Thank you so much, everyone who has replied to my question! It's nice to find a community of people willing to help. Here is the dmesg output that appears when the Pinnacle device gets plugged in, along with a few "ls" commands: * usb 1-1: new high speed USB device using ehci_hcd and address 2 * usb 1-1: configuration #1 chosen from 1 choice * Linux video capture interface: v2.00 * em28xx: New device Pinnacle Systems PCTV 800e @ 480 Mbps (2304:0227, interface 0, class 0) * em28xx #0: Identified as Pinnacle PCTV HD Pro Stick (card=17) * em28xx #0: chip ID is em2882/em2883 * em28xx #0: i2c eeprom 00: 1a eb 67 95 04 23 27 02 d0 12 5c 03 8e 16 a4 1c * em28xx #0: i2c eeprom 10: 6a 24 27 57 46 07 01 00 00 00 00 00 00 00 00 00 * em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 02 00 b8 00 00 00 5b 1c 00 00 * em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 01 01 00 00 00 00 00 00 * em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 * em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 * em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 24 03 50 00 69 00 * em28xx #0: i2c eeprom 70: 6e 00 6e 00 61 00 63 00 6c 00 65 00 20 00 53 00 * em28xx #0: i2c eeprom 80: 79 00 73 00 74 00 65 00 6d 00 73 00 00 00 16 03 * em28xx #0: i2c eeprom 90: 50 00 43 00 54 00 56 00 20 00 38 00 30 00 30 00 * em28xx #0: i2c eeprom a0: 65 00 00 00 1c 03 30 00 36 00 31 00 30 00 30 00 * em28xx #0: i2c eeprom b0: 31 00 30 00 33 00 39 00 34 00 34 00 32 00 00 00 * em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 * em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 * em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 * em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 * em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0x2de5abbf * em28xx #0: EEPROM info: * em28xx #0: AC97 audio (5 sample rates) * em28xx #0: 500mA max power * em28xx #0: Table at 0x27, strings=0x168e, 0x1ca4, 0x246a * input: em28xx IR (em28xx #0) as /devices/pci0000:00/0000:00:1a.7/usb1/1-1/input/input6 * em28xx #0: Config register raw data: 0xd0 * em28xx #0: AC97 vendor ID = 0xffffffff * em28xx #0: AC97 features = 0x6a90 * em28xx #0: Empia 202 AC97 audio processor detected * em28xx #0: v4l2 driver version 0.1.2 * em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0 * usbcore: registered new interface driver em28xx * em28xx driver loaded * xc2028 0-0061: creating new instance * xc2028 0-0061: type set to XCeive xc2028/xc3028 tuner * em28xx #0/2: xc3028 attached * DVB: registering new adapter (em28xx #0) * DVB: registering adapter 0 frontend 0 (LG Electronics LGDT3303 VSB/QAM Frontend)... * Successfully loaded em28xx-dvb * Em28xx: Initialized (Em28xx dvb Extension) extension > ls -lR /dev/dvb /dev/dvb: total 0 drwxr-xr-x 2 root root 120 2009-06-21 13:06 adapter0 /dev/dvb/adapter0: total 0 crw-rw---- 1 root video 212, 1 2009-06-21 13:06 demux0 crw-rw---- 1 root video 212, 2 2009-06-21 13:06 dvr0 crw-rw---- 1 root video 212, 0 2009-06-21 13:06 frontend0 crw-rw---- 1 root video 212, 3 2009-06-21 13:06 net0 > ls -l /dev/vid* crw-rw---- 1 root video 81, 0 2009-06-21 13:06 /dev/video0 A much fuller dmesg (from the system boot) is below, but everything that appears to be em28xx-related is shown above. Terry, you mentioned the program "Zapping". I've just installed in Ubuntu and will give it a try when I get to the console later on. Paul, thank you for your message. I will try your mplayer suggestion once I'm at the console. One thing I failed to mention in the original e-mail is that I HAD this device working once before (back in February). I put the device away for a few months after that. Since then, Ubuntu has updated the kernel, so I updated and reinstalled the v4l drivers. This time, though, something seems to be going wrong, and I don't know what's different. Either 1) I've forgotten a criticial step that I did last time, or 2) something in the v4l drivers has changed resulting in a problem, or 3) the device itself has broken. Assuming #2 is unlikely, I intend to try to rule out #3 by hooking the Pinnacle device up to a Windows box tomorrow. Meanwhile, I'm operating on assumption #1: I'm missing something important. I don't understand why there is no mention of the Xceive tuner in the dmesg output, though... or an attempt to load the firmware for it. Anway, here's a much longer dmesg. Any other information that would help, I'll be happy to add. * Initializing cgroup subsys cpuset * Initializing cgroup subsys cpu * Linux version 2.6.24-24-server (buildd@rothera) (gcc version 4.2.4 (Ubuntu 4.2.4-1ubuntu4)) #1 SMP Wed Apr 15 16:36:01 UTC 2009 (Ubuntu 2.6.24-24.53-server) * BIOS-provided physical RAM map: * BIOS-e820: 0000000000000000 - 000000000009e800 (usable) * BIOS-e820: 000000000009f800 - 00000000000a0000 (reserved) * BIOS-e820: 00000000000f0000 - 0000000000100000 (reserved) * BIOS-e820: 0000000000100000 - 00000000cfeb0000 (usable) * BIOS-e820: 00000000cfeb0000 - 00000000cfee2000 (ACPI NVS) * BIOS-e820: 00000000cfee2000 - 00000000cfef0000 (ACPI data) * BIOS-e820: 00000000cfef0000 - 00000000cff00000 (reserved) * BIOS-e820: 00000000e0000000 - 00000000e4000000 (reserved) * BIOS-e820: 00000000fec00000 - 0000000100000000 (reserved) * BIOS-e820: 0000000100000000 - 0000000130000000 (usable) * 3968MB HIGHMEM available. * 896MB LOWMEM available. * found SMP MP-table at 000f57a0 * NX (Execute Disable) protection: active * Entering add_active_range(0, 0, 1245184) 0 entries of 256 used * Zone PFN ranges: * DMA 0 -> 4096 * Normal 4096 -> 229376 * HighMem 229376 -> 1245184 * Movable zone start PFN for each node * early_node_map[1] active PFN ranges * 0: 0 -> 1245184 * On node 0 totalpages: 1245184 * DMA zone: 32 pages used for memmap * DMA zone: 0 pages reserved * DMA zone: 4064 pages, LIFO batch:0 * Normal zone: 1760 pages used for memmap * Normal zone: 223520 pages, LIFO batch:31 * HighMem zone: 7936 pages used for memmap * HighMem zone: 1007872 pages, LIFO batch:31 * Movable zone: 0 pages used for memmap * DMI 2.4 present. * ACPI: RSDP signature @ 0xC00F75D0 checksum 0 * ACPI: RSDP 000F75D0, 0014 (r0 GBT ) * ACPI: RSDT CFEE2040, 003C (r1 GBT GBTUACPI 42302E31 GBTU 1010101) * ACPI: FACP CFEE20C0, 0074 (r1 GBT GBTUACPI 42302E31 GBTU 1010101) * ACPI: DSDT CFEE2180, 50A9 (r1 GBT GBTUACPI 1000 MSFT 100000C) * ACPI: FACS CFEB0000, 0040 * ACPI: EUDS CFEE79C0, 0500 (r1 GBT 0 0) * ACPI: HPET CFEE7880, 0038 (r1 GBT GBTUACPI 42302E31 GBTU 98) * ACPI: MCFG CFEE7900, 003C (r1 GBT GBTUACPI 42302E31 GBTU 1010101) * ACPI: APIC CFEE7280, 0084 (r1 GBT GBTUACPI 42302E31 GBTU 1010101) * ACPI: SSDT CFEE87F0, 03AB (r1 PmRef CpuPm 3000 INTL 20040311) * ACPI: PM-Timer IO Port: 0x408 * ACPI: Local APIC address 0xfee00000 * ACPI: LAPIC (acpi_id[0x00] lapic_id[0x00] enabled) * Processor #0 7:7 APIC version 20 * ACPI: LAPIC (acpi_id[0x01] lapic_id[0x03] enabled) * Processor #3 7:7 APIC version 20 * ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled) * Processor #1 7:7 APIC version 20 * ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled) * Processor #2 7:7 APIC version 20 * ACPI: LAPIC_NMI (acpi_id[0x00] dfl dfl lint[0x1]) * ACPI: LAPIC_NMI (acpi_id[0x01] dfl dfl lint[0x1]) * ACPI: LAPIC_NMI (acpi_id[0x02] dfl dfl lint[0x1]) * ACPI: LAPIC_NMI (acpi_id[0x03] dfl dfl lint[0x1]) * ACPI: IOAPIC (id[0x02] address[0xfec00000] gsi_base[0]) * IOAPIC[0]: apic_id 2, version 32, address 0xfec00000, GSI 0-23 * ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl) * ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level) * ACPI: IRQ0 used by override. * ACPI: IRQ2 used by override. * ACPI: IRQ9 used by override. * Enabling APIC mode: Flat. Using 1 I/O APICs * ACPI: HPET id: 0x8086a201 base: 0xfed00000 * Using ACPI (MADT) for SMP configuration information * Allocating PCI resources starting at e6000000 (gap: e4000000:1ac00000) * swsusp: Registered nosave memory region: 000000000009e000 - 00000000000a0000 * swsusp: Registered nosave memory region: 00000000000a0000 - 00000000000f0000 * swsusp: Registered nosave memory region: 00000000000f0000 - 0000000000100000 * Built 1 zonelists in Zone order, mobility grouping on. Total pages: 1235456 * Kernel command line: root=UUID=2f7e91eb-9b4a-4f03-aeda-c472bd2d7077 ro nosplash vga=0x034a * mapped APIC to ffffb000 (fee00000) * mapped IOAPIC to ffffa000 (fec00000) * Enabling fast FPU save and restore... done. * Enabling unmasked SIMD FPU exception support... done. * Initializing CPU#0 * PID hash table entries: 4096 (order: 12, 16384 bytes) * Detected 2833.082 MHz processor. * Console: colour dummy device 80x25 * console [tty0] enabled * Dentry cache hash table entries: 131072 (order: 7, 524288 bytes) * Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) * Memory: 4140224k/4980736k available (2258k kernel code, 51520k reserved, 1037k data, 384k init, 3275456k highmem) * virtual kernel memory layout: * fixmap : 0xfff4c000 - 0xfffff000 ( 716 kB) * pkmap : 0xffc00000 - 0xffe00000 (2048 kB) * vmalloc : 0xf8800000 - 0xffbfe000 ( 115 MB) * lowmem : 0xc0000000 - 0xf8000000 ( 896 MB) * .init : 0xc043e000 - 0xc049e000 ( 384 kB) * .data : 0xc0334a89 - 0xc0437fe4 (1037 kB) * .text : 0xc0100000 - 0xc0334a89 (2258 kB) * Checking if this processor honours the WP bit even in supervisor mode... Ok. * SLUB: Genslabs=11, HWalign=64, Order=0-1, MinObjects=4, CPUs=4, Nodes=1 * hpet clockevent registered * Calibrating delay using timer specific routine.. 