Video Port Interface driver Add VPIF driver for DM646x. This code be used by the display and capture drivers. This version has some incorporated the review comments. Signed-off-by: Manjunath Hadli <mrh@xxxxxx> Signed-off-by: Brijesh Jadav <brijesh.j@xxxxxx> Signed-off-by: Chaithrika U S <chaithrika@xxxxxx> --- Applies v4l-dvb repository drivers/media/video/davinci/vpif.c | 234 +++++++++++++ drivers/media/video/davinci/vpif.h | 632 ++++++++++++++++++++++++++++++++++++ 2 files changed, 866 insertions(+), 0 deletions(-) create mode 100644 drivers/media/video/davinci/vpif.c create mode 100644 drivers/media/video/davinci/vpif.h diff --git a/drivers/media/video/davinci/vpif.c b/drivers/media/video/davinci/vpif.c new file mode 100644 index 0000000..1153af1 --- /dev/null +++ b/drivers/media/video/davinci/vpif.c @@ -0,0 +1,234 @@ +/* + * vpif - DM646x Video Port Interface driver + * VPIF is a receiver and transmitter for video data. It has two channels(0, 1) + * that receiveing video byte stream and two channels(2, 3) for video output. + * The hardware supports SDTV, HDTV formats, raw data capture. + * Currently, the driver supports NTSC and PAL standards. + * + * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed .as is. WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#include <linux/init.h> +#include <linux/module.h> +#include <linux/kernel.h> + +#include "vpif.h" + +MODULE_DESCRIPTION("TI DaVinci Video Port Interface driver"); +MODULE_LICENSE("GPL"); + +#define VPIF_CH0_MAX_MODES (22) +#define VPIF_CH1_MAX_MODES (02) +#define VPIF_CH2_MAX_MODES (15) +#define VPIF_CH3_MAX_MODES (02) + +static void inline vpif_wr_bit(u32 reg, u32 bit, u32 val) +{ + if (val) + vpif_set_bit(reg, bit); + else + vpif_clr_bit(reg, bit); +} + +/* This structure is used to keep track of VPIF size register's offsets */ +struct vpif_registers { + u32 h_cfg, v_cfg_00, v_cfg_01, v_cfg_02, v_cfg, ch_ctrl; + u32 line_offset, vanc0_strt, vanc0_size, vanc1_strt; + u32 vanc1_size, width_mask, len_mask; + u8 max_modes; +}; + +static const struct vpif_registers vpifregs[VPIF_NUM_CHANNELS] = { + /* Channel0 */ + { + VPIF_CH0_H_CFG, VPIF_CH0_V_CFG_00, VPIF_CH0_V_CFG_01, + VPIF_CH0_V_CFG_02, VPIF_CH0_V_CFG_03, VPIF_CH0_CTRL, + VPIF_CH0_IMG_ADD_OFST, 0, 0, 0, 0, 0x1FFF, 0xFFF, + VPIF_CH0_MAX_MODES, + }, + /* Channel1 */ + { + VPIF_CH1_H_CFG, VPIF_CH1_V_CFG_00, VPIF_CH1_V_CFG_01, + VPIF_CH1_V_CFG_02, VPIF_CH1_V_CFG_03, VPIF_CH1_CTRL, + VPIF_CH1_IMG_ADD_OFST, 0, 0, 0, 0, 0x1FFF, 0xFFF, + VPIF_CH1_MAX_MODES, + }, + /* Channel2 */ + { + VPIF_CH2_H_CFG, VPIF_CH2_V_CFG_00, VPIF_CH2_V_CFG_01, + VPIF_CH2_V_CFG_02, VPIF_CH2_V_CFG_03, VPIF_CH2_CTRL, + VPIF_CH2_IMG_ADD_OFST, VPIF_CH2_VANC0_STRT, VPIF_CH2_VANC0_SIZE, + VPIF_CH2_VANC1_STRT, VPIF_CH2_VANC1_SIZE, 0x7FF, 0x7FF, + VPIF_CH2_MAX_MODES + }, + /* Channel3 */ + { + VPIF_CH3_H_CFG, VPIF_CH3_V_CFG_00, VPIF_CH3_V_CFG_01, + VPIF_CH3_V_CFG_02, VPIF_CH3_V_CFG_03, VPIF_CH3_CTRL, + VPIF_CH3_IMG_ADD_OFST, VPIF_CH3_VANC0_STRT, VPIF_CH3_VANC0_SIZE, + VPIF_CH3_VANC1_STRT, VPIF_CH3_VANC1_SIZE, 0x7FF, 0x7FF, + VPIF_CH3_MAX_MODES + }, +}; + +/* vpif_set_mode_info: + * This function is used to set horizontal and vertical config parameters + * As per the standard in the channel, configure the values of L1, L3, + * L5, L7 L9, L11 in VPIF Register , also write width and height + */ +static void vpif_set_mode_info(const struct vpif_channel_config_params *config, + u8 channel_id, u8 config_channel_id) +{ + u32 value; + + value = (config->eav2sav & vpifregs[config_channel_id].width_mask); + value <<= VPIF_CH_LEN_SHIFT; + value |= (config->sav2eav & vpifregs[config_channel_id].width_mask); + regw(value, vpifregs[channel_id].h_cfg); + + value = (config->l1 & vpifregs[config_channel_id].len_mask); + value <<= VPIF_CH_LEN_SHIFT; + value |= (config->l3 & vpifregs[config_channel_id].len_mask); + regw(value, vpifregs[channel_id].v_cfg_00); + + value = (config->l5 & vpifregs[config_channel_id].len_mask); + value <<= VPIF_CH_LEN_SHIFT; + value |= (config->l7 & vpifregs[config_channel_id].len_mask); + regw(value, vpifregs[channel_id].v_cfg_01); + + value = (config->l9 & vpifregs[config_channel_id].len_mask); + value <<= VPIF_CH_LEN_SHIFT; + value |= (config->l11 & vpifregs[config_channel_id].len_mask); + regw(value, vpifregs[channel_id].v_cfg_02); + + value = (config->vsize & vpifregs[config_channel_id].len_mask); + regw(value, vpifregs[channel_id].v_cfg); +} + +/* config_vpif_params + * Function to set the parameters of a channel + * Mainly modifies the channel ciontrol register + * It sets frame format, yc mux mode + */ +static void config_vpif_params(struct vpif_params *vpifparams, + u8 channel_id, u8 found) +{ + const struct vpif_channel_config_params *config = &vpifparams->std_info; + u32 value, ch_nip, reg; + u8 start, end; + int i; + + start = channel_id; + end = channel_id + found; + + for (i = start; i < end; i++) { + reg = vpifregs[i].ch_ctrl; + if (channel_id < 2) + ch_nip = VPIF_CAPTURE_CH_NIP; + else + ch_nip = VPIF_DISPLAY_CH_NIP; + + vpif_wr_bit(reg, ch_nip, config->frm_fmt); + vpif_wr_bit(reg, VPIF_CH_YC_MUX_BIT, config->ycmux_mode); + vpif_wr_bit(reg, VPIF_CH_INPUT_FIELD_FRAME_BIT, + vpifparams->video_params.storage_mode); + + /* Set raster scanning SDR Format */ + vpif_clr_bit(reg, VPIF_CH_SDR_FMT_BIT); + vpif_wr_bit(reg, VPIF_CH_DATA_MODE_BIT, config->capture_format); + + if (channel_id > 1) /* Set the Pixel enable bit */ + vpif_set_bit(reg, VPIF_DISPLAY_PIX_EN_BIT); + else if (config->capture_format) { + /* Set the polarity of various pins */ + vpif_wr_bit(reg, VPIF_CH_FID_POLARITY_BIT, + vpifparams->params.raw_params.fid_pol); + vpif_wr_bit(reg, VPIF_CH_V_VALID_POLARITY_BIT, + vpifparams->params.raw_params.vd_pol); + vpif_wr_bit(reg, VPIF_CH_H_VALID_POLARITY_BIT, + vpifparams->params.raw_params.hd_pol); + + value = regr(reg); + /* Set data width */ + value &= ((~(unsigned int)(0x3)) << + VPIF_CH_DATA_WIDTH_BIT); + value |= ((vpifparams->params.raw_params.data_sz) << + VPIF_CH_DATA_WIDTH_BIT); + regw(value, reg); + } + + /* Write the pitch in the driver */ + regw((vpifparams->video_params.hpitch), + vpifregs[i].line_offset); + } +} + +/* vpif_set_video_params + * This function is used to set video parameters in VPIF register + */ +int vpif_set_video_params(struct vpif_params *vpifparams, u8 channel_id) +{ + const struct vpif_channel_config_params *config = &vpifparams->std_info; + int found = 1; + + vpif_set_mode_info(config, channel_id, channel_id); + if (!config->ycmux_mode) { + /* YC are on separate channels (HDTV formats) */ + vpif_set_mode_info(config, channel_id + 1, channel_id); + found = 2; + } + + config_vpif_params(vpifparams, channel_id, found); + + regw(0x80, VPIF_REQ_SIZE); + regw(0x01, VPIF_EMULATION_CTRL); + + return found; +} +EXPORT_SYMBOL(vpif_set_video_params); + +void vpif_set_vbi_display_params(struct vpif_vbi_params *vbiparams, + u8 channel_id) +{ + u32 value; + + value = 0x3F8 & (vbiparams->hstart0); + value |= 0x3FFFFFF & ((vbiparams->vstart0) << 16); + regw(value, vpifregs[channel_id].vanc0_strt); + + value = 0x3F8 & (vbiparams->hstart1); + value |= 0x3FFFFFF & ((vbiparams->vstart1) << 16); + regw(value, vpifregs[channel_id].vanc1_strt); + + value = 0x3F8 & (vbiparams->hsize0); + value |= 0x3FFFFFF & ((vbiparams->vsize0) << 16); + regw(value, vpifregs[channel_id].vanc0_size); + + value = 0x3F8 & (vbiparams->hsize1); + value |= 0x3FFFFFF & ((vbiparams->vsize1) << 16); + regw(value, vpifregs[channel_id].vanc1_size); + +} +EXPORT_SYMBOL(vpif_set_vbi_display_params); + +int vpif_channel_getfid(u8 channel_id) +{ + return (regr(vpifregs[channel_id].ch_ctrl) & VPIF_CH_FID_MASK) + >> VPIF_CH_FID_SHIFT; +} +EXPORT_SYMBOL(vpif_channel_getfid); + +void vpif_base_addr_init(void __iomem *base) +{ + vpif_base = base; +} +EXPORT_SYMBOL(vpif_base_addr_init); diff --git a/drivers/media/video/davinci/vpif.h b/drivers/media/video/davinci/vpif.h new file mode 100644 index 0000000..944f1e1 --- /dev/null +++ b/drivers/media/video/davinci/vpif.h @@ -0,0 +1,632 @@ +/* + * VPIF header file + * + * Copyright (C) 2009 Texas Instruments Incorporated - http://www.ti.com/ + * + * This program is free software; you can redistribute it and/or + * modify it under the terms of the GNU General Public License as + * published by the Free Software Foundation version 2. + * + * This program is distributed .as is. WITHOUT ANY WARRANTY of any + * kind, whether express or implied; without even the implied warranty + * of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the + * GNU General Public License for more details. + */ + +#ifndef VPIF_H +#define VPIF_H + +#include <linux/io.h> +#include <linux/videodev2.h> +#include <mach/hardware.h> + +/* Maximum channel allowed */ +#define VPIF_NUM_CHANNELS (4) +#define VPIF_CAPTURE_NUM_CHANNELS (2) +#define VPIF_DISPLAY_NUM_CHANNELS (2) + +/* Macros to read/write registers */ +static void __iomem *vpif_base; +#define regr(reg) readl((reg) + vpif_base) +#define regw(value, reg) writel(value, (reg + vpif_base)) + +/* Register Addresss Offsets */ +#define VPIF_PID (0x0000) +#define VPIF_CH0_CTRL (0x0004) +#define VPIF_CH1_CTRL (0x0008) +#define VPIF_CH2_CTRL (0x000C) +#define VPIF_CH3_CTRL (0x0010) + +#define VPIF_INTEN (0x0020) +#define VPIF_INTEN_SET (0x0024) +#define VPIF_INTEN_CLR (0x0028) +#define VPIF_STATUS (0x002C) +#define VPIF_STATUS_CLR (0x0030) +#define VPIF_EMULATION_CTRL (0x0034) +#define VPIF_REQ_SIZE (0x0038) + +#define VPIF_CH0_TOP_STRT_ADD_LUMA (0x0040) +#define VPIF_CH0_BTM_STRT_ADD_LUMA (0x0044) +#define VPIF_CH0_TOP_STRT_ADD_CHROMA (0x0048) +#define VPIF_CH0_BTM_STRT_ADD_CHROMA (0x004c) +#define VPIF_CH0_TOP_STRT_ADD_HANC (0x0050) +#define VPIF_CH0_BTM_STRT_ADD_HANC (0x0054) +#define VPIF_CH0_TOP_STRT_ADD_VANC (0x0058) +#define VPIF_CH0_BTM_STRT_ADD_VANC (0x005c) +#define VPIF_CH0_SP_CFG (0x0060) +#define VPIF_CH0_IMG_ADD_OFST (0x0064) +#define VPIF_CH0_HANC_ADD_OFST (0x0068) +#define VPIF_CH0_H_CFG (0x006c) +#define VPIF_CH0_V_CFG_00 (0x0070) +#define VPIF_CH0_V_CFG_01 (0x0074) +#define VPIF_CH0_V_CFG_02 (0x0078) +#define VPIF_CH0_V_CFG_03 (0x007c) + +#define VPIF_CH1_TOP_STRT_ADD_LUMA (0x0080) +#define VPIF_CH1_BTM_STRT_ADD_LUMA (0x0084) +#define VPIF_CH1_TOP_STRT_ADD_CHROMA (0x0088) +#define VPIF_CH1_BTM_STRT_ADD_CHROMA (0x008c) +#define VPIF_CH1_TOP_STRT_ADD_HANC (0x0090) +#define VPIF_CH1_BTM_STRT_ADD_HANC (0x0094) +#define VPIF_CH1_TOP_STRT_ADD_VANC (0x0098) +#define VPIF_CH1_BTM_STRT_ADD_VANC (0x009c) +#define VPIF_CH1_SP_CFG (0x00a0) +#define VPIF_CH1_IMG_ADD_OFST (0x00a4) +#define VPIF_CH1_HANC_ADD_OFST (0x00a8) +#define VPIF_CH1_H_CFG (0x00ac) +#define VPIF_CH1_V_CFG_00 (0x00b0) +#define