Hi Dongsoo, Nathaniel ~
You must be expert on V4l2 ~ Thanks very much for your help and advice
~!~
I used the MXC camera interface driver from Fressscale ,I readed the
driver interface just now ,and have fouded that the driver not modified
the buf.lenth but buf.byteused . You are very right , I will use the
buf.byteused instead of buf.length ~
There is also a problem I want to consult to you ~ Can i get a full
frame with the below method if the driver have no problem ?
memcpy((mCameraProwave->getPreviewHeap())->base(),
v4l2Buffer[buf.index].start, buf.byteused) ;
Because I just need to implement a hal for getting the frame data and
post it to top layer , so I used the memcpy simply . Am I right ~ ? Or
what about your advice ?
Thanks a lot ~~
在 2009-06-08一的 15:56 +0900，Dongsoo, Nathaniel Kim写道：
> Hello Xie,
>
> I'm not sure which camera interface driver you are using, but it seems
> to be camera interface driver's problem. Let me guess, are you using
> pxa camera interface driver from Marvell?(proprietary but not in up
> stream kernel)
> It just looks like that camera interface driver is not returning
> proper data in dqbuf.
>
> And one more thing. I prefer to use byteused rather than length in
> buf. because as far as I know the size of preview data from camera is
> in byte unit which we need to copy to memory. But it should be
> possible to use length, I guess..
> Cheers,
>
> Nate
>
> On Mon, Jun 8, 2009 at 11:05 AM, xie<yili.xie@xxxxxxxxx> wrote:
> > Dear all ~~
> >
> > I have met a issue when I used the mmap method for previewing . I just
> > used the standard code as spec to get the image data :
> > status_t CameraHardwareProwave::V4l2Camera::v4l2CaptureMainloop()
> > {
> > LOG_FUNCTION_NAME
> > int rt ;
> > unsigned int i ;
> > fd_set fds ;
> > struct timeval tv ;
> > struct v4l2_buffer buf ;
> >
> > for(;;){
> > FD_ZERO(&fds) ;
> > FD_SET(v4l2Fd, &fds) ;
> > //now the time is long ,just for debug
> > tv.tv_sec = 2 ;
> > tv.tv_usec = 0 ;
> >
> > rt = select(v4l2Fd + 1, &fds, NULL, NULL, &tv) ;
> > LOGD("The value of select return : %d\n", rt) ;
> >
> > /********** for debug
> > if(V4L2_NOERROR != v4l2ReadFrame()){
> > LOGE("READ ERROR") ;
> > }
> > ***********/
> >
> > if(-1 == rt){
> > LOGE("there is something wrong in select function(select)") ;
> > //no defined error manage
> > return V4L2_IOCTL_ERROR ;
> > }
> > if(0 == rt){
> > LOGE("wait for data timeout in select") ;
> > return V4L2_TIMEOUT ;
> > }
> >
> > memset(&buf, 0, sizeof(buf)) ;
> > buf.type = V4L2_BUF_TYPE_VIDEO_CAPTURE ;
> > buf.memory = V4L2_MEMORY_MMAP ;
> > if(-1 == ioctl(v4l2Fd, VIDIOC_DQBUF, &buf)){
> > LOGE("there is something wrong in dequeue buffer(VIDIOC_DQBUF)") ;
> > return V4L2_IOCTL_ERROR ;
> > }
> >
> > assert(i < n_buf) ;
> > LOGE("buf.index 0buf.length = %d %d \n", buf.index , buf.length) ;
> > memcpy((mCameraProwave->getPreviewHeap())->base(),
> > v4l2Buffer[buf.index].start, buf.length) ;
> > if(-1 == ioctl(v4l2Fd, VIDIOC_QBUF, &buf)){
> > LOGE("there is something wrong in enqueue buffer(VIDIOC_QBUF)") ;
> > return V4L2_IOCTL_ERROR ;
> > }
> > //break ; //i don't know whether the break is needed ;
> >
> > }
> > return V4L2_NOERROR ;
> > }
> >
> > when executed the VIDIOC_DQBUF IOCTL,the return value was right, but the
> > value of buf.length would always be zero. Then I used the read()
> > function to read raw data in the file handle for debug, and I can get
> > the raw data. Anybody have met this issue before ? Who can give me some
> > advices or tell me what is wrong , thanks a lot ~
> >
> >
>
>
>
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