5669.07 BogoMIPS (lpj=28345371) * Security Framework initialized * SELinux: Disabled at boot. * AppArmor: AppArmor initialized * Failure registering capabilities with primary security module. * Mount-cache hash table entries: 512 * Initializing cgroup subsys ns * Initializing cgroup subsys cpuacct * CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0408e3fd 00000000 00000001 00000000 * monitor/mwait feature present. * using mwait in idle threads. * CPU: L1 I cache: 32K, L1 D cache: 32K * CPU: L2 cache: 6144K * CPU: Physical Processor ID: 0 * CPU: Processor Core ID: 0 * CPU: After all inits, caps: bfebfbff 20100000 00000000 00043940 0408e3fd 00000000 00000001 00000000 * Compat vDSO mapped to ffffe000. * Checking 'hlt' instruction... OK. * SMP alternatives: switching to UP code * Early unpacking initramfs... done * ACPI: Core revision 20070126 * ACPI: Looking for DSDT in initramfs... error, file /DSDT.aml not found. * CPU0: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz stepping 0a * SMP alternatives: switching to SMP code * Booting processor 1/1 eip 3000 * Initializing CPU#1 * Calibrating delay using timer specific routine.. 5666.00 BogoMIPS (lpj=28330022) * CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0408e3fd 00000000 00000001 00000000 * monitor/mwait feature present. * CPU: L1 I cache: 32K, L1 D cache: 32K * CPU: L2 cache: 6144K * CPU: Physical Processor ID: 0 * CPU: Processor Core ID: 1 * CPU: After all inits, caps: bfebfbff 20100000 00000000 00043940 0408e3fd 00000000 00000001 00000000 * CPU1: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz stepping 0a * SMP alternatives: switching to SMP code * Booting processor 2/2 eip 3000 * Initializing CPU#2 * Calibrating delay using timer specific routine.. 5666.03 BogoMIPS (lpj=28330195) * CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0408e3fd 00000000 00000001 00000000 * monitor/mwait feature present. * CPU: L1 I cache: 32K, L1 D cache: 32K * CPU: L2 cache: 6144K * CPU: Physical Processor ID: 0 * CPU: Processor Core ID: 2 * CPU: After all inits, caps: bfebfbff 20100000 00000000 00043940 0408e3fd 00000000 00000001 00000000 * CPU2: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz stepping 0a * SMP alternatives: switching to SMP code * Booting processor 3/3 eip 3000 * Initializing CPU#3 * Calibrating delay using timer specific routine.. 5666.05 BogoMIPS (lpj=28330266) * CPU: After generic identify, caps: bfebfbff 20100000 00000000 00000000 0408e3fd 00000000 00000001 00000000 * monitor/mwait feature present. * CPU: L1 I cache: 32K, L1 D cache: 32K * CPU: L2 cache: 6144K * CPU: Physical Processor ID: 0 * CPU: Processor Core ID: 3 * CPU: After all inits, caps: bfebfbff 20100000 00000000 00043940 0408e3fd 00000000 00000001 00000000 * CPU3: Intel(R) Core(TM)2 Quad CPU Q9550 @ 2.83GHz stepping 0a * Total of 4 processors activated (22667.17 BogoMIPS). * ENABLING IO-APIC IRQs * ..TIMER: vector=0x31 apic1=0 pin1=2 apic2=-1 pin2=-1 * checking TSC synchronization [CPU#0 -> CPU#1]: passed. * checking TSC synchronization [CPU#0 -> CPU#2]: passed. * checking TSC synchronization [CPU#0 -> CPU#3]: passed. * Brought up 4 CPUs * CPU0 attaching sched-domain: * domain 0: span 03 * groups: 01 02 * domain 1: span 0f * groups: 03 0c * CPU1 attaching sched-domain: * domain 0: span 03 * groups: 02 01 * domain 1: span 0f * groups: 03 0c * CPU2 attaching sched-domain: * domain 0: span 0c * groups: 04 08 * domain 1: span 0f * groups: 0c 03 * CPU3 attaching sched-domain: * domain 0: span 0c * groups: 08 04 * domain 1: span 0f * groups: 0c 03 * net_namespace: 64 bytes * Booting paravirtualized kernel on bare hardware * Time: 23:43:18 Date: 06/20/09 * NET: Registered protocol family 16 * EISA bus registered * ACPI: bus type pci registered * PCI: PCI BIOS revision 3.00 entry at 0xfb9e0, last bus=6 * PCI: Using configuration type 1 * Setting up standard PCI resources * ACPI: EC: Look up EC in DSDT * ACPI: Interpreter enabled * ACPI: (supports S0 S3 S4 S5) * ACPI: Using IOAPIC for interrupt routing * ACPI: PCI Root Bridge [PCI0] (0000:00) * PCI: Transparent bridge - 0000:00:1e.0 * ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT] * ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX0._PRT] * ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX3._PRT] * ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX4._PRT] * ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEX5._PRT] * ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.HUB0._PRT] * ACPI: PCI Interrupt Link [LNKA] (IRQs 3 4 5 6 7 9 10 11 12 14 *15) * ACPI: PCI Interrupt Link [LNKB] (IRQs 3 4 5 6 7 9 *10 11 12 14 15) * ACPI: PCI Interrupt Link [LNKC] (IRQs 3 *4 5 6 7 9 10 11 12 14 15) * ACPI: PCI Interrupt Link [LNKD] (IRQs 3 4 5 6 7 9 10 *11 12 14 15) * ACPI: PCI Interrupt Link [LNKE] (IRQs 3 4 5 6 7 9 10 11 12 *14 15) * ACPI: PCI Interrupt Link [LNKF] (IRQs 3 4 5 6 7 *9 10 11 12 14 15) * ACPI: PCI Interrupt Link [LNK0] (IRQs 3 4 *5 6 7 9 10 11 12 14 15) * ACPI: PCI Interrupt Link [LNK1] (IRQs *3 4 5 6 7 9 10 11 12 14 15) * Linux Plug and Play Support v0.97 (c) Adam Belay * pnp: PnP ACPI init * ACPI: bus type pnp registered * pnpacpi: exceeded the max number of mem resources: 12 * pnp: PnP ACPI: found 14 devices * ACPI: ACPI bus type pnp unregistered * PnPBIOS: Disabled by ACPI PNP * PCI: Using ACPI for IRQ routing * PCI: If a device doesn't work, try "pci=routeirq". If it helps, post a report * NET: Registered protocol family 8 * NET: Registered protocol family 20 * NetLabel: Initializing * NetLabel: domain hash size = 128 * NetLabel: protocols = UNLABELED CIPSOv4 * NetLabel: unlabeled traffic allowed by default * hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0 * hpet0: 4 64-bit timers, 14318180 Hz * AppArmor: AppArmor Filesystem Enabled * Time: tsc clocksource has been installed. * Switched to high resolution mode on CPU 0 * Switched to high resolution mode on CPU 3 * Switched to high resolution mode on CPU 1 * Switched to high resolution mode on CPU 2 * system 00:01: ioport range 0x4d0-0x4d1 has been reserved * system 00:01: ioport range 0x290-0x29f has been reserved * system 00:01: ioport range 0x800-0x805 has been reserved * system 00:01: ioport range 0x290-0x294 has been reserved * system 00:01: ioport range 0x880-0x88f has been reserved * system 00:0a: ioport range 0x400-0x4cf has been reserved * system 00:0a: ioport range 0x4d2-0x4ff has been reserved * system 00:0b: iomem range 0xe0000000-0xe3ffffff could not be reserved * system 00:0c: iomem range 0xd5000-0xd7fff has been reserved * system 00:0c: iomem range 0xf0000-0xf7fff could not be reserved * system 00:0c: iomem range 0xf8000-0xfbfff could not be reserved * system 00:0c: iomem range 0xfc000-0xfffff could not be reserved * system 00:0c: iomem range 0xcfeb0000-0xcfefffff could not be reserved * system 00:0c: iomem range 0x0-0x9ffff could not be reserved * system 00:0c: iomem range 0x100000-0xcfeaffff could not be reserved * system 00:0c: iomem range 0xfec00000-0xfec00fff could not be reserved * system 00:0c: iomem range 0xfed10000-0xfed1dfff could not be reserved * system 00:0c: iomem range 0xfed20000-0xfed8ffff could not be reserved * system 00:0c: iomem range 0xfee00000-0xfee00fff could not be reserved * system 00:0c: iomem range 0xffb00000-0xffb7ffff could not be reserved * PCI: Bridge: 0000:00:01.0 * IO window: 9000-9fff * MEM window: e4000000-e7ffffff * PREFETCH window: d0000000-dfffffff * PCI: Bridge: 0000:00:1c.0 * IO window: disabled. * MEM window: disabled. * PREFETCH window: disabled. * PCI: Bridge: 0000:00:1c.3 * IO window: a000-afff * MEM window: ea100000-ea1fffff * PREFETCH window: disabled. * PCI: Bridge: 0000:00:1c.4 * IO window: b000-bfff * MEM window: e8000000-e8ffffff * PREFETCH window: ea000000-ea0fffff * PCI: Bridge: 0000:00:1c.5 * IO window: c000-cfff * MEM window: e9000000-e9ffffff * PREFETCH window: ea200000-ea2fffff * PCI: Bridge: 0000:00:1e.0 * IO window: d000-dfff * MEM window: ea300000-ea3fffff * PREFETCH window: disabled. * ACPI: PCI Interrupt 0000:00:01.0[A] -> GSI 16 (level, low) -> IRQ 16 * PCI: Setting latency timer of device 0000:00:01.0 to 64 * ACPI: PCI Interrupt 0000:00:1c.0[A] -> GSI 16 (level, low) -> IRQ 16 * PCI: Setting latency timer of device 0000:00:1c.0 to 64 * ACPI: PCI Interrupt 0000:00:1c.3[D] -> GSI 19 (level, low) -> IRQ 17 * PCI: Setting latency timer of device 0000:00:1c.3 to 64 * ACPI: PCI Interrupt 0000:00:1c.4[A] -> GSI 16 (level, low) -> IRQ 16 * PCI: Setting latency timer of device 0000:00:1c.4 to 64 * ACPI: PCI Interrupt 0000:00:1c.5[B] -> GSI 17 (level, low) -> IRQ 18 * PCI: Setting latency timer of device 0000:00:1c.5 to 64 * PCI: Setting latency timer of device 0000:00:1e.0 to 64 * NET: Registered protocol family 2 * IP route cache hash table entries: 32768 (order: 5, 131072 bytes) * TCP established hash table entries: 131072 (order: 8, 1048576 bytes) * TCP