Re: [PULL] http://www.linuxtv.org/hg/~hverkuil/v4l-dvb-dm646x

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Em Fri, 26 Jun 2009 21:01:50 +0200
Hans Verkuil <hverkuil@xxxxxxxxx> escreveu:

> Hi Mauro,
> 
> Please pull from http://www.linuxtv.org/hg/~hverkuil/v4l-dvb-dm646x for the following:
> 
> - ARM: DaVinci: DM646x Video: VPIF driver
> - ARM: DaVinci: DM646x Video: Add VPIF display driver
> - ARM: DaVinci: DM646x Video: Makefile and config files modifications for Display
> - ARM: DaVinci: DM646x Video: Fix compile time warnings for mutex locking
> 
> Note that these four patches depend on the attached platform patch that
> should be applied to the git tree first.
> 
> If possible, it would be great if this (like the vpfe capture driver) can be
> merged for 2.6.31.

Hmm... I'm not seeing Russel ack on the arch/arm patch. Russel, could you
please review the enclosed patch? Would this be ok for 2.6.31?

Cheers,
Mauro.

---

[PATCH] ARM: DaVinci: DM646x Video: Platform and board specific setup
From: Chaithrika U S <chaithrika@xxxxxx>

Platform specific display device setup for DM646x EVM

Add platform device and resource structures. Also define a platform specific
clock setup function that can be accessed by the driver to configure the clock
and CPLD.

Signed-off-by: Chaithrika U S <chaithrika@xxxxxx>
Signed-off-by: Manjunath Hadli <mrh@xxxxxx>
Signed-off-by: Brijesh Jadav <brijesh.j@xxxxxx>
Signed-off-by: Kevin Hilman <khilman@xxxxxxxxxxxxxxxxxxx>

 arch/arm/mach-davinci/board-dm646x-evm.c    |  122 +++++++++++++++++++++++++++
 arch/arm/mach-davinci/dm646x.c              |   62 ++++++++++++++
 arch/arm/mach-davinci/include/mach/dm646x.h |   24 +++++
 3 files changed, 208 insertions(+), 0 deletions(-)

diff --git a/arch/arm/mach-davinci/board-dm646x-evm.c b/arch/arm/mach-davinci/board-dm646x-evm.c
index e17de63..eb4bd01 100644
--- a/arch/arm/mach-davinci/board-dm646x-evm.c
+++ b/arch/arm/mach-davinci/board-dm646x-evm.c
@@ -52,6 +52,19 @@
 #define DM646X_EVM_PHY_MASK		(0x2)
 #define DM646X_EVM_MDIO_FREQUENCY	(2200000) /* PHY bus frequency */
 
+#define VIDCLKCTL_OFFSET	(0x38)
+#define VSCLKDIS_OFFSET		(0x6c)
+
+#define VCH2CLK_MASK		(BIT_MASK(10) | BIT_MASK(9) | BIT_MASK(8))
+#define VCH2CLK_SYSCLK8		(BIT(9))
+#define VCH2CLK_AUXCLK		(BIT(9) | BIT(8))
+#define VCH3CLK_MASK		(BIT_MASK(14) | BIT_MASK(13) | BIT_MASK(12))
+#define VCH3CLK_SYSCLK8		(BIT(13))
+#define VCH3CLK_AUXCLK		(BIT(14) | BIT(13))
+
+#define VIDCH2CLK		(BIT(10))
+#define VIDCH3CLK		(BIT(11))
+
 static struct davinci_uart_config uart_config __initdata = {
 	.enabled_uarts = (1 << 0),
 };
@@ -207,6 +220,40 @@ static struct at24_platform_data eeprom_info = {
 	.context	= (void *)0x7f00,
 };
 
