Hi Everyone, I have a Compro VideoMate T750F which is not working under Ubuntu 9.04 BETA. I get the same result as davor emard <davoremard <at> gmail.com> posted 2009-01-19 11:45:46 GMT. The relevant part of the dmesg below, perhaps the 'BUG: unable to handle kernel paging request at fffffff4' part is part of the problem? I have pasted the attached xc3028-v27.fw created in Ubuntu 8.10 into /lib/firmware but still no go. Thanks, Andrew [ 10.377283] Linux video capture interface: v2.00 [ 10.516423] saa7130/34: v4l2 driver version 0.2.14 loaded [ 10.517059] ACPI: PCI Interrupt Link [APC1] enabled at IRQ 16 [ 10.517072] saa7134 0000:04:08.0: PCI INT A -> Link[APC1] -> GSI 16 (level, low) -> IRQ 16 [ 10.517079] saa7133[0]: found at 0000:04:08.0, rev: 209, irq: 16, latency: 32, mmio: 0xfdbfe000 [ 10.517085] saa7133[0]: subsystem: 185b:c900, board: Compro VideoMate T750 [card=139,autodetected] [ 10.517237] saa7133[0]: board init: gpio is 84bf00 [ 10.517246] saa7133[0]: Oops: IR config error [card=139] [ 10.580657] ACPI: PCI Interrupt Link [AAZA] enabled at IRQ 23 [ 10.580663] HDA Intel 0000:00:10.1: PCI INT B -> Link[AAZA] -> GSI 23 (level, low) -> IRQ 23 [ 10.580723] HDA Intel 0000:00:10.1: setting latency timer to 64 [ 10.668027] saa7133[0]: i2c eeprom 00: 5b 18 00 c9 54 20 1c 00 43 43 a9 1c 55 d2 b2 92 [ 10.668036] saa7133[0]: i2c eeprom 10: 00 ff 86 0f ff 20 ff ff ff ff ff ff ff ff ff ff [ 10.668045] saa7133[0]: i2c eeprom 20: 01 40 01 02 02 01 03 01 08 ff 00 87 ff ff ff ff [ 10.668053] saa7133[0]: i2c eeprom 30: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.668061] saa7133[0]: i2c eeprom 40: ff d7 00 c4 86 1e 05 ff 02 c2 ff 01 c6 ff 05 ff [ 10.668069] saa7133[0]: i2c eeprom 50: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff cb [ 10.668077] saa7133[0]: i2c eeprom 60: 35 ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.668085] saa7133[0]: i2c eeprom 70: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.668093] saa7133[0]: i2c eeprom 80: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.668101] saa7133[0]: i2c eeprom 90: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.668108] saa7133[0]: i2c eeprom a0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.668116] saa7133[0]: i2c eeprom b0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.668124] saa7133[0]: i2c eeprom c0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.668132] saa7133[0]: i2c eeprom d0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.668140] saa7133[0]: i2c eeprom e0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.668148] saa7133[0]: i2c eeprom f0: ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff ff [ 10.685023] tuner' 2-0062: chip found @ 0xc4 (saa7133[0]) [ 10.692029] tuner' 2-0063: chip found @ 0xc6 (saa7133[0]) [ 10.700028] tuner' 2-0068: chip found @ 0xd0 (saa7133[0]) [ 10.721926] xc2028 2-0062: creating new instance [ 10.721930] xc2028 2-0062: type set to XCeive xc2028/xc3028 tuner [ 10.721944] BUG: unable to handle kernel paging request at fffffff4 [ 10.721949] IP: [<f7f822c0>] saa7134_board_init2+0x140/0x710 [saa7134] [ 10.721963] *pde = 007bd067 *pte = 00000000 [ 10.721967] Oops: 0000 [#1] SMP [ 10.721970] last sysfs file: /sys/module/videodev/initstate [ 10.721973] Dumping ftrace buffer: [ 10.721976] (ftrace buffer empty) [ 10.721978] Modules linked in: tuner_xc2028 tuner snd_hda_intel(+) snd_pcm_oss snd_mixer_oss snd_pcm