> Hi,
> sorry for the nusable output!
> I found the time consuming funktion:
> bttv_init_card2(btv);
> This takes about 4 min. today.
> my new testcode:
> /* needs to be done before i2c is registered */
> printk("linke 2:bttv_init_card1(btv);\n");
>
> bttv_init_card1(btv);
>
> /* register i2c + gpio */
> printk("line 3: init_bttv_i2c(btv);\n");
>
> init_bttv_i2c(btv);
>
> /* some card-specific stuff (needs working i2c) */
> printk("line4: some card-specific stuff needs working i2c \n");
> bttv_init_card2(btv);
> printk("irq init\n");
>
> init_irqreg(btv);
>
> dmesg output:
> [ 2282.430209] bttv: driver version 0.9.18 loaded
> [ 2282.430216] bttv: using 8 buffers with 2080k (520 pages) each for
> capture
> [ 2282.430313] bttv: Bt8xx card found (0).
> [ 2282.430334] bttv0: Bt878 (rev 17) at 0000:00:0b.0, irq: 19, latency:
> 32, mmio
> : 0xf7800000
> [ 2282.430777] bttv0: using: Leadtek WinFast 2000/ WinFast 2000 XP
> [card=34,insm
> od option]
> [ 2282.430839] bttv_gpio_tracking(bt
> [ 2282.430843] bttv0: gpio: en=00000000, out=00000000 in=003ff502 [init]
> [ 2282.430845] linke 2:bttv_init_card1(btv);
> [ 2282.430859] line 3: init_bttv_i2c(btv);
> [ 2282.430917] line4: some card-specific stuff needs working i2c
> [ 2282.430922] bttv0: tuner type=24
>
> Ok here is the 4 min dely and after that the following linkes were printed
> out:
>
> [ 2416.836017] bttv0: audio absent, no audio device found!
When you tested this with bttv 0.9.17, wasn't the delay then before the
text 'tuner type=24'?
Anyway, if you modprobe with the option 'audiodev=-1', will that solve
this? If not, then can you do the same printk trick in the bttv_init_card2
function?
Regards,
Hans
> [ 2416.836024] irq init
> [ 2416.840551] bttv0: registered device video1
> [ 2416.840684] bttv0: registered device vbi0
> [ 2416.840716] bttv0: registered device radio0
> [ 2416.840736] bttv0: PLL: 28636363 => 35468950 .<6>bttv0: PLL: 28636363
> => 3546
> 8950 . ok
> [ 2416.856221] input: bttv IR (card=34) as
> /devices/pci0000:00/0000:00:0b.0/inpu
> t/input10
> [ 2416.864069] ok
>
> Hope that helps!
> Regards
> Halim
> --
> Halim Sahin
> E-Mail:
> halim.sahin (at) t-online.de
> --
> To unsubscribe from this list: send the line "unsubscribe linux-media" in
> the body of a message to majordomo@xxxxxxxxxxxxxxx
> More majordomo info at http://vger.kernel.org/majordomo-info.html
>
--
Hans Verkuil - video4linux developer - sponsored by TANDBERG
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