+static struct i2c_client *cpld_client;
+
+static int cpld_video_probe(struct i2c_client *client,
+			const struct i2c_device_id *id)
+{
+	cpld_client = client;
+	return 0;
+}
+
+static int __devexit cpld_video_remove(struct i2c_client *client)
+{
+	cpld_client = NULL;
+	return 0;
+}
+
+static const struct i2c_device_id cpld_video_id[] = {
+	{ "cpld_video", 0 },
+	{ }
+};
+
+static struct i2c_driver cpld_video_driver = {
+	.driver = {
+		.name	= "cpld_video",
+	},
+	.probe		= cpld_video_probe,
+	.remove		= cpld_video_remove,
+	.id_table	= cpld_video_id,
+};
+
+static void evm_init_cpld(void)
+{
+	i2c_add_driver(&cpld_video_driver);
+}
+
 static struct i2c_board_info __initdata i2c_info[] =  {
 	{
 		I2C_BOARD_INFO("24c256", 0x50),
@@ -216,6 +263,9 @@ static struct i2c_board_info __initdata i2c_info[] =  {
 		I2C_BOARD_INFO("pcf8574a", 0x38),
 		.platform_data	= &pcf_data,
 	},
+	{
+		I2C_BOARD_INFO("cpld_video", 0x3B),
+	},
 };
 
 static struct davinci_i2c_platform_data i2c_pdata = {
@@ -223,10 +273,81 @@ static struct davinci_i2c_platform_data i2c_pdata = {
 	.bus_delay      = 0 /* usec */,
 };
 
+static int set_vpif_clock(int mux_mode, int hd)
+{
+	int val = 0;
+	int err = 0;
+	unsigned int value;
+	void __iomem *base = IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE);
+
+	/* disable the clock */
+	value = __raw_readl(base + VSCLKDIS_OFFSET);
+	value |= (VIDCH3CLK | VIDCH2CLK);
+	__raw_writel(value, base + VSCLKDIS_OFFSET);
+
+	val = i2c_smbus_read_byte(cpld_client);
+	if (val < 0)
+		return val;
+
+	if (mux_mode == 1)
+		val &= ~0x40;
+	else
+		val |= 0x40;
+
+	err = i2c_smbus_write_byte(cpld_client, val);
+	if (err)
+		return err;
+
+	value = __raw_readl(base + VIDCLKCTL_OFFSET);
+	value &= ~(VCH2CLK_MASK);
+	value &= ~(VCH3CLK_MASK);
+
+	if (hd >= 1)
+		value |= (VCH2CLK_SYSCLK8 | VCH3CLK_SYSCLK8);
+	else
+		value |= (VCH2CLK_AUXCLK | VCH3CLK_AUXCLK);
+
+	__raw_writel(value, base + VIDCLKCTL_OFFSET);
+
+	/* enable the clock */
+	value = __raw_readl(base + VSCLKDIS_OFFSET);
+	value &= ~(VIDCH3CLK | VIDCH2CLK);
+	__raw_writel(value, base + VSCLKDIS_OFFSET);
+
+	return 0;
+}
+
+static const struct subdev_info dm646x_vpif_subdev[] = {
+	{
+		.addr	= 0x2A,
+		.name	= "adv7343",
+	},
+	{
+		.addr	= 0x2C,
+		.name	= "ths7303",
+	},
+};
+
+static const char *output[] = {
+	"Composite",
+	"Component",
+	"S-Video",
+};
+
+static struct vpif_config dm646x_vpif_config = {
+	.set_clock	= set_vpif_clock,
+	.subdevinfo	= dm646x_vpif_subdev,
+	.subdev_count	= ARRAY_SIZE(dm646x_vpif_subdev),
+	.output		= output,
+	.output_count	= ARRAY_SIZE(output),
+	.card_name	= "DM646x EVM",
+};
+
 static void __init evm_init_i2c(void)
 {
 	davinci_init_i2c(&i2c_pdata);
 	i2c_register_board_info(1, i2c_info, ARRAY_SIZE(i2c_info));
+	evm_init_cpld();
 }
 
 static void __init davinci_map_io(void)
@@ -243,6 +364,7 @@ static __init void evm_init(void)
 
 	soc_info->emac_pdata->phy_mask = DM646X_EVM_PHY_MASK;
 	soc_info->emac_pdata->mdio_max_freq = DM646X_EVM_MDIO_FREQUENCY;
+	dm646x_setup_vpif(&dm646x_vpif_config);
 }
 
 static __init void davinci_dm646x_evm_irq_init(void)
diff --git a/arch/arm/mach-davinci/dm646x.c b/arch/arm/mach-davinci/dm646x.c
index 64a291f..50dba53 100644
--- a/arch/arm/mach-davinci/dm646x.c
+++ b/arch/arm/mach-davinci/dm646x.c
@@ -31,6 +31,15 @@
 #include "clock.h"
 #include "mux.h"
 
