> -----Original Message----- > From: Menon, Nishanth > Sent: Monday, June 22, 2009 9:50 AM > To: Aguirre Rodriguez, Sergio Alberto; Dongsoo Kim > Cc: Tuukka.O Toivonen; Sakari Ailus; linux-media@xxxxxxxxxxxxxxx; > Hiremath, Vaibhav; Koskipaa Antti (Nokia-D/Helsinki); Cohen David.A > (Nokia-D/Helsinki); Alexey Klimov; gary@xxxxxxxxxxxx > Subject: RE: OMAP3 ISP and camera drivers (update 2) > > > -----Original Message----- > > From: linux-media-owner@xxxxxxxxxxxxxxx [mailto:linux-media- > > owner@xxxxxxxxxxxxxxx] On Behalf Of Aguirre Rodriguez, Sergio Alberto > > Sent: Monday, June 22, 2009 5:22 PM > > > Thank you Sergio. So you mean that I can buy OMAP Zoom target board > > > with MT or OV sensor on it sooner or later? cool! > > > > AFAIK, when you buy the Zoom Target platform, you can only have OV3640 > > sensor. BUT you could hack the board to include another sensor (Maybe > > consulting Logic people could clarify this). > > > > In Zoom1, I'll be able just to test the OV3640 sensor, which is the one > I > > have available here. > > > > On 3430SDP, is where I do have MT9P012 sensor (5MP RAW sensor) connected > > in parallel, and an OV3640 (Smart sensor, but driver is using it as RAW > > sensor currently only) in CSI2 interface. > > > > Curious: Thought we had two sensors: OV3640[1] on zoom1 and a 8MP sensor > on zoom2[2] -> am I wrong in saying that the connectors are compatible > since both are CSI2[3]? You're not wrong. The connectors are compatible, it'll be a matter of the driver part located in board specific code to request the necessary datalanes for the transmission to be done adequately. But both should follow CSI2 standard spec. > > SDP3430[4] supports MT9p012(CPI) and ov3640(CSI2).. as long as someone can > put a sensor with the right connectors and voltage checks, they should be > "plug and play" - at least from a h/w perspective ;) Yes, that's correct. Only proper sensor driver will be required of course... > > Regards, > Nishanth Menon > Ref: > [1] http://www.ovt.com/products/part_detail.php?id=26 > [2] > https://www.omapzoom.org/gf/project/omapzoom/wiki/?pagename=WhatIsZoom2 > [3] > https://www.omapzoom.com/gf/project/omapandroid/mailman/?_forum_action=For > umMessageBrowse&thread_id=1912&action=ListThreads&mailman_id=22 > [4] > http://focus.ti.com/general/docs/wtbu/wtbugencontent.tsp?templateId=6123&n > avigationId=12013&contentId=28741#sdp -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