bind hash table entries: 65536 (order: 7, 524288 bytes) * TCP: Hash tables configured (established 131072 bind 65536) * TCP reno registered * checking if image is initramfs... it is * Freeing initrd memory: 7342k freed * audit: initializing netlink socket (disabled) * audit(1245541398.743:1): initialized * highmem bounce pool size: 64 pages * Total HugeTLB memory allocated, 0 * VFS: Disk quotas dquot_6.5.1 * Dquot-cache hash table entries: 1024 (order 0, 4096 bytes) * io scheduler noop registered * io scheduler anticipatory registered * io scheduler deadline registered (default) * io scheduler cfq registered * Boot video device is 0000:01:00.0 * PCI: Setting latency timer of device 0000:00:01.0 to 64 * assign_interrupt_mode Found MSI capability * Allocate Port Service[0000:00:01.0:pcie00] * PCI: Setting latency timer of device 0000:00:1c.0 to 64 * assign_interrupt_mode Found MSI capability * Allocate Port Service[0000:00:1c.0:pcie00] * Allocate Port Service[0000:00:1c.0:pcie02] * PCI: Setting latency timer of device 0000:00:1c.3 to 64 * assign_interrupt_mode Found MSI capability * Allocate Port Service[0000:00:1c.3:pcie00] * Allocate Port Service[0000:00:1c.3:pcie02] * PCI: Setting latency timer of device 0000:00:1c.4 to 64 * assign_interrupt_mode Found MSI capability * Allocate Port Service[0000:00:1c.4:pcie00] * Allocate Port Service[0000:00:1c.4:pcie02] * PCI: Setting latency timer of device 0000:00:1c.5 to 64 * assign_interrupt_mode Found MSI capability * Allocate Port Service[0000:00:1c.5:pcie00] * Allocate Port Service[0000:00:1c.5:pcie02] * isapnp: Scanning for PnP cards... * isapnp: No Plug & Play device found * Real Time Clock Driver v1.12ac * hpet_resources: 0xfed00000 is busy * Serial: 8250/16550 driver $Revision: 1.90 $ 4 ports, IRQ sharing enabled * RAMDISK driver initialized: 16 RAM disks of 65536K size 1024 blocksize * input: Macintosh mouse button emulation as /devices/virtual/input/input0 * PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:PS2M] at 0x60,0x64 irq 1,12 * serio: i8042 KBD port at 0x60,0x64 irq 1 * serio: i8042 AUX port at 0x60,0x64 irq 12 * mice: PS/2 mouse device common for all mice * EISA: Probing bus 0 at eisa.0 * EISA: Detected 0 cards. * cpuidle: using governor ladder * cpuidle: using governor menu * NET: Registered protocol family 1 * Using IPI No-Shortcut mode * registered taskstats version 1 * Magic number: 13:627:757 * BIOS EDD facility v0.16 2004-Jun-25, 6 devices found * Freeing unused kernel memory: 384k freed * Write protecting the kernel read-only data: 828k * input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input1 * vesafb: framebuffer at 0xe5000000, mapped to 0xf8880000, using 14336k, total 14336k * vesafb: mode is 1600x1200x32, linelength=6400, pages=1 * vesafb: protected mode interface info at c000:c360 * vesafb: pmi: set display start = c00cc3c3, set palette = c00cc41e * vesafb: pmi: ports = 3b4 3b5 3ba 3c0 3c1 3c4 3c5 3c6 3c7 3c8 3c9 3cc 3ce 3cf 3d0 3d1 3d2 3d3 3d4 3d5 3da * vesafb: scrolling: redraw * vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0 * Console: switching to colour frame buffer device 200x75 * fb0: VESA VGA frame buffer device * fuse init (API version 7.9) * ACPI: SSDT CFEE7F10, 022A (r1 PmRef Cpu0Ist 3000 INTL 20040311) * ACPI: CPU0 (power states: C1[C1] C2[C2] C3[C3]) * ACPI: Processor [CPU0] (supports 8 throttling states) * ACPI: SSDT CFEE83D0, 0152 (r1 PmRef Cpu1Ist 3000 INTL 20040311) * ACPI: CPU3 (power states: C1[C1] C2[C2] C3[C3]) * ACPI: Processor [CPU1] (supports 8 throttling states) * ACPI: SSDT CFEE8530, 0152 (r1 PmRef Cpu2Ist 3000 INTL 20040311) * ACPI: CPU1 (power states: C1[C1] C2[C2] C3[C3]) * ACPI: Processor [CPU2] (supports 8 throttling states) * ACPI: SSDT CFEE8690, 0152 (r1 PmRef Cpu3Ist 3000 INTL 20040311) * ACPI: CPU2 (power states: C1[C1] C2[C2] C3[C3]) * ACPI: Processor [CPU3] (supports 8 throttling states) * usbcore: registered new interface driver usbfs * usbcore: registered new interface driver hub * usbcore: registered new device driver usb * USB Universal Host Controller Interface driver v3.0 * ACPI: PCI Interrupt 0000:00:1a.0[A] -> GSI 16 (level, low) -> IRQ 16 * PCI: Setting latency timer of device 0000:00:1a.0 to 64 * uhci_hcd 0000:00:1a.0: UHCI Host Controller * uhci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1 * uhci_hcd 0000:00:1a.0: irq 16, io base 0x0000e500 * usb usb1: configuration #1 chosen from 1 choice * hub 1-0:1.0: USB hub found * hub 1-0:1.0: 2 ports detected * SCSI subsystem initialized * libata version 3.00 loaded. * ACPI: PCI Interrupt 0000:00:1a.1[B] -> GSI 21 (level, low) -> IRQ 19 * PCI: Setting latency timer of device 0000:00:1a.1 to 64 * uhci_hcd 0000:00:1a.1: UHCI Host Controller * uhci_hcd 0000:00:1a.1: new USB bus registered, assigned bus number 2 * uhci_hcd 0000:00:1a.1: irq 19, io base 0x0000e000 * usb usb2: configuration #1 chosen from 1 choice * hub 2-0:1.0: USB hub found * hub 2-0:1.0: 2 ports detected * ACPI: PCI Interrupt 0000:00:1a.2[C] -> GSI 18 (level, low) -> IRQ 20 * PCI: Setting latency timer of device 0000:00:1a.2 to 64 * uhci_hcd 0000:00:1a.2: UHCI Host Controller * uhci_hcd 0000:00:1a.2: new USB bus registered, assigned bus number 3 * uhci_hcd 0000:00:1a.2: irq 20, io base 0x0000e100 * usb usb3: configuration #1 chosen from 1 choice * hub 3-0:1.0: USB hub found * hub 3-0:1.0: 2 ports detected * ahci 0000:00:1f.2: version 3.0 * ACPI: PCI Interrupt 0000:00:1f.2[B] -> GSI 19 (level, low) -> IRQ 17 * usb 2-1: new full speed USB device using uhci_hcd and address 2 * usb 2-1: configuration #1 chosen from 1 choice * ahci 0000:00:1f.2: AHCI 0001.0200 32 slots 6 ports 3 Gbps 0x3f impl SATA mode * ahci 0000:00:1f.2: flags: 64bit ncq sntf stag pm led clo pmp pio slum part * PCI: Setting latency timer of device 0000:00:1f.2 to 64 * scsi0 : ahci * scsi1 : ahci * scsi2 : ahci * scsi3 : ahci * scsi4 : ahci * scsi5 : ahci * ata1: SATA max UDMA/133 irq_stat 0x00400040, connection status changed * ata2: SATA max UDMA/133 irq_stat 0x00400040, connection status changed * ata3: SATA max UDMA/133 abar m2048@0xea406000 port 0xea406200 irq 218 * ata4: SATA max UDMA/133 abar m2048@0xea406000 port 0xea406280 irq 218 * ata5: SATA max UDMA/133 abar m2048@0xea406000 port 0xea406300 irq 218 * ata6: SATA max UDMA/133 abar m2048@0xea406000 port 0xea406380 irq 218 * ata1: SATA link up 3.0 Gbps (SStatus 123 SControl 300) * ata1.00: ATA-8: ST3640323AS, SD35, max UDMA/133 * ata1.00: 1250263728 sectors, multi 0: LBA48 NCQ (depth 31/32) * ata1.00: configured for UDMA/133 * ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300) * ata2.00: ATA-8: WDC WD1001FALS-00J7B1, 05.00K05, max UDMA/133 * ata2.00: 1953525168 sectors, multi 0: LBA48 NCQ (depth 31/32) * ata2.00: configured for UDMA/133 * ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300) * ata3.00: ATAPI: HL-DT-STDVD-RAM GH22NS30, 1.01, max UDMA/100 * ata3.00: configured for UDMA/100 * ata4: SATA link down (SStatus 0 SControl 300) * ata5: SATA link down (SStatus 0 SControl 300) * ata6: SATA link down (SStatus 0 SControl 300) * scsi 0:0:0:0: Direct-Access ATA ST3640323AS SD35 PQ: 0 ANSI: 5 * scsi 1:0:0:0: Direct-Access ATA WDC WD1001FALS-0 05.0 PQ: 0 ANSI: 5 * scsi 2:0:0:0: CD-ROM HL-DT-ST DVD-RAM GH22NS30 1.01 PQ: 0 ANSI: 5 * ACPI: PCI Interrupt 0000:03:00.0[A] -> GSI 19 (level, low) -> IRQ 17 * ahci 0000:03:00.0: AHCI 0001.0000 32 slots 2 ports 3 Gbps 0x3 impl SATA mode * ahci 0000:03:00.0: flags: 64bit ncq pm led clo pmp pio slum part * PCI: Setting latency timer of device 0000:03:00.0 to 64 * scsi6 : ahci * scsi7 : ahci * ata7: SATA max UDMA/133 abar m8192@0xea100000 port 0xea100100 irq 17 * ata8: SATA max UDMA/133 abar m8192@0xea100000 port 0xea100180 irq 17 * ata7: SATA link down (SStatus 0 SControl 300) * ata8: SATA link down (SStatus 0 SControl 300) * ACPI: PCI Interrupt 0000:06:07.0[A] -> ACPI: PCI Interrupt 0000:00:1a.7[C] -> GSI 18 (level, low) -> IRQ 20 * PCI: Setting latency timer of device 0000:00:1a.7 to 64 * ehci_hcd 0000:00:1a.7: EHCI Host Controller * ehci_hcd 0000:00:1a.7: new USB bus registered, assigned bus number 4 * PCI: cache line size of 32 is not supported by device 0000:00:1a.7 * ehci_hcd 0000:00:1a.7: irq 20, io mem 0xea405000 * ehci_hcd 0000:00:1a.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 * usb usb4: configuration #1 chosen from 1 choice * hub 4-0:1.0: USB hub found * hub 4-0:1.0: 6 ports detected * GSI 23 (level, low) -> IRQ 21 * ohci1394: fw-host0: OHCI-1394 1.1 (PCI): IRQ=[21] MMIO=[ea344000-ea3447ff] Max Packet=[2048] IR/IT contexts=[4/8] * Driver 'sd' needs updating - please use bus_type methods * ACPI: PCI Interrupt 0000:00:1d.7[A] -> GSI 23 (level, low) -> IRQ 21 * PCI: Setting latency timer of device 0000:00:1d.7 to 64 * ehci_hcd 0000:00:1d.7: EHCI Host Controller * ehci_hcd 0000:00:1d.7: new USB bus registered, assigned bus number 5 * PCI: cache line size of 32 is not supported by device 0000:00:1d.7 * ehci_hcd 0000:00:1d.7: irq 21, io mem 0xea404000 * ehci_hcd 0000:00:1d.7: USB 2.0 started, EHCI 1.00, driver 10 Dec 2004 * usb usb5: configuration #1 chosen from 1 choice * hub 5-0:1.0: USB hub found * hub 5-0:1.0: 6 ports