From: Muralidharan Karicheri <a0868495@xxxxxxxxxxxxxxxxxxxxxxxxxx> Makefile and config files for the driver This adds Makefile and Kconfig changes to build vpfe capture driver. Added configuration variable for vpss driver based on last review Reviewed By "Hans Verkuil". Reviewed By "Laurent Pinchart". Signed-off-by: Muralidharan Karicheri <m-karicheri2@xxxxxx> --- Applies to v4l-dvb repository drivers/media/video/Kconfig | 49 ++++++++++++++++++++++++++++++++++ drivers/media/video/Makefile | 1 + drivers/media/video/davinci/Makefile | 9 ++++++ 3 files changed, 59 insertions(+), 0 deletions(-) create mode 100644 drivers/media/video/davinci/Makefile diff --git a/drivers/media/video/Kconfig b/drivers/media/video/Kconfig index 9d48da2..ee6806c 100644 --- a/drivers/media/video/Kconfig +++ b/drivers/media/video/Kconfig @@ -479,6 +479,55 @@ config VIDEO_VIVI Say Y here if you want to test video apps or debug V4L devices. In doubt, say N. +config VIDEO_VPSS_SYSTEM + tristate "VPSS System module driver" + depends on ARCH_DAVINCI + help + Support for vpss system module for video driver + default y + +config VIDEO_VPFE_CAPTURE + tristate "VPFE Video Capture Driver" + depends on VIDEO_V4L2 && ARCH_DAVINCI + select VIDEOBUF_DMA_CONTIG + help + Support for DMXXXX VPFE based frame grabber. This is the + common V4L2 module for following DMXXX SoCs from Texas + Instruments:- DM6446 & DM355. + + To compile this driver as a module, choose M here: the + module will be called vpfe-capture. + +config VIDEO_DM6446_CCDC + tristate "DM6446 CCDC HW module" + depends on ARCH_DAVINCI_DM644x && VIDEO_VPFE_CAPTURE + select VIDEO_VPSS_SYSTEM + default y + help + Enables DaVinci CCD hw module. DaVinci CCDC hw interfaces + with decoder modules such as TVP5146 over BT656 or + sensor module such as MT9T001 over a raw interface. This + module configures the interface and CCDC/ISIF to do + video frame capture from slave decoders. + + To compile this driver as a module, choose M here: the + module will be called vpfe. + +config VIDEO_DM355_CCDC + tristate "DM355 CCDC HW module" + depends on ARCH_DAVINCI_DM355 && VIDEO_VPFE_CAPTURE + select VIDEO_VPSS_SYSTEM + default y + help + Enables DM355 CCD hw module. DM355 CCDC hw interfaces + with decoder modules such as TVP5146 over BT656 or + sensor module such as MT9T001 over a raw interface. This + module configures the interface and CCDC/ISIF to do + video frame capture from a slave decoders + + To compile this driver as a module, choose M here: the + module will be called vpfe. + source "drivers/media/video/bt8xx/Kconfig" config VIDEO_PMS diff --git a/drivers/media/video/Makefile b/drivers/media/video/Makefile index 3f1a035..bc8ac8e 100644 --- a/drivers/media/video/Makefile +++ b/drivers/media/video/Makefile @@ -147,6 +147,7 @@ obj-$(CONFIG_SOC_CAMERA_MT9V022) += mt9v022.o obj-$(CONFIG_SOC_CAMERA_OV772X) += ov772x.o obj-$(CONFIG_SOC_CAMERA_PLATFORM) += soc_camera_platform.o obj-$(CONFIG_SOC_CAMERA_TW9910) += tw9910.o +obj-$(CONFIG_ARCH_DAVINCI) += davinci/ obj-$(CONFIG_VIDEO_AU0828) += au0828/ diff --git a/drivers/media/video/davinci/Makefile b/drivers/media/video/davinci/Makefile new file mode 100644 index 0000000..b84a405 --- /dev/null +++ b/drivers/media/video/davinci/Makefile @@ -0,0 +1,9 @@ +# +# Makefile for the davinci video device drivers. +# + +# Capture: DM6446 and DM355 +obj-$(CONFIG_VIDEO_VPSS_SYSTEM) += vpss.o +obj-$(CONFIG_VIDEO_VPFE_CAPTURE) += vpfe_capture.o +obj-$(CONFIG_VIDEO_DM6446_CCDC) += dm644x_ccdc.o +obj-$(CONFIG_VIDEO_DM355_CCDC) += dm355_ccdc.o -- 1.6.0.4 -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
