OK, I've also tried the firmware from the instructions at steventoth.net/linux/hvr1200, giving me a dvb-fe-tda10048-1.0.fw file. I still cannot tune, it isn't clear to me whether the firmware is the issue, or whether one of the other errors is the problem. Or both.... I still have the other two cards in the machine, so the dmesg listing isn't clean. I'm extracting what looks relevant. I can post the whole log if something looks to be missing, or if really necessary I can remove the other two cards. That will take me a little longer and it is my production box, so I'd rather not unless there is some doubt about what is going on. The relevant messages in the log look to be: [ 10.232789] saa7130/34: v4l2 driver version 0.2.15 loaded [ 10.241194] saa7134 0000:05:00.0: PCI INT A -> GSI 20 (level, low) -> IRQ 20 [ 10.249731] saa7130[0]: found at 0000:05:00.0, rev: 1, irq: 20, latency: 32, mmio: 0xfc001000 [ 10.258483] saa7130[0]: subsystem: 107d:6655, board: Hauppauge WinTV-HVR1110r3 DVB-T/Hybrid [card=156,insmod option] [ 10.267477] saa7130[0]: board init: gpio is 122009 [ 10.293131] cx88/0: cx2388x v4l2 driver version 0.0.7 loaded [ 10.302052] IRQ 20/saa7130[0]: IRQF_DISABLED is not guaranteed on shared IRQs [ 10.312626] cx88/2: cx2388x MPEG-TS Driver Manager version 0.0.7 loaded [ 10.353716] cx2388x alsa driver version 0.0.7 loaded [ 10.400854] HDA Intel 0000:00:1b.0: PCI INT A -> GSI 22 (level, low) -> IRQ 22 [ 10.410254] HDA Intel 0000:00:1b.0: setting latency timer to 64 [ 10.464031] saa7130[0]: i2c eeprom 00: 7d 10 55 66 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 [ 10.473672] saa7130[0]: i2c eeprom 10: 00 ff 82 0e ff 20 ff ff ff ff ff ff ff ff ff ff [ 10.483379] saa7130[0]: i2c eeprom 20: 01 40 01 01 01 ff 01 03 08 ff 00 8a ff ff ff ff [ 10.492999] saa7130[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.502537] saa7130[0]: i2c eeprom 40: ff 35 00 c0 00 10 03 02 ff 04 ff ff ff ff ff ff [ 10.512026] saa7130[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.521514] saa7130[0]: i2c eeprom 60: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.530935] saa7130[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.540418] saa7130[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.549677] saa7130[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.558693] saa7130[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.567617] saa7130[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.567739] saa7130[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.567746] saa7130[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.567753] saa7130[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.567758] saa7130[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.567765] tveeprom 1-0050: Encountered bad packet header [ff]. Corrupt or not a Hauppauge eeprom. [ 10.567767] saa7130[0]: warning: unknown hauppauge model #0 [ 10.567768] saa7130[0]: hauppauge eeprom: model=0 [ 10.712041] Chip ID is not zero. It is not a TEA5767 [ 10.720138] tuner 1-0060: chip found @ 0xc0 (saa7130[0]) [ 10.768020] tda8290: no gate control were provided! [ 10.775900] tuner 1-0060: Tuner has no way to set tv freq [ 10.783718] tuner 1-0060: Tuner has no way to set tv freq [ 10.791567] saa7130[0]: registered device video0 [v4l2] [ 10.799359] saa7130[0]: registered device vbi0 [ 10.807034] saa7130[0]: registered device radio0 <some stuff from other cards> [ 12.273033] DVB: registering new adapter (saa7130[0]) [ 12.281372] DVB: registering adapter 1 frontend 0 (NXP TDA10048HN DVB-T)... [ 12.617026] tda10048_firmware_upload: waiting for firmware upload (dvb-fe-tda10048-1.0.fw)... [ 12.617029] saa7134 0000:05:00.0: firmware: requesting dvb-fe-tda10048-1.0.fw [ 12.694154] EXT3 FS on md21, internal journal [ 12.709531] tda10048_firmware_upload: firmware read 24878 bytes. [ 12.718281] tda10048_firmware_upload: firmware uploading <some non-dvb stuff> [ 16.820022] tda10048_firmware_upload: firmware uploaded [ 16.944017] dvb_init() allocating 1 frontend [ 17.005238] tuner-simple 3-0061: unable to probe Philips TD1316 Hybrid Tuner, proceeding anyway.<6>tuner-simple 3-0061: creating new instance [ 17.013309] tuner-simple 3-0061: type set to 67 (Philips TD1316 Hybrid Tuner) [ 17.021250] DVB: registering new adapter (saa7134[1]) [ 17.029133] DVB: registering adapter 2 frontend 0 (Zarlink MT352 DVB-T)... [ 17.162115] saa7134 ALSA driver for DMA sound loaded [ 17.170016] saa7130[0]/alsa: Hauppauge WinTV-HVR1110r3 DVB-T/Hybrid doesn't support digital audio [ 17.178093] IRQ 19/saa7134[1]: IRQF_DISABLED is not guaranteed on shared IRQs [ 17.186235] saa7134[1]/alsa: saa7134[1] at 0xfc000000 irq 19 registered as card -1 <I suspect some of those last few lines relate to the Avermedia, as it has a Zarlink on it, and I don't think the DTV1000S does> I suspect that the key bit is where it loads the firmware, but is then still unable to probe the tuner. I'm guessing that means I have the wrong firmware. I have downloaded the windows drivers from: http://drivers.softpedia.com/get/TV-Tuner-Co/LEADTEK/Leadtek-WinFast-DTV1000S-XP-Driver-20070907-WHQL.shtml But I have no idea how to proceed in finding the firmware inside them. I had a look around on the web, and there are a bunch of firmware extracting scripts, but they seem to all rely on knowing the appropriate offsets within your windows drivers. I'm guessing there must be some technique involving decompiling the driver, or some other magic. But I can't find a guide that explains that. I'm willing to give it a go if someone can point to an instruction guide somewhere. Alternatively, it may mean that I need a proper config for the chips - it looks like the errors at: [ 10.567765] tveeprom 1-0050: Encountered bad packet header [ff]. Corrupt or not a Hauppauge eeprom. [ 10.567767] saa7130[0]: warning: unknown hauppauge model #0 [ 10.567768] saa7130[0]: hauppauge eeprom: model=0 [ 10.712041] Chip ID is not zero. It is not a TEA5767 [ 10.720138] tuner 1-0060: chip found @ 0xc0 (saa7130[0]) [ 10.768020] tda8290: no gate control were provided! [ 10.775900] tuner 1-0060: Tuner has no way to set tv freq might be pretty relevant. Thanks for any advice on where to go next, Paul -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
