On 29 мая 2009, "Igor M. Liplianin" <liplianin@xxxxx>, linux-media-owner@xxxxxxxxxxxxxxx wrote: > Simon Kenyon wrote: > > Igor M. Liplianin wrote: > >> The card is working with external LNB power supply, for example, > >> through the loop out from another sat box. So, we need to know, which > >> way to control LNB power on the board. Usually it is through GPIO pins. > >> For example: > >> Pins 112 and 111 for GPIO0, GPIO1. Also GPIO15 is at 65 pin. > >> You can edit this lines in code: > >> -*-*-*-*-*-*-*-*-*-*-*-*- > >> /* GPIO's for LNB power control for Axess DM05 */ > >> #define DM05_LNB_MASK 0xfffffffc // GPIO > >> control > >> #define DM05_LNB_13V 0x3fffd // GPIO value > >> #define DM05_LNB_18V 0x3fffc // GPIO value > >> -*-*-*-*-*-*-*-*-*-*-*-*- > >> > >> BTW: > >> Bit value 0 for GPIOCTL means output, 1 - input. > >> Bit value for GPIOVAL - read/write. > >> GPIO pins count is 18. Bits over 18 affect nothing. > > > > i will try to work out the correct values > > when i have done so (or given up trying) i will let you know > > > > thank you very much for your help > > -- > > simon > > well i thought i had sent out the correct information yesterday - but it > seems that the email didn't leave my machine Hi Simon, You forget to add linux-media@xxxxxxxxxxxxxxx to recepients list. > of well! the correct settings are: > > /* GPIO's for LNB power control for DM05 */ > #define DM05_LNB_MASK 0x00000000 > #define DM05_LNB_13V 0x00020000 > #define DM05_LNB_18V 0x00030000 > > with these values the card can control the LNB > it locks very quickly and gives good picture results (with kaffeine and > mythtv) > i am very pleased with this card so far > > i have not tried it behind a diseqc switch yet. i might have a go this > weekend > that would be the icing on the cake. > > would it be possible to push this into linuxtv.org? > > thanks for your help > -- > simon > > PS by the way, putting a value of 0x00020001 in DM05_LNB_18V crashes the > machine - so don't do that :-) So, without crashes it is not possible to write drivers :) > i found this out when trying to find the correct values Thank you for resolving this. I will prepair patch for linuxtv to test. Then after you test and confirm, I will commit. -- Igor M. Liplianin Microsoft Windows Free Zone - Linux used for all Computing Tasks -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
