oops, fixed. I've also removed the 'len=' part for strings since that does not > add anything useful. Right. I will update si4713.txt file with latest output and send with v11. > > Hans > > -- > Hans Verkuil - video4linux developer - sponsored by TANDBERG Telecom > -- > To unsubscribe from this list: send the line "unsubscribe linux-media" in > the body of a message to majordomo@xxxxxxxxxxxxxxx > More majordomo info at http://vger.kernel.org/majordomo-info.html -- Eduardo Valentin -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