VPIF_CH1_V_CFG_01 (0x00b4) +#define VPIF_CH1_V_CFG_02 (0x00b8) +#define VPIF_CH1_V_CFG_03 (0x00bc) + +#define VPIF_CH2_TOP_STRT_ADD_LUMA (0x00c0) +#define VPIF_CH2_BTM_STRT_ADD_LUMA (0x00c4) +#define VPIF_CH2_TOP_STRT_ADD_CHROMA (0x00c8) +#define VPIF_CH2_BTM_STRT_ADD_CHROMA (0x00cc) +#define VPIF_CH2_TOP_STRT_ADD_HANC (0x00d0) +#define VPIF_CH2_BTM_STRT_ADD_HANC (0x00d4) +#define VPIF_CH2_TOP_STRT_ADD_VANC (0x00d8) +#define VPIF_CH2_BTM_STRT_ADD_VANC (0x00dc) +#define VPIF_CH2_SP_CFG (0x00e0) +#define VPIF_CH2_IMG_ADD_OFST (0x00e4) +#define VPIF_CH2_HANC_ADD_OFST (0x00e8) +#define VPIF_CH2_H_CFG (0x00ec) +#define VPIF_CH2_V_CFG_00 (0x00f0) +#define VPIF_CH2_V_CFG_01 (0x00f4) +#define VPIF_CH2_V_CFG_02 (0x00f8) +#define VPIF_CH2_V_CFG_03 (0x00fc) +#define VPIF_CH2_HANC0_STRT (0x0100) +#define VPIF_CH2_HANC0_SIZE (0x0104) +#define VPIF_CH2_HANC1_STRT (0x0108) +#define VPIF_CH2_HANC1_SIZE (0x010c) +#define VPIF_CH2_VANC0_STRT (0x0110) +#define VPIF_CH2_VANC0_SIZE (0x0114) +#define VPIF_CH2_VANC1_STRT (0x0118) +#define VPIF_CH2_VANC1_SIZE (0x011c) + +#define VPIF_CH3_TOP_STRT_ADD_LUMA (0x0140) +#define VPIF_CH3_BTM_STRT_ADD_LUMA (0x0144) +#define VPIF_CH3_TOP_STRT_ADD_CHROMA (0x0148) +#define VPIF_CH3_BTM_STRT_ADD_CHROMA (0x014c) +#define VPIF_CH3_TOP_STRT_ADD_HANC (0x0150) +#define VPIF_CH3_BTM_STRT_ADD_HANC (0x0154) +#define VPIF_CH3_TOP_STRT_ADD_VANC (0x0158) +#define VPIF_CH3_BTM_STRT_ADD_VANC (0x015c) +#define VPIF_CH3_SP_CFG (0x0160) +#define VPIF_CH3_IMG_ADD_OFST (0x0164) +#define VPIF_CH3_HANC_ADD_OFST (0x0168) +#define VPIF_CH3_H_CFG (0x016c) +#define VPIF_CH3_V_CFG_00 (0x0170) +#define VPIF_CH3_V_CFG_01 (0x0174) +#define VPIF_CH3_V_CFG_02 (0x0178) +#define VPIF_CH3_V_CFG_03 (0x017c) +#define VPIF_CH3_HANC0_STRT (0x0180) +#define VPIF_CH3_HANC0_SIZE (0x0184) +#define VPIF_CH3_HANC1_STRT (0x0188) +#define VPIF_CH3_HANC1_SIZE (0x018c) +#define VPIF_CH3_VANC0_STRT (0x0190) +#define VPIF_CH3_VANC0_SIZE (0x0194) +#define VPIF_CH3_VANC1_STRT (0x0198) +#define VPIF_CH3_VANC1_SIZE (0x019c) + +#define VPIF_IODFT_CTRL (0x01c0) + +/* Functions for bit Manipulation */ +static inline void vpif_set_bit(u32 reg, u32 bit) +{ + regw((regr(reg)) | (0x01 << bit), reg); +} + +static inline void vpif_clr_bit(u32 reg, u32 bit) +{ + regw(((regr(reg)) & ~(0x01 << bit)), reg); +} + +/* Macro for Generating mask */ +#ifdef GENERATE_MASK +#undef GENERATE_MASK +#endif + +#define GENERATE_MASK(bits, pos) \ + ((((0xFFFFFFFF) << (32 - bits)) >> (32 - bits)) << pos) + +/* Bit positions in the channel control registers */ +#define VPIF_CH_DATA_MODE_BIT (2) +#define VPIF_CH_YC_MUX_BIT (3) +#define VPIF_CH_SDR_FMT_BIT (4) +#define VPIF_CH_HANC_EN_BIT (8) +#define VPIF_CH_VANC_EN_BIT (9) + +#define VPIF_CAPTURE_CH_NIP (10) +#define VPIF_DISPLAY_CH_NIP (11) + +#define VPIF_DISPLAY_PIX_EN_BIT (10) + +#define VPIF_CH_INPUT_FIELD_FRAME_BIT (12) + +#define VPIF_CH_FID_POLARITY_BIT (15) +#define VPIF_CH_V_VALID_POLARITY_BIT (14) +#define VPIF_CH_H_VALID_POLARITY_BIT (13) +#define VPIF_CH_DATA_WIDTH_BIT (28) + +#define VPIF_CH_CLK_EDGE_CTRL_BIT (31) + +/* Mask various length */ +#define VPIF_CH_EAVSAV_MASK GENERATE_MASK(13, 0) +#define VPIF_CH_LEN_MASK GENERATE_MASK(12, 0) +#define VPIF_CH_WIDTH_MASK GENERATE_MASK(13, 0) +#define VPIF_CH_LEN_SHIFT (16) + +/* VPIF masks for registers */ +#define VPIF_REQ_SIZE_MASK (0x1ff) + +/* bit posotion of interrupt vpif_ch_intr register */ +#define VPIF_INTEN_FRAME_CH0 (0x00000001) +#define VPIF_INTEN_FRAME_CH1 (0x00000002) +#define VPIF_INTEN_FRAME_CH2 (0x00000004) +#define