Attached is the dmesg output of the patch.
--- On Sun, 7/19/09, Krzysztof Halasa <khc@xxxxxxxxx> wrote:
> > Have a tv tuner believe to be sinovideo 1300, and the
> remote has h-338 in the
> > back, the tuner is detected as saa7134 proteus 2309,
> and working fine, the
> > patch is for the remote.
>
> Since we don't know what exact encoding does it use... Can
> you test with
> the attached patch? You have to add/substitute your card ID
> in place of
> AVERMEDIA_SUPER_007 and "modprobe saa7134
> gpio_tracking=1".
>
> Press a single RC button.
>
> It should produce a lot of messages like:
> $ dmesg | grep GPIO:
> saa7133[0] GPIO: time=1248041038.165525 mode=0x0000000
> in=0x0040000 out=0x0000000 [pre-init]
> saa7133[0] GPIO: time=1248041061.000769 mode=0x0200000
> in=0x0000000 out=0x0200000 [GPIO18 IRQ]
> saa7133[0] GPIO: time=1248041061.001691 mode=0x0200000
> in=0x0040000 out=0x0200000 [GPIO18 IRQ]
> saa7133[0] GPIO: time=1248041061.002539 mode=0x0200000
> in=0x0000000 out=0x0200000 [GPIO18 IRQ]
> saa7133[0] GPIO: time=1248041061.004376 mode=0x0200000
> in=0x0040000 out=0x0200000 [GPIO18 IRQ]
> saa7133[0] GPIO: time=1248041061.005198 mode=0x0200000
> in=0x0000000 out=0x0200000 [GPIO18 IRQ]
> saa7133[0] GPIO: time=1248041061.006124 mode=0x0200000
> in=0x0040000 out=0x0200000 [GPIO18 IRQ]
> saa7133[0] GPIO: time=1248041061.007858 mode=0x0200000
> in=0x0000000 out=0x0200000 [GPIO18 IRQ]
> saa7133[0] GPIO: time=1248041061.009672 mode=0x0200000
> in=0x0040000 out=0x0200000 [GPIO18 IRQ]
>
> If you send all of that to me I should be able to figure
> out the code used.
> --
> Krzysztof Halasa
Attachment:
gpio_tracking
Description: Binary data