detected * sd 0:0:0:0: [sda] 1250263728 512-byte hardware sectors (640135 MB) * sd 0:0:0:0: [sda] Write Protect is off * sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 * sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA * ACPI: PCI Interrupt 0000:00:1d.0[A] -> GSI 23 (level, low) -> IRQ 21 * ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 16 (level, low) -> IRQ 16 * PCI: Setting latency timer of device 0000:00:1d.0 to 64 * uhci_hcd 0000:00:1d.0: UHCI Host Controller * uhci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 6 * PCI: Setting latency timer of device 0000:03:00.1 to 64 * ACPI: PCI interrupt for device 0000:03:00.1 disabled * uhci_hcd 0000:00:1d.0: irq 21, io base 0x0000e200 * usb usb6: configuration #1 chosen from 1 choice * hub 6-0:1.0: USB hub found * hub 6-0:1.0: 2 ports detected * sd 0:0:0:0: [sda] 1250263728 512-byte hardware sectors (640135 MB) * sd 0:0:0:0: [sda] Write Protect is off * Driver 'sr' needs updating - please use bus_type methods * ACPI: PCI Interrupt 0000:00:1d.1[B] -> GSI 19 (level, low) -> IRQ 17 * PCI: Setting latency timer of device 0000:00:1d.1 to 64 * uhci_hcd 0000:00:1d.1: UHCI Host Controller * uhci_hcd 0000:00:1d.1: new USB bus registered, assigned bus number 7 * uhci_hcd 0000:00:1d.1: irq 17, io base 0x0000e300 * usb usb7: configuration #1 chosen from 1 choice * hub 7-0:1.0: USB hub found * hub 7-0:1.0: 2 ports detected * sd 0:0:0:0: [sda] Mode Sense: 00 3a 00 00 * usb 4-3: new high speed USB device using ehci_hcd and address 2 * sd 0:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA * sda:ACPI: PCI Interrupt 0000:00:1d.2[C] -> GSI 18 (level, low) -> IRQ 20 * sda1PCI: Setting latency timer of device 0000:00:1d.2 to 64 * uhci_hcd 0000:00:1d.2: UHCI Host Controller * uhci_hcd 0000:00:1d.2: new USB bus registered, assigned bus number 8 * uhci_hcd 0000:00:1d.2: irq 20, io base 0x0000e400 * usb usb8: configuration #1 chosen from 1 choice * hub 8-0:1.0: USB hub found * hub 8-0:1.0: 2 ports detected * sda2 <r8169 Gigabit Ethernet driver 2.2LK loaded * ACPI: PCI Interrupt 0000:04:00.0[A] -> GSI 16 (level, low) -> IRQ 16 * sda5> * PCI: Setting latency timer of device 0000:04:00.0 to 64 * sd 0:0:0:0: [sda] Attached SCSI disk * eth0: RTL8168c/8111c at 0xf8836000, 00:1f:d0:d5:14:97, XID 3c4000c0 IRQ 217 * r8169 Gigabit Ethernet driver 2.2LK loaded * ACPI: PCI Interrupt 0000:05:00.0[A] -> GSI 17 (level, low) -> IRQ 18 * PCI: Setting latency timer of device 0000:05:00.0 to 64 * eth1: RTL8168c/8111c at 0xf9708000, 00:1f:d0:81:2d:a3, XID 3c4000c0 IRQ 216 * ACPI: PCI Interrupt 0000:03:00.1[B] -> GSI 16 (level, low) -> IRQ 16 * PCI: Setting latency timer of device 0000:03:00.1 to 64 * scsi8 : pata_jmicron * scsi9 : pata_jmicron * ata9: PATA max UDMA/100 cmd 0xa000 ctl 0xa100 bmdma 0xa400 irq 16 * ata10: PATA max UDMA/100 cmd 0xa200 ctl 0xa300 bmdma 0xa408 irq 16 * sd 1:0:0:0: [sdb] 1953525168 512-byte hardware sectors (1000205 MB) * usb 4-3: configuration #1 chosen from 1 choice * sd 1:0:0:0: [sdb] Write Protect is off * sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 * sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA * sd 1:0:0:0: [sdb] 1953525168 512-byte hardware sectors (1000205 MB) * sd 1:0:0:0: [sdb] Write Protect is off * sd 1:0:0:0: [sdb] Mode Sense: 00 3a 00 00 * sd 1:0:0:0: [sdb] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA * sdb: sdb1 * sd 1:0:0:0: [sdb] Attached SCSI disk * usb 2-1: USB disconnect, address 2 * sr0: scsi3-mmc drive: 40x/48x writer dvd-ram cd/rw xa/form2 cdda tray * Uniform CD-ROM driver Revision: 3.20 * sr 2:0:0:0: Attached scsi CD-ROM sr0 * sd 0:0:0:0: Attached scsi generic sg0 type 0 * sd 1:0:0:0: Attached scsi generic sg1 type 0 * sr 2:0:0:0: Attached scsi generic sg2 type 5 * ieee1394: Host added: ID:BUS[0-00:1023] GUID[00ee5c5400001fd0] * Attempting manual resume * swsusp: Resume From Partition 8:5 * PM: Checking swsusp image. * PM: Resume from disk failed. * kjournald starting. Commit interval 5 seconds * EXT3-fs: mounted filesystem with ordered data mode. * input: PC Speaker as /devices/platform/pcspkr/input/input2 * pci_hotplug: PCI Hot Plug PCI Core version: 0.5 * input: Power Button (FF) as /devices/virtual/input/input3 * shpchp: Unknown symbol acpi_run_oshp * shpchp: Unknown symbol pci_hp_change_slot_info * shpchp: Unknown symbol pci_hp_register * shpchp: Unknown symbol pci_hp_deregister * shpchp: Unknown symbol acpi_get_hp_params_from_firmware * shpchp: Standard Hot Plug PCI Controller Driver version: 0.4 * r8169: eth0: link up * r8169: eth0: link up * r8169: eth1: link up * r8169: eth1: link up * Linux agpgart interface v0.102 * ACPI: Power Button (FF) [PWRF] * input: Power Button (CM) as /devices/virtual/input/input4 * ACPI: Power Button (CM) [PWRB] * input: ImExPS/2 Generic Explorer Mouse as /devices/platform/i8042/serio1/input/input5 * parport_pc 00:07: reported by Plug and Play ACPI * parport0: PC-style at 0x378, irq 7 [PCSPP,TRISTATE] * nvidia: module license 'NVIDIA' taints kernel. * ACPI: PCI Interrupt 0000:01:00.0[A] -> GSI 16 (level, low) -> IRQ 16 * PCI: Setting latency timer of device 0000:01:00.0 to 64 * NVRM: loading NVIDIA UNIX x86 Kernel Module 185.18.14 Wed May 27 02:23:13 PDT 2009 * Linux video capture interface: v2.00 * NET: Registered protocol family 10 * lo: Disabled Privacy Extensions * ACPI: PCI Interrupt 0000:06:01.0[A] -> GSI 19 (level, low) -> IRQ 17 * parport1: PC-style at 0xd400 [PCSPP,TRISTATE,EPP] * 0000:06:01.0: ttyS0 at I/O 0xd200 (irq = 17) is a 16550A * 0000:06:01.0: ttyS1 at I/O 0xd300 (irq = 17) is a 16550A * em28xx: New device Pinnacle Systems PCTV 800e @ 480 Mbps (2304:0227, interface 0, class 0) * em28xx #0: Identified as Pinnacle PCTV HD Pro Stick (card=17) * em28xx #0: chip ID is em2882/em2883 * ACPI: PCI Interrupt 0000:00:1b.0[A] -> GSI 22 (level, low) -> IRQ 22 * PCI: Setting latency timer of device 0000:00:1b.0 to 64 * em28xx #0: i2c eeprom 00: 1a eb 67 95 04 23 27 02 d0 12 5c 03 8e 16 a4 1c * em28xx #0: i2c eeprom 10: 6a 24 27 57 46 07 01 00 00 00 00 00 00 00 00 00 * em28xx #0: i2c eeprom 20: 46 00 01 00 f0 10 02 00 b8 00 00 00 5b 1c 00 00 * em28xx #0: i2c eeprom 30: 00 00 20 40 20 80 02 20 01 01 00 00 00 00 00 00 * em28xx #0: i2c eeprom 40: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 * em28xx #0: i2c eeprom 50: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 * em28xx #0: i2c eeprom 60: 00 00 00 00 00 00 00 00 00 00 24 03 50 00 69 00 * em28xx #0: i2c eeprom 70: 6e 00 6e 00 61 00 63 00 6c 00 65 00 20 00 53 00 * em28xx #0: i2c eeprom 80: 79 00 73 00 74 00 65 00 6d 00 73 00 00 00 16 03 * em28xx #0: i2c eeprom 90: 50 00 43 00 54 00 56 00 20 00 38 00 30 00 30 00 * em28xx #0: i2c eeprom a0: 65 00 00 00 1c 03 30 00 36 00 31 00 30 00 30 00 * em28xx #0: i2c eeprom b0: 31 00 30 00 33 00 39 00 34 00 34 00 32 00 00 00 * em28xx #0: i2c eeprom c0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 * em28xx #0: i2c eeprom d0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 * em28xx #0: i2c eeprom e0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 * em28xx #0: i2c eeprom f0: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 * em28xx #0: EEPROM ID= 0x9567eb1a, EEPROM hash = 0x2de5abbf * em28xx #0: EEPROM info: * em28xx #0: AC97 audio (5 sample rates) * em28xx #0: 500mA max power * em28xx #0: Table at 0x27, strings=0x168e, 0x1ca4, 0x246a * hda_codec: Unknown model for ALC882, trying auto-probe from BIOS... * input: em28xx IR (em28xx #0) as /devices/pci0000:00/0000:00:1a.7/usb4/4-3/input/input6 * ACPI: PCI Interrupt 0000:06:00.0[A] -> GSI 20 (level, low) -> IRQ 23 * Vortex: init.... em28xx #0: Config register raw data: 0xd0 * em28xx #0: AC97 vendor ID = 0xffffffff * em28xx #0: AC97 features = 0x6a90 * em28xx #0: Empia 202 AC97 audio processor detected * em28xx #0: v4l2 driver version 0.1.2 * em28xx #0: V4L2 device registered as /dev/video0 and /dev/vbi0 * usbcore: registered new interface driver em28xx * em28xx driver loaded * xc2028 0-0061: creating new instance * xc2028 0-0061: type set to XCeive xc2028/xc3028 tuner * em28xx #0/2: xc3028 attached * DVB: registering new adapter (em28xx #0) * DVB: registering adapter 0 frontend 0 (LG Electronics LGDT3303 VSB/QAM Frontend)... * Successfully loaded em28xx-dvb * Em28xx: Initialized (Em28xx dvb Extension) extension * done. * gameport: AU88x0 Gameport is pci0000:06:00.0/gameport0, speed 596kHz * loop: module loaded * lp0: using parport0 (interrupt-driven). * lp1: using parport1 (polling). * it87: Found IT8718F chip at 0x290, revision 5 * it87: in3 is VCC (+5V) * Adding 9863868k swap on /dev/sda5. Priority:-1 extents:1 across:9863868k * EXT3 FS on sda1, internal journal * kjournald starting. Commit interval 5 seconds * EXT3 FS on sdb1, internal journal * EXT3-fs: mounted filesystem with ordered data mode. * ip_tables: (C) 2000-2006 Netfilter Core Team * nf_conntrack version 0.5.0 (16384 buckets, 65536 max) _________________________________________________________________ Lauren found her dream laptop. Find the PC that’s right for you. http://www.microsoft.com/windows/choosepc/?ocid=ftp_val_wl_290-- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
