Igor M. Liplianin wrote:
On 30 May 2009 20:00:32 Igor M. Liplianin wrote:
On 26 May 2009 23:02:57 Simon Kenyon wrote:
Igor M. Liplianin wrote:
The card is working with external LNB power supply, for example,
through the loop out from another sat box. So, we need to know, which
way to control LNB power on the board. Usually it is through GPIO pins.
For example:
Pins 112 and 111 for GPIO0, GPIO1. Also GPIO15 is at 65 pin.
You can edit this lines in code:
-*-*-*-*-*-*-*-*-*-*-*-*-
/* GPIO's for LNB power control for Axess DM05 */
#define DM05_LNB_MASK 0xfffffffc // GPIO
control #define DM05_LNB_13V 0x3fffd // GPIO
value #define DM05_LNB_18V 0x3fffc // GPIO
value -*-*-*-*-*-*-*-*-*-*-*-*-
BTW:
Bit value 0 for GPIOCTL means output, 1 - input.
Bit value for GPIOVAL - read/write.
GPIO pins count is 18. Bits over 18 affect nothing.
i will try to work out the correct values
when i have done so (or given up trying) i will let you know
thank you very much for your help
--
simon
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
Patch against latest v4l-dvb.
Please, test it.
Patch version 2
the picture seems to be breaking up badly
will revert to my version and see if that fixes it
--
simon
--
To unsubscribe from this list: send the line "unsubscribe linux-media" in
the body of a message to majordomo@xxxxxxxxxxxxxxx
More majordomo info at http://vger.kernel.org/majordomo-info.html
