On Thursday 02 July 2009 22:32:38 m-karicheri2@xxxxxx wrote:
> From: Muralidharan Karicheri <m-karicheri2@xxxxxx>
>
> Re-sending to add description (and also experimental status) for
> VPFE_CMD_S_CCDC_RAW_PARAMS and updating debug prints with \n and
> fixing an error coder ENOMEM
>
> VPFE Capture bridge driver
>
> This is version, v3 of vpfe capture bridge driver for doing video
> capture on DM355 and DM6446 evms. The ccdc hw modules register with the
> driver and are used for configuring the CCD Controller for a specific
> decoder interface. The driver also registers the sub devices required
> for a specific evm. More than one sub devices can be registered.
> This allows driver to switch dynamically to capture video from
> any sub device that is registered. Currently only one sub device
> (tvp5146) is supported. But in future this driver is expected
> to do capture from sensor devices such as Micron's MT9T001,MT9T031
> and MT9P031 etc. The driver currently supports MMAP based IO.
>
> Following are the updates based on review comments:-
> 1) clean up of setting bus parameters in ccdc
> 2) removed v4l2_routing structure type
> 3) module authors, description changes
> 4) pixel aspect constants removed
>
> Reviewed by: Hans Verkuil <hverkuil@xxxxxxxxx>
> Reviewed by: Laurent Pinchart <laurent.pinchart@xxxxxxxxx>
> Reviewed by: Alexey Klimov <klimov.linux@xxxxxxxxx>
> Reviewed by: Mauro Carvalho Chehab <mchehab@xxxxxxxxxxxxx>
>
> Signed-off-by: Muralidharan Karicheri <m-karicheri2@xxxxxx>
> ---
> Applies to v4l-dvb repository
>
> drivers/media/video/davinci/vpfe_capture.c | 2138 ++++++++++++++++++++++++++++
> include/media/davinci/vpfe_capture.h | 195 +++
> include/media/davinci/vpfe_types.h | 51 +
> 3 files changed, 2384 insertions(+), 0 deletions(-)
> create mode 100644 drivers/media/video/davinci/vpfe_capture.c
> create mode 100644 include/media/davinci/vpfe_capture.h
> create mode 100644 include/media/davinci/vpfe_types.h
>
> diff --git a/drivers/media/video/davinci/vpfe_capture.c b/drivers/media/video/davinci/vpfe_capture.c
> new file mode 100644
> index 0000000..600da0d
> --- /dev/null
> +++ b/drivers/media/video/davinci/vpfe_capture.c
<snip>
> +/*
> + * vpfe_probe : This function creates device entries by register
> + * itself to the V4L2 driver and initializes fields of each
> + * device objects
> + */
> +static __init int vpfe_probe(struct platform_device *pdev)
> +{
> + struct vpfe_config *vpfe_cfg;
> + struct resource *res1;
> + struct vpfe_device *vpfe_dev;
> + struct i2c_adapter *i2c_adap;
> + struct i2c_client *client;
> + struct video_device *vfd;
> + int ret = -ENOMEM, i, j;
> + int num_subdevs = 0;
<snip>
> +
> + for (i = 0; i < num_subdevs; i++) {
> + struct vpfe_subdev_info *sdinfo = &vpfe_cfg->sub_devs[i];
> + struct v4l2_input *inps;
> +
> + list_for_each_entry(client, &i2c_adap->clients, list) {
> + if (!strcmp(client->name, sdinfo->name))
> + break;
> + }
This no longer compiles :-(
The latest linux git tree no longer has the i2c_adap->clients field, nor is
there a 'list' field in struct i2c_client.
The initialization of the subdevs should be done in a similar way as
vpif_probe does it in vpif_display.c (see my v4l-dvb-dm646x tree).
Using i2c core internals as is being done here is a really bad idea.
Of course, when this was written originally the v4l2_i2c_new_subdev_board()
function didn't exist yet, and you need that one in order to implement this
properly.
I've made a new v4l-dvb-vpfe-cap tree with your latest changes, but it is
obviously impossible to merge at the moment and fixing this problem is, I
suspect, a non-trivial change.
I see three options:
1) You manage to come up with a proper fix very quickly,
2) We postpone everything until the next merge window,
3) We only merge the tvp514x patches (not sure whether this is a useful
alternative or not).
Mauro, the v4l-dvb-dm646x tree for which I posted a pull request a week ago
compiles fine against the latest linux-git tree, so it shouldn't be a problem
(I hope :-) ) to merge that one for 2.6.31.
Regards,
Hans
--
Hans Verkuil - video4linux developer - sponsored by TANDBERG Telecom
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
