Hi, Am Dienstag, den 23.06.2009, 03:02 +0100 schrieb Another Sillyname: > I noted from a discussion in the list back in April there were > problems with SAA7133 devices under 2.6.29 Kernel. > > I have such a device and just upgraded to Fed 11 yesterday, device now > fails. Under Fed 10 no problems. > > I'm happy to provide dmesg and lspci and whatever else you need, > however don't want to clutter the list with data that may not be > needed. > > The device in question is a 5168:3307 Lifeview Hybrid and I'm getting > the "IRQF_Disabled" error previously described. > > Any ideas chaps? > > Thanks in Advance thanks for your report! We tried to track it down, but there was no good/bad on mercurial to start on for me and kernel git stuff is pretty well off on any of it too. As far I can say it is not related to that "IRQF Disabled" stuff, but that seems to be a cruft anyway and I can't tell what finally all might come out of it. Currently I believe (my!) that it only happens with multiple saa7134 driver devices. Likely you are another proof for, that this is not the case. Please provide related "dmesg" output. If you are in the same boat, only known current cure is to try a 2.6.30 or faall back on a 2.6.28. (Likely even more in that soup) That is of course all still very unplesant (: Cheers, Hermann -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
