From: Muralidharan Karicheri <m-karicheri2@xxxxxx> Makefile and config files for the driver This adds Makefile and Kconfig changes to build vpfe capture driver. No change in this version Reviewed by: Hans Verkuil <hverkuil@xxxxxxxxx> Reviewed by: Laurent Pinchart <laurent.pinchart@xxxxxxxxx> Signed-off-by: Muralidharan Karicheri <m-karicheri2@xxxxxx> --- Applies to v4l-dvb repository drivers/media/video/Kconfig | 49 ++++++++++++++++++++++++++++++++++ drivers/media/video/Makefile | 2 + drivers/media/video/davinci/Makefile | 9 ++++++ 3 files changed, 60 insertions(+), 0 deletions(-) create mode 100644 drivers/media/video/davinci/Makefile diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index 94f4405..8a1bd1c 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -497,6 +497,55 @@ config VIDEO_VIVI Say Y here if you want to test video apps or debug V4L devices. In doubt, say N. +config VIDEO_VPSS_SYSTEM + tristate "VPSS System module driver" + depends on ARCH_DAVINCI + help + Support for vpss system module for video driver + default y + +config VIDEO_VPFE_CAPTURE + tristate "VPFE Video Capture Driver" + depends on VIDEO_V4L2 && ARCH_DAVINCI + select VIDEOBUF_DMA_CONTIG + help + Support for DMXXXX VPFE based frame grabber. This is the + common V4L2 module for following DMXXX SoCs from Texas + Instruments:- DM6446 & DM355. + + To compile this driver as a module, choose M here: the + module will be called vpfe-capture. + +config VIDEO_DM6446_CCDC + tristate "DM6446 CCDC HW module" + depends on ARCH_DAVINCI_DM644x && VIDEO_VPFE_CAPTURE + select VIDEO_VPSS_SYSTEM + default y + help + Enables DaVinci CCD hw module. DaVinci CCDC hw interfaces + with decoder modules such as TVP5146 over BT656 or + sensor module such as MT9T001 over a raw interface. This + module configures the interface and CCDC/ISIF to do + video frame capture from slave decoders. + + To compile this driver as a module, choose M here: the + module will be called vpfe. + +config VIDEO_DM355_CCDC + tristate "DM355 CCDC HW module" + depends on ARCH_DAVINCI_DM355 && VIDEO_VPFE_CAPTURE + select VIDEO_VPSS_SYSTEM + default y + help + Enables DM355 CCD hw module. DM355 CCDC hw interfaces + with decoder modules such as TVP5146 over BT656 or + sensor module such as MT9T001 over a raw interface. This + module configures the interface and CCDC/ISIF to do + video frame capture from a slave decoders + + To compile this driver as a module, choose M here: the + module will be called vpfe. + source "drivers/media/video/bt8xx/Kconfig" config VIDEO_PMS diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile index 7fb3add..1f28495 100644 --- a/drivers/media/video/Makefile +++ b/drivers/media/video/Makefile @@ -153,6 +153,8 @@ obj-$(CONFIG_VIDEO_MX3) += mx3_camera.o obj-$(CONFIG_VIDEO_PXA27x) += pxa_camera.o obj-$(CONFIG_VIDEO_SH_MOBILE_CEU) += sh_mobile_ceu_camera.o +obj-$(CONFIG_ARCH_DAVINCI) += davinci/ + obj-$(CONFIG_VIDEO_AU0828) += au0828/ obj-$(CONFIG_USB_VIDEO_CLASS) += uvc/ diff --git a/drivers/media/video/davinci/Makefile b/drivers/media/video/davinci/Makefile new file mode 100644 index 0000000..b84a405 --- /dev/null +++ b/drivers/media/video/davinci/Makefile @@ -0,0 +1,9 @@ +# +# Makefile for the davinci video device drivers. +# + +# Capture: DM6446 and DM355 +obj-$(CONFIG_VIDEO_VPSS_SYSTEM) += vpss.o +obj-$(CONFIG_VIDEO_VPFE_CAPTURE) += vpfe_capture.o +obj-$(CONFIG_VIDEO_DM6446_CCDC) += dm644x_ccdc.o +obj-$(CONFIG_VIDEO_DM355_CCDC) += dm355_ccdc.o -- 1.6.0.4 -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
