On 4 Jul, hermann pitton wrote: > > Hello, > > Am Samstag, den 04.07.2009, 15:16 +0200 schrieb eric.paturage@xxxxxxxxx: >> hello >> >> I had my Pinnacle PCTV 50i analog tv card working quite well for several years >> with linux . but since mid june it can not tune anymore when using the latest mercurial version >> of the v4l2 drivers . >> It is working fine up to the official V4l2 driver of 2.6.30 . >> >> >> here is an example of /var/log/messages with official v4l2 drivers of 2.6.27.4 (working well) : > > [snip] >> saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff >> TUNER: Unable to find symbol tda829x_probe() > ..^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^^ > >> tuner 1-004b: chip found @ 0x96 (saa7133[0]) >> DVB: Unable to find symbol tda9887_attach() >> saa7133[0]: registered device video0 [v4l2] >> saa7133[0]: registered device vbi0 >> saa7133[0]: registered device radio0 >> saa7134 ALSA driver for DMA sound loaded >> IRQ 11/saa7133[0]: IRQF_DISABLED is not guaranteed on shared IRQs >> saa7133[0]/alsa: saa7133[0] at 0xed800000 irq 11 registered as card -1 >> >> Jul 2 09:12:43 neptune kernel: tuner 1-004b: Tuner has no way to set tv freq >> Jul 2 09:19:14 neptune kernel: tuner 1-004b: Tuner has no way to set tv freq >> Jul 2 09:20:16 neptune kernel: tuner 1-004b: Tuner has no way to set tv freq >> Jul 2 09:20:26 neptune kernel: tuner 1-004b: Tuner has no way to set tv freq >> >> >> >> any idea what is going on ? > > out of some reason you don't have the tda8290 analog IF demodulator > module. > > In theory this should be only possible, if you have selected > "Customize analog and hybrid tuner modules to build" and deselected > "TDA 8290/8295 + 8275(a)/18271 tuner combo". > > I'm writing from a 2.6.29 and don't have such problems, but what makes > me wonder is, that you also don't have the tda9887. You don't need it > for that card, but I can't even deselect it at all. > > With deselected tda8290 it gets loaded here instead, since within the > same address range. > > Can you check with make xconfig/menuconfig, if the tda8290 is selected > on your build and watch if it is compiled at the beginning of "make"? > > Cheers, > Hermann > Hi Hermann i checked the xconfig menu , I unselected "Customize analog and hybrid tuner modules to build" (just to be sure) the module tda8290.ko gets built and installed (i double checked ) . [root@neptune / ]# cd /lib/modules/2.6.29.4 [root@neptune 2.6.29.4]# find . -name "tda829*" ./kernel/drivers/media/common/tuners/tda8290.ko [root@neptune 2.6.29.4]# uname -a Linux neptune.localwarp.net 2.6.29.4 #1 Mon Jun 1 11:01:38 CEST 2009 i686 AMD Athlon(tm) Processor unknown GNU/Linux [root@neptune 2.6.29.4]# find . -name "tda829*" -ls 36948 16 -rw-r--r-- 1 root root 15908 Jul 4 19:44 ./kernel/drivers/media/common/tuners/tda8290.ko but it does not get loaded automatically . I tried to load it manualy with modprobe , but, even with that module loaded i still get : tuner 1-004b: Tuner has no way to set tv freq tuner 1-004b: Tuner has no way to set tv freq tuner 1-004b: Tuner has no way to set tv freq cheers , -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