saa7134(+) snd_seq_dummy snd_seq_oss snd_seq_midi snd_rawmidi ir_common snd_seq_midi_event snd_seq videodev v4l1_compat compat_ioctl32 snd_timer snd_seq_device psmouse ppdev v4l2_common videobuf_dma_sg serio_raw pcspkr snd videobuf_core soundcore tveeprom k8temp snd_page_alloc i2c_nforce2 parport_pc parport 8139too 8139cp mii floppy ohci1394 ieee1394 fbcon tileblit font bitblit softcursor [ 10.722007] [ 10.722011] Pid: 1531, comm: modprobe Not tainted (2.6.28-11-generic #37-Ubuntu) System Product Name [ 10.722014] EIP: 0060:[<f7f822c0>] EFLAGS: 00010286 CPU: 1 [ 10.722022] EIP is at saa7134_board_init2+0x140/0x710 [saa7134] [ 10.722025] EAX: 00000000 EBX: 00000000 ECX: f6255c3c EDX: 00000000 [ 10.722027] ESI: 00000000 EDI: 00000000 EBP: 00000000 ESP: f6255c58 [ 10.722029] DS: 007b ES: 007b FS: 00d8 GS: 0033 SS: 0068 [ 10.722032] Process modprobe (pid: 1531, ti=f6254000 task=f60c25b0 task.ti=f6254000) [ 10.722034] Stack: [ 10.722035] 00000303 f6255c5c f6255c5c f61b6000 f6fddc00 f61b6000 f6255cd4 c014ad77 [ 10.722041] 000000d0 f7f84889 656e7574 00000072 000000f0 f61b64b0 00000002 f61b6140 [ 10.722047] f7f8e510 f61b64b0 f6255cd4 f7f8494d 65626f72 642d7000 006d6561 000005fb [ 10.722053] Call Trace: [ 10.722055] [<c014ad77>] ? request_module+0x97/0xf0 [ 10.722061] [<f7f84889>] ? saa7134_i2c_eeprom+0xe9/0x110 [saa7134] [ 10.722072] [<f7f8494d>] ? saa7134_i2c_register+0x9d/0x120 [saa7134] [ 10.722082] [<f7f8d67c>] ? saa7134_initdev+0x3cc/0x8d5 [saa7134] [ 10.722094] [<c02dc1be>] ? pci_device_probe+0x5e/0x80 [ 10.722100] [<c034f124>] ? really_probe+0x54/0x180 [ 10.722104] [<c02db9ee>] ? pci_match_device+0xbe/0xd0 [ 10.722110] [<c034f28e>] ? driver_probe_device+0x3e/0x50 [ 10.722113] [<c034f329>] ? __driver_attach+0x89/0x90 [ 10.722117] [<c034ea63>] ? bus_for_each_dev+0x53/0x80 [ 10.722121] [<c02dc100>] ? pci_device_remove+0x0/0x40 [ 10.722125] [<c034efe9>] ? driver_attach+0x19/0x20 [ 10.722128] [<c034f2a0>] ? __driver_attach+0x0/0x90 [ 10.722131] [<c034e43f>] ? bus_add_driver+0x1af/0x230 [ 10.722135] [<c02dc100>] ? pci_device_remove+0x0/0x40 [ 10.722139] [<c034f4c9>] ? driver_register+0x69/0x140 [ 10.722144] [<f7f84240>] ? saa7134_init+0x0/0x60 [saa7134] [ 10.722154] [<c02dc41a>] ? __pci_register_driver+0x4a/0x90 [ 10.722158] [<f7f84240>] ? saa7134_init+0x0/0x60 [saa7134] [ 10.722167] [<f7f84292>] ? saa7134_init+0x52/0x60 [saa7134] [ 10.722177] [<c010111e>] ? _stext+0x2e/0x170 [ 10.722180] [<c020be75>] ? sysfs_addrm_finish+0x15/0xf0 [ 10.722185] [<c020b643>] ? sysfs_add_one+0x13/0x50 [ 10.722188] [<c020b6bf>] ? sysfs_addrm_start+0x3f/0xa0 [ 10.722191] [<c01a8fac>] ? __vunmap+0x9c/0xe0 [ 10.722196] [<c01a8fac>] ? __vunmap+0x9c/0xe0 [ 10.722199] [<c0127c7d>] ? update_curr+0x8d/0x1e0 [ 10.722203] [<c012c6dc>] ? enqueue_entity+0x13c/0x360 [ 10.722207] [<c0131bae>] ? resched_task+0x1e/0x70 [ 10.722210] [<c0133b24>] ? try_to_wake_up+0x104/0x290 [ 10.722215] [<c0163f58>] ? sys_init_module+0x88/0x1b0 [ 10.722220] [<c0103f6b>] ? sysenter_do_call+0x12/0x2f [ 10.722223] Code: 30 e8 57 c8 8b 55 90 8b 82 2c 01 00 00 89 5c 24 04 c7 04 24 38 f4 f8 f7 89 44 24 08 e8 13 e8 57 c8 66 90 8b 45 90 e8 40 fd ff ff <8b> 5d f4 31 c0 8b 75 f8 8b 7d fc 89 ec 5d c3 90 8b 4d 90 8b 71 [ 10.722254] EIP: [<f7f822c0>] saa7134_board_init2+0x140/0x710 [saa7134] SS:ESP 0068:f6255c58 [ 10.722265] ---[ end trace 11de26a2ee66d7a6 ]---
Attachment:
xc3028-v27.fw
Description: Binary data
