Hi, I just purchased a Dvico FusionHDTV7 Dual Express and intend on using it with MythTV. Unfortunately, the dvb-apps aren't working with it just yet and I think I've narrowed down why. I've used mercurial to get the latest v4l-dvb source, compiled and installed the modules. I downloaded the firmware from Steven Toth's website, extracted and installed it. This all seems to run fine. Running scan against the us-ATSC-center-frequencies file returns no channels and running femon -a 0 returns the following output: status S | signal 0000 | snr 0000 | ber 00000000 | unc 00000000 | After examining dmesg output, I noticed the following bit: cx23885_dev_checkrevision() New hardware revision found 0x0 cx23885_dev_checkrevision() Hardware revision unknown 0x0 cx23885[0]/0: found at 0000:02:00.0, rev: 4, irq: 17, latency: 0, mmio: 0xfd800000 cx23885 0000:02:00.0: setting latency timer to 64 I'm pretty sure that is the problem but I don't know how to fix it. I also tried using mercurial to get the v4l tree from http://linuxtv.org/hg/~stoth/v4l-dvb/ with the same results as above. Thanks in advance for any assistance you can offer. mkutyna -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
