On Tue, Mar 31, 2009 at 5:35 PM, Gabriele Dini Ciacci <dark.schneider@xxxxxx> wrote: > I it's so, say me how to make or where to look to create a profile for > the existing driver. > > I am willing to do the work. > > (when I first wrote the driver to me it seemed that this was the > simplet way. > > Meanwhile I will try to look at the Cypress FX2 As Michael Krufky pointed out to me off-list, I was not exactly correct here. While there are indeed drivers based on the same FX2 chip in your device, it may be possible to reuse an existing driver, or you may need a whole new driver, depending on how much the firmware varies between your product versus the others. You may want to look at the pvrusb2 and cxusb drivers, which also use the FX2 chip, and see what similarities exist in terms of the API and command set. If it is not similar to any of the others, then writing a new driver is probably the correct approach. Regards, Devin -- Devin J. Heitmueller http://www.devinheitmueller.com AIM: devinheitmueller -- To unsubscribe from this list: send the line "unsubscribe linux-media" in the body of a message to majordomo@xxxxxxxxxxxxxxx More majordomo info at http://vger.kernel.org/majordomo-info.html