VPIF_INTEN_FRAME_CH3 (0x00000008) + +/* bit position of clock and channel enable in vpif_chn_ctrl register */ + +#define VPIF_CH0_CLK_EN (0x00000002) +#define VPIF_CH0_EN (0x00000001) +#define VPIF_CH1_CLK_EN (0x00000002) +#define VPIF_CH1_EN (0x00000001) +#define VPIF_CH2_CLK_EN (0x00000002) +#define VPIF_CH2_EN (0x00000001) +#define VPIF_CH3_CLK_EN (0x00000002) +#define VPIF_CH3_EN (0x00000001) +#define VPIF_CH_CLK_EN (0x00000002) +#define VPIF_CH_EN (0x00000001) + +#define VPIF_INT_TOP (0x00) +#define VPIF_INT_BOTTOM (0x01) +#define VPIF_INT_BOTH (0x02) + +#define VPIF_CH0_INT_CTRL_SHIFT (6) +#define VPIF_CH1_INT_CTRL_SHIFT (6) +#define VPIF_CH2_INT_CTRL_SHIFT (6) +#define VPIF_CH3_INT_CTRL_SHIFT (6) +#define VPIF_CH_INT_CTRL_SHIFT (6) + +/* enabled interrupt on both the fields on vpid_ch0_ctrl register */ +#define channel0_intr_assert() (regw((regr(VPIF_CH0_CTRL)|\ + (VPIF_INT_BOTH << VPIF_CH0_INT_CTRL_SHIFT)), VPIF_CH0_CTRL)) + +/* enabled interrupt on both the fields on vpid_ch1_ctrl register */ +#define channel1_intr_assert() (regw((regr(VPIF_CH1_CTRL)|\ + (VPIF_INT_BOTH << VPIF_CH1_INT_CTRL_SHIFT)), VPIF_CH1_CTRL)) + +/* enabled interrupt on both the fields on vpid_ch0_ctrl register */ +#define channel2_intr_assert() (regw((regr(VPIF_CH2_CTRL)|\ + (VPIF_INT_BOTH << VPIF_CH2_INT_CTRL_SHIFT)), VPIF_CH2_CTRL)) + +/* enabled interrupt on both the fields on vpid_ch1_ctrl register */ +#define channel3_intr_assert() (regw((regr(VPIF_CH3_CTRL)|\ + (VPIF_INT_BOTH << VPIF_CH3_INT_CTRL_SHIFT)), VPIF_CH3_CTRL)) + +#define VPIF_CH_FID_MASK (0x20) +#define VPIF_CH_FID_SHIFT (5) + +#define VPIF_NTSC_VBI_START_FIELD0 (1) +#define VPIF_NTSC_VBI_START_FIELD1 (263) +#define VPIF_PAL_VBI_START_FIELD0 (624) +#define VPIF_PAL_VBI_START_FIELD1 (311) + +#define VPIF_NTSC_HBI_START_FIELD0 (1) +#define VPIF_NTSC_HBI_START_FIELD1 (263) +#define VPIF_PAL_HBI_START_FIELD0 (624) +#define VPIF_PAL_HBI_START_FIELD1 (311) + +#define VPIF_NTSC_VBI_COUNT_FIELD0 (20) +#define VPIF_NTSC_VBI_COUNT_FIELD1 (19) +#define VPIF_PAL_VBI_COUNT_FIELD0 (24) +#define VPIF_PAL_VBI_COUNT_FIELD1 (25) + +#define VPIF_NTSC_HBI_COUNT_FIELD0 (263) +#define VPIF_NTSC_HBI_COUNT_FIELD1 (262) +#define VPIF_PAL_HBI_COUNT_FIELD0 (312) +#define VPIF_PAL_HBI_COUNT_FIELD1 (313) + +#define VPIF_NTSC_VBI_SAMPLES_PER_LINE (720) +#define VPIF_PAL_VBI_SAMPLES_PER_LINE (720) +#define VPIF_NTSC_HBI_SAMPLES_PER_LINE (268) +#define VPIF_PAL_HBI_SAMPLES_PER_LINE (280) + +#define VPIF_CH_VANC_EN (0x20) +#define VPIF_DMA_REQ_SIZE (0x080) +#define VPIF_EMULATION_DISABLE (0x01) + +extern u8 irq_vpif_capture_channel[VPIF_NUM_CHANNELS]; + +/* inline function to enable/disable channel0 */ +static inline void enable_channel0(int enable) +{ + if (enable) + regw((regr(VPIF_CH0_CTRL) | (VPIF_CH0_EN)), VPIF_CH0_CTRL); + else + regw((regr(VPIF_CH0_CTRL) & (~VPIF_CH0_EN)), VPIF_CH0_CTRL); +} + +/* inline function to enable/disable channel1 */ +static inline void enable_channel1(int enable) +{ + if (enable) + regw((regr(VPIF_CH1_CTRL) | (VPIF_CH1_EN)), VPIF_CH1_CTRL); + else + regw((regr(VPIF_CH1_CTRL) & (~VPIF_CH1_EN)), VPIF_CH1_CTRL); +} + +/* inline function to enable interrupt for channel0 */ +static inline void channel0_intr_enable(int enable) +{ + if (enable) { + regw((regr(VPIF_INTEN) | 0x10), VPIF_INTEN); + regw((regr(VPIF_INTEN_SET) | 0x10), VPIF_INTEN_SET); + + regw((regr(VPIF_INTEN) | VPIF_INTEN_FRAME_CH0), VPIF_INTEN); + regw((regr(VPIF_INTEN_SET) | VPIF_INTEN_FRAME_CH0), + VPIF_INTEN_SET); + } else { + regw((regr(VPIF_INTEN) & (~VPIF_INTEN_FRAME_CH0)), VPIF_INTEN); + regw((regr(VPIF_INTEN_SET) | VPIF_INTEN_FRAME_CH0), + VPIF_INTEN_SET); + } +} + +/* inline function to enable interrupt for channel1 */ +static inline void channel1_intr_enable(int enable) +{ + if (enable) { + regw((regr(VPIF_INTEN) | 0x10), VPIF_INTEN); + regw((regr(VPIF_INTEN_SET) | 0x10), VPIF_INTEN_SET); + + regw((regr(VPIF_INTEN) | VPIF_INTEN_FRAME_CH1), VPIF_INTEN); + regw((regr(VPIF_INTEN_SET) | VPIF_INTEN_FRAME_CH1), + VPIF_INTEN_SET); + } else { + regw((regr(VPIF_INTEN) & (~VPIF_INTEN_FRAME_CH1)), VPIF_INTEN); + regw((regr(VPIF_INTEN_SET) | VPIF_INTEN_FRAME_CH1), + VPIF_INTEN_SET); + } +} + +/* inline function to set buffer addresses in case of Y/C non mux mode */ +static inline void ch0_set_videobuf_addr_yc_nmux(unsigned long top_strt_luma, + unsigned long btm_strt_luma, + unsigned long top_strt_chroma, + unsigned long btm_strt_chroma) +{ + regw(top_strt_luma, VPIF_CH0_TOP_STRT_ADD_LUMA); + regw(btm_strt_luma, VPIF_CH0_BTM_STRT_ADD_LUMA); + regw(top_strt_chroma, VPIF_CH1_TOP_STRT_ADD_CHROMA); + regw(btm_strt_chroma, VPIF_CH1_BTM_STRT_ADD_CHROMA); +} + +/* inline function to set buffer addresses in VPIF registers for video data */ +static inline void ch0_set_videobuf_addr(unsigned long top_strt_luma, + unsigned long btm_strt_luma, + unsigned long top_strt_chroma, + unsigned long btm_strt_chroma) +{ + regw(top_strt_luma, VPIF_CH0_TOP_STRT_ADD_LUMA); + regw(btm_strt_luma, VPIF_CH0_BTM_STRT_ADD_LUMA); + regw(top_strt_chroma, VPIF_CH0_TOP_STRT_ADD_CHROMA); + regw(btm_strt_chroma, VPIF_CH0_BTM_STRT_ADD_CHROMA); +} + +static inline void ch1_set_videobuf_addr(unsigned long top_strt_luma, + unsigned long btm_strt_luma, + unsigned long top_strt_chroma, + unsigned long btm_strt_chroma) +{ + + regw(top_strt_luma, VPIF_CH1_TOP_STRT_ADD_LUMA); + regw(btm_strt_luma, VPIF_CH1_BTM_STRT_ADD_LUMA); + regw(top_strt_chroma, VPIF_CH1_TOP_STRT_ADD_CHROMA); + regw(btm_strt_chroma, VPIF_CH1_BTM_STRT_ADD_CHROMA); +} + +static inline void ch0_set_vbi_addr(unsigned long top_vbi, + unsigned long btm_vbi, unsigned long a, unsigned long b) +{ + regw(top_vbi, VPIF_CH0_TOP_STRT_ADD_VANC); + regw(btm_vbi, VPIF_CH0_BTM_STRT_ADD_VANC); +} + +static inline void ch0_set_hbi_addr(unsigned long top_vbi, + unsigned long btm_vbi, unsigned long a, unsigned long b) +{ + regw(top_vbi, VPIF_CH0_TOP_STRT_ADD_HANC); + regw(btm_vbi, VPIF_CH0_BTM_STRT_ADD_HANC); +} + +static inline void ch1_set_vbi_addr(unsigned long top_vbi, + unsigned long btm_vbi, unsigned long a, unsigned long b) +{ + regw(top_vbi, VPIF_CH1_TOP_STRT_ADD_VANC); + regw(btm_vbi, VPIF_CH1_BTM_STRT_ADD_VANC); +} + +static inline void ch1_set_hbi_addr(unsigned long top_vbi, + unsigned long btm_vbi, unsigned long a, unsigned long b) +{ + regw(top_vbi, VPIF_CH1_TOP_STRT_ADD_HANC); + regw(btm_vbi, VPIF_CH1_BTM_STRT_ADD_HANC); +} + +/* Inline function to enable raw vbi in the given channel */ +static inline void disable_raw_feature(u8 channel_id, u8 index) +{ + u32 ctrl_reg; + if (0 == channel_id) + ctrl_reg = VPIF_CH0_CTRL; + else + ctrl_reg = VPIF_CH1_CTRL; + + if (1 == index) + vpif_clr_bit(ctrl_reg, VPIF_CH_VANC_EN_BIT); + else + vpif_clr_bit(ctrl_reg, VPIF_CH_HANC_EN_BIT); +} + +static inline void enable_raw_feature(u8 channel_id, u8 index) +{ + u32 ctrl_reg; + if (0 == channel_id) + ctrl_reg = VPIF_CH0_CTRL; + else + ctrl_reg = VPIF_CH1_CTRL; + + if (1 == index) + vpif_set_bit(ctrl_reg, VPIF_CH_VANC_EN_BIT); + else + vpif_set_bit(ctrl_reg, VPIF_CH_HANC_EN_BIT); +} + +/* inline function to enable/disable channel2 */ +static inline void enable_channel2(int enable) +{ + if (enable) { + regw((regr(VPIF_CH2_CTRL) | (VPIF_CH2_CLK_EN)), VPIF_CH2_CTRL); + regw((regr(VPIF_CH2_CTRL) | (VPIF_CH2_EN)), VPIF_CH2_CTRL); + } else { + regw((regr(VPIF_CH2_CTRL) & (~VPIF_CH2_CLK_EN)), VPIF_CH2_CTRL); + regw((regr(VPIF_CH2_CTRL) & (~VPIF_CH2_EN)), VPIF_CH2_CTRL); + } +} + +/* inline function to enable/disable channel3 */ +static inline void enable_channel3(int enable) +{ + if (enable) { + regw((regr(VPIF_CH3_CTRL) | (VPIF_CH3_CLK_EN)), VPIF_CH3_CTRL); + regw((regr(VPIF_CH3_CTRL) | (VPIF_CH3_EN)), VPIF_CH3_CTRL); + } else { + regw((regr(VPIF_CH3_CTRL) & (~VPIF_CH3_CLK_EN)), VPIF_CH3_CTRL); + regw((regr(VPIF_CH3_CTRL) & (~VPIF_CH3_EN)), VPIF_CH3_CTRL); + } +} + +/* inline function to enable interrupt for channel2 */ +static inline void channel2_intr_enable(int enable) +{ + if (enable) { + regw((regr(VPIF_INTEN) | 0x10), VPIF_INTEN); + regw((regr(VPIF_INTEN_SET) | 0x10), VPIF_INTEN_SET); + regw((regr(VPIF_INTEN) | VPIF_INTEN_FRAME_CH2), VPIF_INTEN); + regw((regr(VPIF_INTEN_SET) | VPIF_INTEN_FRAME_CH2), + VPIF_INTEN_SET); + } else { + regw((regr(VPIF_INTEN) & (~VPIF_INTEN_FRAME_CH2)), VPIF_INTEN); + regw((regr(VPIF_INTEN_SET) | VPIF_INTEN_FRAME_CH2), + VPIF_INTEN_SET); + } +} + +/* inline function to enable interrupt for channel3 */ +static inline void channel3_intr_enable(int enable) +{ + if (enable) { + regw((regr(VPIF_INTEN) | 0x10), VPIF_INTEN); + regw((regr(VPIF_INTEN_SET) | 0x10), VPIF_INTEN_SET); + + regw((regr(VPIF_INTEN) | VPIF_INTEN_FRAME_CH3), VPIF_INTEN); + regw((regr(VPIF_INTEN_SET) | VPIF_INTEN_FRAME_CH3), + VPIF_INTEN_SET); + } else { + regw((regr(VPIF_INTEN) & (~VPIF_INTEN_FRAME_CH3)), VPIF_INTEN); + regw((regr(VPIF_INTEN_SET) | VPIF_INTEN_FRAME_CH3), + VPIF_INTEN_SET); + } +} + +/* inline function to enable raw vbi data for channel2 */ +static inline void channel2_raw_enable(int enable, u8 index) +{ + u32 mask; + + if (1 == index) + mask = VPIF_CH_VANC_EN_BIT; + else + mask = VPIF_CH_HANC_EN_BIT; + + if (enable) + vpif_set_bit(VPIF_CH2_CTRL, mask); + else + vpif_clr_bit(VPIF_CH2_CTRL, mask); +} + +/* inline function to enable raw vbi data for channel3*/ +static inline void channel3_raw_enable(int enable, u8 index) +{ + u32 mask; + + if (1 == index) + mask = VPIF_CH_VANC_EN_BIT; + else + mask = VPIF_CH_HANC_EN_BIT; + + if (enable) + vpif_set_bit(VPIF_CH3_CTRL, mask); + else + vpif_clr_bit(VPIF_CH3_CTRL, mask); +} + +/* inline function to set buffer addresses in case of Y/C non mux mode */ +static inline void ch2_set_videobuf_addr_yc_nmux(unsigned long top_strt_luma, + unsigned long btm_strt_luma, + unsigned long top_strt_chroma, + unsigned long btm_strt_chroma) +{ + regw(top_strt_luma, VPIF_CH2_TOP_STRT_ADD_LUMA); + regw(btm_strt_luma, VPIF_CH2_BTM_STRT_ADD_LUMA); + regw(top_strt_chroma, VPIF_CH3_TOP_STRT_ADD_CHROMA); + regw(btm_strt_chroma, VPIF_CH3_BTM_STRT_ADD_CHROMA); +} + +/* inline function to set buffer addresses in VPIF registers for video data */ +static inline void ch2_set_videobuf_addr(unsigned long top_strt_luma, + unsigned long btm_strt_luma, + unsigned long top_strt_chroma, + unsigned long btm_strt_chroma) +{ + regw(top_strt_luma, VPIF_CH2_TOP_STRT_ADD_LUMA); + regw(btm_strt_luma, VPIF_CH2_BTM_STRT_ADD_LUMA); + regw(top_strt_chroma, VPIF_CH2_TOP_STRT_ADD_CHROMA); + regw(btm_strt_chroma, VPIF_CH2_BTM_STRT_ADD_CHROMA); +} + +static inline void ch3_set_videobuf_addr(unsigned long top_strt_luma, + unsigned long btm_strt_luma, + unsigned long top_strt_chroma, + unsigned long btm_strt_chroma) +{ + regw(top_strt_luma, VPIF_CH3_TOP_STRT_ADD_LUMA); + regw(btm_strt_luma, VPIF_CH3_BTM_STRT_ADD_LUMA); + regw(top_strt_chroma, VPIF_CH3_TOP_STRT_ADD_CHROMA); + regw(btm_strt_chroma, VPIF_CH3_BTM_STRT_ADD_CHROMA); +} + +/* inline function to set buffer addresses in VPIF registers for vbi data */ +static inline void ch2_set_vbi_addr(unsigned long top_strt_luma, + unsigned long btm_strt_luma, + unsigned long top_strt_chroma, + unsigned long btm_strt_chroma) +{ + regw(top_strt_luma, VPIF_CH2_TOP_STRT_ADD_VANC); + regw(btm_strt_luma, VPIF_CH2_BTM_STRT_ADD_VANC); +} + +static inline void ch3_set_vbi_addr(unsigned long top_strt_luma, + unsigned long btm_strt_luma, + unsigned long top_strt_chroma, + unsigned long btm_strt_chroma) +{ + regw(top_strt_luma, VPIF_CH3_TOP_STRT_ADD_VANC); + regw(btm_strt_luma, VPIF_CH3_BTM_STRT_ADD_VANC); +} + +#define VPIF_MAX_NAME (30) + +/* This structure will store size parameters as per the mode selected by user */ +struct vpif_channel_config_params { + char name[VPIF_MAX_NAME]; /* Name of the mode */ + u16 width; /* Indicates width of the image */ + u16 height; /* Indicates height of the image */ + u8 fps; + u8 frm_fmt; /* Indicates whether this is interlaced + * or progressive format */ + u8 ycmux_mode; /* Indicates whether this mode requires + * single or two channels */ + u16 eav2sav; /* length of sav 2 eav */ + u16 sav2eav; /* length of sav 2 eav */ + u16 l1, l3, l5, l7, l9, l11; /* Other parameter configurations */ + u16 vsize; /* Vertical size of the image */ + u8 capture_format; /* Indicates whether capture format + * is in BT or in CCD/CMOS */ + u8 vbi_supported; /* Indicates whether this mode + * supports capturing vbi or not */ + u8 hd_sd; + v4l2_std_id stdid; +}; + +struct vpif_interface; +struct vpif_params; +struct vpif_vbi_params; + +int vpif_set_video_params(struct vpif_params *vpifparams, u8 channel_id); +void vpif_set_vbi_display_params(struct vpif_vbi_params *vbiparams, + u8 channel_id); +int vpif_channel_getfid(u8 channel_id); +void vpif_base_addr_init(void __iomem *base); + +/* Enumerated data types */ +enum vpif_capture_pinpol { + VPIF_CAPTURE_PINPOL_SAME = 0, + VPIF_CAPTURE_PINPOL_INVERT = 1 +}; + +enum data_size { + _8BITS = 0, + _10BITS, + _12BITS, +}; + +struct vpif_capture_params_raw { + enum data_size data_sz; + enum vpif_capture_pinpol fid_pol; + enum vpif_capture_pinpol vd_pol; + enum vpif_capture_pinpol hd_pol; +}; + +/* Structure for vpif parameters for raw vbi data */ +struct vpif_vbi_params { + __u32 hstart0; /* Horizontal start of raw vbi data for first field */ + __u32 vstart0; /* Vertical start of raw vbi data for first field */ + __u32 hsize0; /* Horizontal size of raw vbi data for first field */ + __u32 vsize0; /* Vertical size of raw vbi data for first field */ + __u32 hstart1; /* Horizontal start of raw vbi data for second field */ + __u32 vstart1; /* Vertical start of raw vbi data for second field */ + __u32 hsize1; /* Horizontal size of raw vbi data for second field */ + __u32 vsize1; /* Vertical size of raw vbi data for second field */ +}; + +/* structure for vpif parameters */ +struct vpif_interface { + __u8 storage_mode; /* Indicates field or frame mode */ + unsigned long hpitch; + v4l2_std_id stdid; +}; + +struct vpif_params { + struct vpif_interface video_params; + struct vpif_channel_config_params std_info; + union param { + struct vpif_vbi_params vbi_params; + struct vpif_capture_params_raw raw_params; + } params; +}; + +#endif /* End of #ifndef VPIF_H */ + -- 1.5.6 -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
