I've been working through this thread. I am running 2.6.30-rc6. I've checked out the patch from ttp://kernellabs.com/hg/~mk/hvr1110, and installed it. I modified one file - cx88-cards.c, which doesn't seem to work with my DTV2000H, but otherwise just using the code per the patch. I've added "options saa7134 card=156" into a file in /etc/modprobe.d/ So far, so good. I have made more progress than Brad appears to have, it is recognising the card, but appears to not be tuning it. I suspect the problem is the lack of firmware: dvb-fe-tda10048-1.0.fw I have three tuner cards in my machine - a DTV2000H and an Avermedia 777, so my full dmesg log is a bit untidy. This is exacerbated by the fact that the Avermedia also uses the saa7134 chipset. I believe the lines that relate to the DTV1000S, and that are relevant are these: <the usual eeprom lines, ending with> saa7130[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff tveeprom 2-0050: Encountered bad packet header [ff]. Corrupt or not a Hauppauge eeprom. saa7130[0]: warning: unknown hauppauge model #0 saa7130[0]: hauppauge eeprom: model=0 Chip ID is not zero. It is not a TEA5767 tuner 2-0060: chip found @ 0xc0 (saa7130[0] tda8290: no gate control were provided! tuner 2-0060: Tuner has no way to set tv freq tuner 2-0060: Tuner has no way to set tv freq tda10048_firmware_upload: waiting for firmware upload (dvb-fe-tda10048-1.0.fw)... saa7134 0000:05:00.0: firmware: requesting dvb-fe-tda10048-1.0.fw tda10048_firmware_upload: Upload failed. (file not found?) tuner-simple 3-0061: unable to probe Philips TD1316 Hybrid Tuner, proceeding anyway.<6>tuner-simple 3-0061: creating new instance tuner-simple 3-0061: type set to 67 (Philips TD1316 Hybrid Tuner) I can see the appropriate firmware for the Hauppage, but I'm guessing that I need special firmware for the WinFast implementation. So I think I need to do something to get the right firmware. Is it a reasonable presumption that the firmware is the problem here - or is it actually the earlier messages that are the underlying problem? Or perhaps both? I have /dev/adapter1/ created, but it won't tune. When trying to tune, dmesg is getting errors along the lines of missing firmware, then seg fault. That was leading me to think that firmware is the issue. Is it useful to try the hauppage firmware, or is that unlikely to work? Thanks, Paul -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
