Hello Mauro, Please pull from http://kernellabs.com/hg/~dheitmueller/xc5000-improvements-beta3 for the following: cx88: remove xc5000 reset for Pinnacle 800i xc5000: add copyright line au0828: send command to power down tuner when done with analog xc5000: poll at 5ms interval for register write command completion xc5000: add support for DVB-T tuning xc5000: switch to new xc5000 firmware 1.6.114 with redistribution rights dib0700: reduce xc5000 sleep time for Pinnacle 801e to 10ms tuner-xc2028: show the proper module description for no_poweroff option xc5000: don't load firmware until a tuning request is made xc5000: add "no_poweroff" module option xc5000: cleanup firmware loading messages xc5000: start using the newer "finerfreq" tuning command xc5000: add build version to debug info au0828: reduce reset time for xc5000 to 10ms xc5000: Properly support power down for newer firmware xc5000: switch to new version of Xceive firmware xc5000: do not sleep after digital tuning xc5000: restore sleep routine xc5000: check xc5000_readreg return value for XC_RESULT_SUCCESS xc5000: cleanup i2c write routines xc5000: cleanup i2c read routines xc5000: handle tuner reset failures properly dvb_frontend: fix race condition resulting in dropped tuning commands cx88: Fix race condition between cx8800 startup and hald -- Devin J. Heitmueller - Kernel Labs http://www.kernellabs.com -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