+#define DAVINCI_VPIF_BASE       (0x01C12000)
+#define VDD3P3V_PWDN_OFFSET	(0x48)
+#define VSCLKDIS_OFFSET		(0x6C)
+
+#define VDD3P3V_VID_MASK	(BIT_MASK(7) | BIT_MASK(6) | BIT_MASK(5) |\
+					BIT_MASK(4))
+#define VSCLKDIS_MASK		(BIT_MASK(11) | BIT_MASK(10) | BIT_MASK(9) |\
+					BIT_MASK(8))
+
 /*
  * Device specific clocks
  */
@@ -587,6 +596,37 @@ static struct platform_device dm646x_edma_device = {
 	.resource		= edma_resources,
 };
 
+static u64 vpif_dma_mask = DMA_BIT_MASK(32);
+
+static struct resource vpif_resource[] = {
+	{
+		.start	= DAVINCI_VPIF_BASE,
+		.end	= DAVINCI_VPIF_BASE + 0x03fff,
+		.flags	= IORESOURCE_MEM,
+	},
+	{
+		.start = IRQ_DM646X_VP_VERTINT2,
+		.end   = IRQ_DM646X_VP_VERTINT2,
+		.flags = IORESOURCE_IRQ,
+	},
+	{
+		.start = IRQ_DM646X_VP_VERTINT3,
+		.end   = IRQ_DM646X_VP_VERTINT3,
+		.flags = IORESOURCE_IRQ,
+	},
+};
+
+static struct platform_device vpif_display_dev = {
+	.name		= "vpif_display",
+	.id		= -1,
+	.dev		= {
+			.dma_mask 		= &vpif_dma_mask,
+			.coherent_dma_mask	= DMA_32BIT_MASK,
+	},
+	.resource	= vpif_resource,
+	.num_resources	= ARRAY_SIZE(vpif_resource),
+};
+
 /*----------------------------------------------------------------------*/
 
 static struct map_desc dm646x_io_desc[] = {
@@ -696,6 +736,28 @@ static struct davinci_soc_info davinci_soc_info_dm646x = {
 	.sram_len		= SZ_32K,
 };
 
+void dm646x_setup_vpif(struct vpif_config *config)
+{
+	unsigned int value;
+	void __iomem *base = IO_ADDRESS(DAVINCI_SYSTEM_MODULE_BASE);
+
+	value = __raw_readl(base + VSCLKDIS_OFFSET);
+	value &= ~VSCLKDIS_MASK;
+	__raw_writel(value, base + VSCLKDIS_OFFSET);
+
+	value = __raw_readl(base + VDD3P3V_PWDN_OFFSET);
+	value &= ~VDD3P3V_VID_MASK;
+	__raw_writel(value, base + VDD3P3V_PWDN_OFFSET);
+
+	davinci_cfg_reg(DM646X_STSOMUX_DISABLE);
+	davinci_cfg_reg(DM646X_STSIMUX_DISABLE);
+	davinci_cfg_reg(DM646X_PTSOMUX_DISABLE);
+	davinci_cfg_reg(DM646X_PTSIMUX_DISABLE);
+
+	vpif_display_dev.dev.platform_data = config;
+	platform_device_register(&vpif_display_dev);
+}
+
 void __init dm646x_init(void)
 {
 	davinci_common_init(&davinci_soc_info_dm646x);
diff --git a/arch/arm/mach-davinci/include/mach/dm646x.h b/arch/arm/mach-davinci/include/mach/dm646x.h
index 1fc764c..7409b6d 100644
--- a/arch/arm/mach-davinci/include/mach/dm646x.h
+++ b/arch/arm/mach-davinci/include/mach/dm646x.h
@@ -23,4 +23,28 @@
 
 void __init dm646x_init(void);
 
+void dm646x_video_init(void);
+
+struct vpif_output {
+	u16 id;
+	const char *name;
+};
+
+struct subdev_info {
+	unsigned short addr;
+	const char *name;
+};
+
+struct vpif_config {
+	int (*set_clock)(int, int);
+	const struct subdev_info *subdevinfo;
+	int subdev_count;
+	const char **output;
+	int output_count;
+	const char *card_name;
+};
+
+
+void dm646x_setup_vpif(struct vpif_config *config);
+
 #endif /* __ASM_ARCH_DM646X_H */




Cheers,
Mauro
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux