Re: [PULL] http://www.linuxtv.org/hg/~hverkuil/v4l-dvb-vpfe-cap

[Date Prev][Date Next][Thread Prev][Thread Next][Date Index][Thread Index]

 



Em Sun, 21 Jun 2009 20:20:29 +0200
Hans Verkuil <hverkuil@xxxxxxxxx> escreveu:

> On Sunday 21 June 2009 19:33:11 Mauro Carvalho Chehab wrote:
> > Em Fri, 19 Jun 2009 14:39:14 +0200
> >
> > Hans Verkuil <hverkuil@xxxxxxxxx> escreveu:
> > > Hi Mauro,
> > >
> > > Please pull from http://www.linuxtv.org/hg/~hverkuil/v4l-dvb-vpfe-cap
> > > for the following:
> > >
> > > - tvp514x: Migration to sub-device framework
> >
> > Hmm... the kernel-doc format is wrong on all function description comment
> > changes on tvp514x:
> 
> I'm assuming this can be corrected in a separate patch later? I don't think 
> this is a blocking issue.

Yes, sure this is not blocking.

BTW, please, _never_ send me an email to a public list C/C a subscribers-only list:

Your mail to 'Davinci-linux-open-source' with the subject

    Re: [PULL] http://www.linuxtv.org/hg/~hverkuil/v4l-dvb-vpfe-cap

Is being held until the list moderator can review it for approval.

> Muralidharan, can you take a look at this?
> 
> Regards,
> 
> 	Hans
> 
> >
> > -/**
> > +/*
> >   * struct tvp514x_decoder - TVP5146/47 decoder object
> > - * @v4l2_int_device: Slave handle
> > - * @tvp514x_slave: Slave pointer which is used by @v4l2_int_device
> > + * @sd: Subdevice Slave handle
> >   * @tvp514x_regs: copy of hw's regs with preset values.
> >   * @pdata: Board specific
> > - * @client: I2C client data
> > - * @id: Entry from I2C table
> >   * @ver: Chip version
> > - * @state: TVP5146/47 decoder state - detected or not-detected
> > + * @streaming: TVP5146/47 decoder streaming - enabled or disabled.
> >   * @pix: Current pixel format
> >   * @num_fmts: Number of formats
> >   * @fmt_list: Format list
> >   * @current_std: Current standard
> >   * @num_stds: Number of standards
> >   * @std_list: Standards list
> > - * @route: input and output routing at chip level
> > + * @input: Input routing at chip level
> > + * @output: Output routing at chip level
> >   */
> >
> > Please read Documentation/kernel-doc-nano-HOWTO.txt for the proper
> > format. Basically, it should be like this example:
> >
> > /**
> >  * foobar() - short function description of foobar
> >  * @arg1:       Describe the first argument to foobar.
> >  * @arg2:       Describe the second argument to foobar.
> >  *              One can provide multiple line descriptions
> >  *              for arguments.
> >  *
> >  * A longer description, with more discussion of the function foobar()
> >  * that might be useful to those using or modifying it.  Begins with
> >  * empty comment line, and may include additional embedded empty
> >  * comment lines.
> >  *
> >  * The longer description can have multiple paragraphs.
> >  **/
> >
> > > - v4l: vpfe capture bridge driver for DM355 and DM6446
> > > - vpfe_capture: add missing newlines and fix an incorrect error code.
> > > - v4l: ccdc hw device header file for vpfe capture
> > > - v4l: dm355 ccdc module for vpfe capture driver
> > > - v4l: dm644x ccdc module for vpfe capture driver
> > > - v4l: ccdc types used across ccdc modules for vpfe capture driver
> > > - v4l: common vpss module for video drivers
> > > - v4l: Makefile and config files for vpfe capture driver
> > > - v4l: davinci drivers should only be compiled for kernels >= 2.6.31.
> >
> > I'll try to analyze those remaining patches later today. Unfortunately,
> > I'm very busy this weekend finishing some pending work.
> >
> > > Hopefully these changes can be merged into 2.6.31.
> > >
> > > There are two arch/arm patches that need to be applied to the git tree.
> > > These patches should be applied last.
> > >
> > > They are:
> > >
> > > http://patchwork.kernel.org/patch/30968/
> > > http://patchwork.kernel.org/patch/30974/
> > >
> > > Note that I had to move patch 9 (vpss) in the original patch series
> > > before patch 6 (the Makefile changes) to make sure everything would
> > > still compile.
> > >
> > > Thanks,
> > >
> > >         Hans
> > >
> > > diffstat:
> > >  b/linux/drivers/media/video/davinci/Makefile           |    9
> > >  b/linux/drivers/media/video/davinci/ccdc_hw_device.h   |  110
> > >  b/linux/drivers/media/video/davinci/dm355_ccdc.c       | 1163
> > > +++++++++ b/linux/drivers/media/video/davinci/dm355_ccdc_regs.h  |  310
> > > ++ b/linux/drivers/media/video/davinci/dm644x_ccdc.c      |  878 ++++++
> > > b/linux/drivers/media/video/davinci/dm644x_ccdc_regs.h |  145 +
> > > b/linux/drivers/media/video/davinci/vpfe_capture.c     | 2136
> > > +++++++++++++++++
> > >  b/linux/drivers/media/video/davinci/vpss.c             |  301 ++
> > >  b/linux/include/media/davinci/ccdc_types.h             |   43
> > >  b/linux/include/media/davinci/dm355_ccdc.h             |  336 ++
> > >  b/linux/include/media/davinci/dm644x_ccdc.h            |  184 +
> > >  b/linux/include/media/davinci/vpfe_capture.h           |  188 +
> > >  b/linux/include/media/davinci/vpfe_types.h             |   51
> > >  b/linux/include/media/davinci/vpss.h                   |   69
> > >  linux/drivers/media/video/Kconfig                      |   49
> > >  linux/drivers/media/video/Makefile                     |    2
> > >  linux/drivers/media/video/davinci/vpfe_capture.c       |   27
> > >  linux/drivers/media/video/tvp514x.c                    |  879 ++----
> > >  linux/drivers/media/video/tvp514x_regs.h               |   10
> > >  linux/include/media/tvp514x.h                          |    4
> > >  v4l/versions.txt                                       |    7
> > >  21 files changed, 6346 insertions(+), 555 deletions(-)
> 
> 
> 


-- 

Cheers,
Mauro
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at  http://vger.kernel.org/majordomo-info.html

[Index of Archives]     [Linux Input]     [Video for Linux]     [Gstreamer Embedded]     [Mplayer Users]     [Linux USB Devel]     [Linux Audio Users]     [Linux Kernel]     [Linux SCSI]     [Yosemite Backpacking]
  Powered by Linux